Novel morphology and solidification behavior of eutectic bismuth-tin (Bi-Sn) nanowires
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
273 | en_US |
dc.citation.issue |
1-2 | en_US |
dc.citation.spage |
270 | en_US |
dc.citation.volume |
481 | en_US |
dc.citation.woscount |
4 | |
dc.contributor.author |
Chen, Shih Hsun | en_US |
dc.contributor.author |
Chen, Chien Chon | en_US |
dc.contributor.author |
Chao, Chuen Guang | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:09:05Z | |
dc.date.available |
2014-12-08T15:09:05Z | |
dc.date.issued |
2009-07-29 | en_US |
dc.description.abstract |
In the present work we show a simple and robust fabrication process for dense and continuous bismuth-tin (Bi-Sn) eutectic nanowires. The Bi-Sn eutectic nanowires of 200 nm diameter and several tens of mu m, in length were fabricated by a vacuum hydraulic force method. The alloy melt was injected into an anodic aluminum oxide (AAO) template to form nanowires after melt solidification. For this process, nanowires were formed from non-atomic deposition with liquid alloy; in this way, the composition of nanowires can be controlled precisely in stoichiometry. The Bi-Sn melt was restricted inside the AAO which has a low thermo-conduction and long period cooling rate around the melt. On the other hand, the heat flow is along the tube Z-axis and the melt is solidified from the AAO bottom to top because of the open pore on the AAO top. The eutectic nanowires were found to be dense and continuous with a uniform diameter throughout the length of the wires and with a lamellar microstructure along the wires' Z-axis. In addition, the alternative segmental compositions showed that the ratio of tin to bismuth is approximately 33:1. (C) 2009 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.jallcom.2009.03.107 | en_US |
dc.identifier.issn |
0925-8388 | en_US |
dc.identifier.journal |
JOURNAL OF ALLOYS AND COMPOUNDS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.jallcom.2009.03.107 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/6929 | |
dc.identifier.wosnumber |
WOS:000267798700060 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Bi-Sn nanowires | en_US |
dc.subject |
Eutectic | en_US |
dc.subject |
AAO | en_US |
dc.subject |
Stoichiometry | en_US |
dc.subject |
Solidification | en_US |
dc.title |
Novel morphology and solidification behavior of eutectic bismuth-tin (Bi-Sn) nanowires | en_US |
dc.type |
Article | en_US |
檔案
- 000267798700060.pdf (616.6 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Chen, S. H., Chen, C. C., & Chao, C. G. (2009). Novel morphology and solidification behavior of eutectic bismuth-tin (Bi-Sn) nanowires. JOURNAL OF ALLOYS AND COMPOUNDS, 481(1-2), 270–273. https://doi.org/10.1016/j.jallcom.2009.03.107
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/6929