Output Power of AlGaInP Light Emitting Diode Improved by Double Roughening AlGaInP Surfaces

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2010

類型

期刊名稱

ELECTROCHEMICAL AND SOLID STATE LETTERS

卷期與頁次

第 13 卷第 5 期,頁 H163–H165

ISSN

1099-0062

語言

英文

摘要

An AlGaInP-based vertical light emitting diode (LED) comprising double roughened (GaP and n-AlGaInP) surfaces and a bottom metal reflector was fabricated by surface-etching and wafer-bonding technologies. The roughened GaP surface was created by photolithography and wet etching, while the AlGaInP surface was roughened by inductively coupled plasma dry etching. The output power of the double roughened LED could reach 5.88 mW, which was 2.56 times higher than that of the conventional LED. This is because the double roughened surfaces can provide photons multiple chances to escape from the LED surface and can redirect photons.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Huang, P.-W., & Wu, Y. S. (2010). Output Power of AlGaInP Light Emitting Diode Improved by Double Roughening AlGaInP Surfaces. ELECTROCHEMICAL AND SOLID STATE LETTERS, 13(5), H163–H165. https://doi.org/10.1149/1.3339558

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/6209