Full metadata record
DC FieldValueLanguage
dc.contributor.author黃章斌en_US
dc.contributor.authorChang-Pin Huangen_US
dc.contributor.author陳智en_US
dc.contributor.authorChih Chenen_US
dc.date.accessioned2014-12-12T02:41:36Z-
dc.date.available2014-12-12T02:41:36Z-
dc.date.issued2004en_US
dc.identifier.urihttp://140.113.39.130/cdrfb3/record/nctu/#GT009218529en_US
dc.identifier.urihttp://hdl.handle.net/11536/74846-
dc.description.abstract鎳在微電子工業方面有廣泛應,本論文研究共晶SnAg銲錫凸塊和三種厚度Ni/Cu金屬層在多次迴銲和固態之反應,其厚度分別為5μm-Cu/3μm-Ni、3μm-Cu/2μm-Ni、和0μm-Cu/1μm-Ni,研究結果發現150℃固態時效200小時銲錫凸塊剪力強度下降,固態時效500小時和1000小時後剪力強度改變不大,剪力強度下降肇因於Ag3Sn之介金屬化合物粗化和銲錫晶粒成長,而且,在剪力測試結果指示,對銲錫凸塊和1um-Ni反應,長時效超過200小時後破裂模式從延性轉變成脆性,導致銲錫強度突然的下降,在固態時效反應下,強度下降歸究於部分的鎳層消耗,測量鎳層在150℃之消耗速率約為0.02μm/小時1/2。zh_TW
dc.description.abstractNickel has been widely used as an under-bump metallization (UBM) material in the microelectronics industry. The reflow times and solid-state reactions between the eutectic SnAg solder bumps and three thicknesses of Ni/Cu UBM was investigated, including 5μm-Cu/3μm-Ni, 3μm-Cu/2μm-Ni, and 0μm-Cu/1μm-Ni. It was found that the shear strength of the solder bumps decreased after the solid-state aging at 150□C for 200 hours, and it did not change much after prolonged for 500 hours and 1000 hours. Aging of the Ag3Sn intermetallic compound (IMC) and grain growth of the solder are responsible for the decrease in the shear strength. Furthermore, the shear test results indicated that the fracture mode switched from ductile to brittle for the solder bumps with 1 □m of Ni after aging longer than 200 hours, causing the strength of the solder to decrease abruptly. This is attributed to the partial consumption of the Ni layer after the solid-state aging. The Ni consumption rate was measured to be 0.02μm/hr1/2 at 150℃.en_US
dc.language.isozh_TWen_US
dc.subject電鍍zh_TW
dc.subject銲錫晶粒zh_TW
dc.subject剪力測試zh_TW
dc.subject金屬間化合物zh_TW
dc.subject晶粒成長zh_TW
dc.subject粗化現象zh_TW
dc.subjectelectroplatingen_US
dc.subjectsolder grainen_US
dc.subjectshear testen_US
dc.subjectIMCen_US
dc.subjectgrain growthen_US
dc.subjectRipening Phenomenonen_US
dc.titleSnAg銲錫和不同厚度的電鍍Ni/Cu UBM 之界面反應研究zh_TW
dc.titleMetallurgical Reactions of Sn-3.5Ag Solder with Various Thicknesses of Electroplated Ni/Cu Under Bump Metallizationen_US
dc.typeThesisen_US
dc.contributor.department材料科學與工程學系zh_TW
Appears in Collections:Thesis


Files in This Item:

  1. 852901.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.