TaN(x) thin films as copper barriers sputter-deposited at various NH(3)-to-Ar flow ratios

檔案

日期

2009-03-01

類型

期刊名稱

MICROELECTRONIC ENGINEERING

卷期與頁次

第 86 卷第 3 期,頁 414–420

ISSN

0167-9317

語言

英文

摘要

To optimize the performance of copper diffusion barriers, we deposited TaN(x) thin films through radio frequency (RF) sputtering at various flow ratios of the reactive gases NH(3) and Ar. The composition of the film changed from Ta(2)N to TaN, as evidenced from deposition rates and N-to-Ta ratios, when we increased the NH(3)-to-Ar flow ratio from 0.075 to 0.3. Furthermore, the structure of the TaN(x) thin film transformed from body-centered cubic (BCC) to face-centered cubic (FCC) to nanocrystalline upon increasing the NH(3)-to-Ar flow rate, as revealed by the three steps in the rate of formation of the TaN(x) films during the sputtering process. When incorporated in Cu/TaN(x)/n(+) np(+) diodes, the thermal stability of the TaN(x) thin film-measured in terms of the leakage current remaining below 3 mu A-increased from 450 to 550 degrees C upon increasing the NH(3)-to-Ar flow ratio from 0.075 to 0.3. It appears that the NH(3)-to-Ar flow ratio influences the properties of TaN(x) films predominantly through modification of the crystal structure. (C) 2008 Published by Elsevier B.V.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Chen, J. K., Chan, C.-H., Kuo, S.-W., & Chang, F.-C. (2009). TaN(x) thin films as copper barriers sputter-deposited at various NH(3)-to-Ar flow ratios. MICROELECTRONIC ENGINEERING, 86(3), 414–420. https://doi.org/10.1016/j.mee.2008.12.011

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/7515