One-step fabrication of surface-relief diffusers by stress-induced undulations on elastomer

檔案

日期

2009-09-01

類型

期刊名稱

OPTICS AND LASER TECHNOLOGY

卷期與頁次

第 41 卷第 6 期,頁 804–808

ISSN

0030-3992

語言

英文

摘要

In this study, we demonstrated that microscale surface undulations induced by acid treatment could serve as the surface relief on diffusers coated with a layer of PDMS polymer. Since the orientation of undulations was found to be always disordered, these undulations would scatter light uniformly. The periodicity of the undulations could be adjusted by the control of duration of the dipping of the elastomer into H(2)SO(4)/HNO(3) solutions and by the volume ratio of H(2)SO(4)/HNO(3) the solution, resulting in the modulation of diffusing ability of diffusers. The optical properties, transmittance, and light diffusivity, were characterised. This proposed approach offers potential for mass production of surface-relief diffusers. In addition, the proposed method allows the creation of undulations on arbitrary substrates. (C) 2008 Elsevier Ltd. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Wang, J.-H., Chen, C.-F., Ho, J.-R., Shih, T.-K., Chen, C.-C., Whang, W.-T., & Yang, J.-Y. (2009). One-step fabrication of surface-relief diffusers by stress-induced undulations on elastomer. OPTICS AND LASER TECHNOLOGY, 41(6), 804–808. https://doi.org/10.1016/j.optlastec.2008.12.005

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/6720