A 5-GHz Differential Low-Noise Amplifier With High Pin-to-Pin ESD Robustness in a 130-nm CMOS Process
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1053 | en_US |
dc.citation.issue |
5 | en_US |
dc.citation.spage |
1044 | en_US |
dc.citation.volume |
57 | en_US |
dc.citation.woscount |
11 | |
dc.contributor.author |
Hsiao, Yuan-Wen | en_US |
dc.contributor.author |
Ker, Ming-Dou | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:09:31Z | |
dc.date.available |
2014-12-08T15:09:31Z | |
dc.date.issued |
2009-05-01 | en_US |
dc.description.abstract |
Two electrostatic discharge (ESD)-protected 5-GHz differential low-noise amplifiers (LNAs) are presented with consideration of pin-to-pin ESD protection. The pin-to-pin ESD issue for differential LNAs is addressed for the first time in the literature. Fabricated in a 130-nm CMOS process, both ESD-protected LNAs consume 10.3 mW under 1.2-V power supply. The first LNA with double-diode ESD protection scheme exhibits the power gain of 17.9 dB and noise figure of 2.43 dB at 5 GHz. Its human-body-model (HBM) and machine-model (MM) ESD levels are 2.5 kV and 200 V, respectively. With the same total parasitic capacitance from ESD protection devices, the second LNA with the proposed double silicon-controlled rectifier (SCR) ESD protection scheme has 6.5-kV HBM and 500-V MM ESD robustness, 17.9-dB power gain, and 2.54-dB noise figure at 5 GHz. The ESD test results have shown that the pin-to-pin ESD test is the most critical ESD-test pin combination for the conventional double-diode ESD protection scheme. With the proposed double-SCR ESD protection scheme, the pin-to-pin ESD robustness can be significantly improved without degrading RF performance. Experimental results have shown that the ESD protection circuit for LNA can be co-designed with the input matching network to simultaneously achieve excellent ESD robustness and RF performance. | en_US |
dc.identifier.doi |
10.1109/TMTT.2009.2017247 | en_US |
dc.identifier.issn |
0018-9480 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TMTT.2009.2017247 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/7261 | |
dc.identifier.wosnumber |
WOS:000266040900004 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Electrostatic discharge (ESD) | en_US |
dc.subject |
low-noise amplifier (LNA) | en_US |
dc.subject |
power-rail ESD clamp circuit | en_US |
dc.subject |
RF integrated circuit (RF IC) | en_US |
dc.subject |
silicon-controlled rectifier (SCR) | en_US |
dc.subject |
substrate-triggered technique | en_US |
dc.title |
A 5-GHz Differential Low-Noise Amplifier With High Pin-to-Pin ESD Robustness in a 130-nm CMOS Process | en_US |
dc.type |
Article | en_US |
檔案
- 000266040900004.pdf (1.44 MB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Hsiao, Y.-W., & Ker, M.-D. (2009). A 5-GHz Differential Low-Noise Amplifier With High Pin-to-Pin ESD Robustness in a 130-nm CMOS Process. IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 57(5), 1044–1053. https://doi.org/10.1109/TMTT.2009.2017247
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/7261