Two-dimensional carrier profiling by Kelvin-probe force Microscopy
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
4453 | en_US |
dc.citation.issue |
6 | en_US |
dc.citation.spage |
4448 | en_US |
dc.citation.volume |
47 | en_US |
dc.citation.woscount |
5 | |
dc.contributor.author |
Tsui, Bing-Yue | en_US |
dc.contributor.author |
Hsieh, Chih-Ming | en_US |
dc.contributor.author |
Su, Po-Chih | en_US |
dc.contributor.author |
Tzeng, Shien-Der | en_US |
dc.contributor.author |
Gwo, Shangjr | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:11:25Z | |
dc.date.available |
2014-12-08T15:11:25Z | |
dc.date.issued |
2008-06-01 | en_US |
dc.description.abstract |
This paper reports the two-dimensional (2-D) carrier/dopant profiling technique by Kelvin-probe force microscopy (KFM). Before surface potential was measured, a feedback control circuit was used to improve signal response speed. The effect of surface treatment on the contrast in surface potential images was studied. Then the correlation between surface potential difference measured by KFM and surface carrier/dopant concentration obtained by spreading resistance profiling, the capacitance-voltage method, and secondary ion mass spectroscopy analysis was established. On the basis of these results, the carrier depth profiling of a p-n junction and the detection of a p-n junction array with small pitch have been successfully demonstrated. | en_US |
dc.identifier.doi |
10.1143/JJAP.47.4448 | en_US |
dc.identifier.issn |
0021-4922 | en_US |
dc.identifier.journal |
JAPANESE JOURNAL OF APPLIED PHYSICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1143/JJAP.47.4448 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/8758 | |
dc.identifier.wosnumber |
WOS:000257260600014 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Kelvin-probe force microscopy | en_US |
dc.subject |
scanning probe microscopy | en_US |
dc.subject |
surface potential | en_US |
dc.title |
Two-dimensional carrier profiling by Kelvin-probe force Microscopy | en_US |
dc.type |
Article | en_US |
檔案
- 000257260600014.pdf (451.1 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Tsui, B.-Y., Hsieh, C.-M., Su, P.-C., Tzeng, S.-D., & Gwo, S. (2008). Two-dimensional carrier profiling by Kelvin-probe force Microscopy. JAPANESE JOURNAL OF APPLIED PHYSICS, 47(6), 4448–4453. https://doi.org/10.1143/JJAP.47.4448
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/8758