Chemical formation of palladium-free surface-nickelized polyimide film for flexible electronics
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
4266 | en_US |
dc.citation.issue |
12 | en_US |
dc.citation.spage |
4258 | en_US |
dc.citation.volume |
516 | en_US |
dc.citation.woscount |
20 | |
dc.contributor.author |
Hsiao, Yu-Sheng | en_US |
dc.contributor.author |
Whang, Wha-Tzong | en_US |
dc.contributor.author |
Wu, Sheng-Chang | en_US |
dc.contributor.author |
Chuang, Kuen-Ru | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:12:16Z | |
dc.date.available |
2014-12-08T15:12:16Z | |
dc.date.issued |
2008-04-30 | en_US |
dc.description.abstract |
Flexible polyimide (PI) films for flexible electronics were surface-nickelized using a fully solution-based process and excellent adhesion between the nickel and polyimide phases was observed. Polyimide substrates were modified by alkaline hydrolysis, ion exchange, reduction and nickel electroless deposition without palladium. Atomic force microscopy and field emission scanning electron microscopy were used to follow the growth of nickel nanoparticles (Ni-NPs) and nickel layers on the polyimide surface. The surface resistances of the Ni-NPs/PI films and Ni/PI films, measured using a four-point probe, were 1.6x10(7) and 0.83 Omega/cm(2), respectively. The thicknesses of Ni-NPs and the Ni layer on the polyimide surface were 82 nm and 382 nm, respectively, as determined by transmission electron microscopy, and the Ni layer adhered well to PI, as determined by the adhesive tape testing method. (c) 2008 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.tsf.2007.12.166 | en_US |
dc.identifier.issn |
0040-6090 | en_US |
dc.identifier.journal |
THIN SOLID FILMS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.tsf.2007.12.166 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/9436 | |
dc.identifier.wosnumber |
WOS:000255125900087 | |
dc.language.iso |
en_US | en_US |
dc.subject |
flexible electronics | en_US |
dc.subject |
polyimide | en_US |
dc.subject |
nickel electroless deposition | en_US |
dc.title |
Chemical formation of palladium-free surface-nickelized polyimide film for flexible electronics | en_US |
dc.type |
Article | en_US |
檔案
- 000255125900087.pdf (1.56 MB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Hsiao, Y.-S., Whang, W.-T., Wu, S.-C., & Chuang, K.-R. (2008). Chemical formation of palladium-free surface-nickelized polyimide film for flexible electronics. THIN SOLID FILMS, 516(12), 4258–4266. https://doi.org/10.1016/j.tsf.2007.12.166
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/9436