In situ compatibility of polystyrene and liquid crystalline polymer blends

檔案

日期

1996-12-01

期刊名稱

POLYMER

摘要

The styrene-glycidyl methacrylate (SG) copolymer can be used to compatibilize the immiscible and incompatible blends between polystyrene (PS) and liquid crystalline polymer (LCP) copolyester. The epoxy functional groups present in the SG copolymer can react with the carboxylic and/or the hydroxyl terminal groups of the LCP at interface to form the SG-g-LCP copolymer during melt processing. This in situ-formed graft copolymer tends to reside along the interface to reduce the interfacial tension in the melt state and to increase the interphase adhesion in the solid state. However, the compatibilized PS/LCP blends reduce the number of LCP fibrils formed and have a tendency to form droplet LCP domains. The overall mechanical properties, stiffness and toughness of the blends improved after compatibilization, but the extent of the improvement is not very significant. It appears that the gain from the adhesion enhancement is more than offset by the loss due to the reduction in LCP fibril formation. The ethyl triphenylsphosponium bromide catalyst can further improve the compatibility of the blends by increasing the rate of the graft reaction. Copyright (C) 1996 Elsevier Science Ltd.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Chiou, Y., Chang, D., & Chang, F. (1996). In situ compatibility of polystyrene and liquid crystalline polymer blends. POLYMER, 37(25), 5653–5660. https://doi.org/10.1016/S0032-3861(96)00428-4

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/883