A 5-GHz Differential Low-Noise Amplifier With High Pin-to-Pin ESD Robustness in a 130-nm CMOS Process

檔案

日期

2009-05-01

類型

期刊名稱

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES

卷期與頁次

第 57 卷第 5 期,頁 1044–1053

ISSN

0018-9480

語言

英文

摘要

Two electrostatic discharge (ESD)-protected 5-GHz differential low-noise amplifiers (LNAs) are presented with consideration of pin-to-pin ESD protection. The pin-to-pin ESD issue for differential LNAs is addressed for the first time in the literature. Fabricated in a 130-nm CMOS process, both ESD-protected LNAs consume 10.3 mW under 1.2-V power supply. The first LNA with double-diode ESD protection scheme exhibits the power gain of 17.9 dB and noise figure of 2.43 dB at 5 GHz. Its human-body-model (HBM) and machine-model (MM) ESD levels are 2.5 kV and 200 V, respectively. With the same total parasitic capacitance from ESD protection devices, the second LNA with the proposed double silicon-controlled rectifier (SCR) ESD protection scheme has 6.5-kV HBM and 500-V MM ESD robustness, 17.9-dB power gain, and 2.54-dB noise figure at 5 GHz. The ESD test results have shown that the pin-to-pin ESD test is the most critical ESD-test pin combination for the conventional double-diode ESD protection scheme. With the proposed double-SCR ESD protection scheme, the pin-to-pin ESD robustness can be significantly improved without degrading RF performance. Experimental results have shown that the ESD protection circuit for LNA can be co-designed with the input matching network to simultaneously achieve excellent ESD robustness and RF performance.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Hsiao, Y.-W., & Ker, M.-D. (2009). A 5-GHz Differential Low-Noise Amplifier With High Pin-to-Pin ESD Robustness in a 130-nm CMOS Process. IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 57(5), 1044–1053. https://doi.org/10.1109/TMTT.2009.2017247

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/7261