Chemical formation of palladium-free surface-nickelized polyimide film for flexible electronics

檔案

日期

2008-04-30

類型

期刊名稱

THIN SOLID FILMS

卷期與頁次

第 516 卷第 12 期,頁 4258–4266

ISSN

0040-6090

語言

英文

摘要

Flexible polyimide (PI) films for flexible electronics were surface-nickelized using a fully solution-based process and excellent adhesion between the nickel and polyimide phases was observed. Polyimide substrates were modified by alkaline hydrolysis, ion exchange, reduction and nickel electroless deposition without palladium. Atomic force microscopy and field emission scanning electron microscopy were used to follow the growth of nickel nanoparticles (Ni-NPs) and nickel layers on the polyimide surface. The surface resistances of the Ni-NPs/PI films and Ni/PI films, measured using a four-point probe, were 1.6x10(7) and 0.83 Omega/cm(2), respectively. The thicknesses of Ni-NPs and the Ni layer on the polyimide surface were 82 nm and 382 nm, respectively, as determined by transmission electron microscopy, and the Ni layer adhered well to PI, as determined by the adhesive tape testing method. (c) 2008 Elsevier B.V. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Hsiao, Y.-S., Whang, W.-T., Wu, S.-C., & Chuang, K.-R. (2008). Chemical formation of palladium-free surface-nickelized polyimide film for flexible electronics. THIN SOLID FILMS, 516(12), 4258–4266. https://doi.org/10.1016/j.tsf.2007.12.166

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/9436