Novel morphology and solidification behavior of eutectic bismuth-tin (Bi-Sn) nanowires
檔案
- 000267798700060.pdf (616.6 KB, Adobe PDF)
日期
2009-07-29
類型
系所
期刊名稱
JOURNAL OF ALLOYS AND COMPOUNDS
卷期與頁次
第 481 卷第 1-2 期,頁 270–273
ISSN
0925-8388
語言
英文
摘要
In the present work we show a simple and robust fabrication process for dense and continuous bismuth-tin (Bi-Sn) eutectic nanowires. The Bi-Sn eutectic nanowires of 200 nm diameter and several tens of mu m, in length were fabricated by a vacuum hydraulic force method. The alloy melt was injected into an anodic aluminum oxide (AAO) template to form nanowires after melt solidification. For this process, nanowires were formed from non-atomic deposition with liquid alloy; in this way, the composition of nanowires can be controlled precisely in stoichiometry. The Bi-Sn melt was restricted inside the AAO which has a low thermo-conduction and long period cooling rate around the melt. On the other hand, the heat flow is along the tube Z-axis and the melt is solidified from the AAO bottom to top because of the open pore on the AAO top. The eutectic nanowires were found to be dense and continuous with a uniform diameter throughout the length of the wires and with a lamellar microstructure along the wires' Z-axis. In addition, the alternative segmental compositions showed that the ratio of tin to bismuth is approximately 33:1. (C) 2009 Elsevier B.V. All rights reserved.
所屬典藏
期刊論文引用此條目
Chen, S. H., Chen, C. C., & Chao, C. G. (2009). Novel morphology and solidification behavior of eutectic bismuth-tin (Bi-Sn) nanowires. JOURNAL OF ALLOYS AND COMPOUNDS, 481(1-2), 270–273. https://doi.org/10.1016/j.jallcom.2009.03.107
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/6929