Browsing by Author "Bitla, Yugandhar"

Now showing 1 - 12 of 12

A Fabrication and Measurement Method for a Flexible Ferroelectric Element Based on Van Der Waals Heteroepitaxy
(2018-04-01)
Jiang, Jie
;
Bitla, Yugandhar
;
Peng, Qiang-xiang
;
Zhou, Yi-Chun
;
Chu, Ying-Hao
Flexible non-volatile memories have received much attention as they are applicable for portable smart electronic device in the future, relying on high-density data storage and low-power consumption capabilities. However, the high-quality oxide based nonvolatile memory on flexible substrates is often constrained by the material characteristics and the inevitable high-temperature fabrication process. In this paper, a protocol is proposed to directly grow an epitaxial yet flexible lead zirconium titanate memory element on muscovite mica. The versatile deposition technique and measurement method enable the fabrication of flexible yet single-crystalline non-volatile memory elements necessary for the next generation of smart devices.
Deterministic, Reversible, and Nonvolatile Low-Voltage Writing of Magnetic Domains in Epitaxial BaTiO3/Fe3O4 Heterostructure
(2018-09-01)
Zhong, Gaokuo
;
An, Feng
;
Bitla, Yugandhar
;
Wang, Jinbin
;
Zhong, Xiangli
The ability to electrically write magnetic bits is highly desirable for future magnetic memories and spintronic devices, though fully deterministic, reversible, and nonvolatile switching of magnetic moments by electric field remains elusive despite extensive research. In this work, we develop a concept to electrically switch magnetization via polarization modulated oxygen vacancies, and we demonstrate the idea in a multiferroic epitaxial heterostructure of BaTiO3/Fe3O4 fabricated by pulsed laser deposition. The piezoelectricity and ferroelectricity of BaTiO3 have been confirmed by macro- and microscale measurements, for which Fe(3)O(4 )serves as the top electrode for switching the polarization. X-ray absorption spectroscopy and X-ray magnetic circular dichroism spectra indicate a mixture of Fe2+ and Fe3+ at O-h sites and Fe3+ at T-d sites in Fe3O4, while the room-temperature magnetic domains of Fe3O4 are revealed by microscopic magnetic force microscopy measurements. It is demonstrated that the magnetic domains of Fe(3)O(4 )can be switched by not only magnetic fields but also electric fields in a deterministic, reversible, and nonvolatile manner, wherein polarization reversal by electric field modulates the oxygen vacancy distribution in Fe3O4, and thus its magnetic state, making it attractive for electrically written magnetic memories.
Development of magnetoelectric nanocomposite for soft technology
(2018-06-13)
Bitla, Yugandhar
;
Chu, Ying-Hao
;
材料科學與工程學系
;
電子物理學系
;
國際半導體學院
The proliferation of flexible and stretchable electronics has led to substantial advancements in principles, material combinations and technologies. The integration of magnetoelectric systems in soft electronics is inevitable by virtue of their extensive applications. Recently, 2D layered materials have emerged as potential candidates due to their excellent flexibility and atomic-scale thickness scalability in addition to their interesting physics. This paper presents a new perspective on the development of magnetoelectric nanocomposites through materials engineering on a pliant mica with excellent mechanical, thermal and chemical stabilities. The unique features of 2D muscovite mica and the power of van der Waals epitaxy are expected to contribute significantly to the emerging transparent soft-technology research applications.
Enhanced Structural and Magnetic Coupling in a Mesocrystal-Assisted Nanocomposite
(2016-01-20)
Zhu, Yuanmin
;
Zhan, Qian
;
Yang, Jan-Chi
;
Bitla, Yugandhar
;
Liu, Pingping
Benefiting from the advances made in well-controlled materials synthesis techniques, nanocomposites have drawn considerable attention due to their enthralling physics and functionalities. In this work, we report a new heteroepitaxial mesocrystalperovskite nanocomposite, (NiFe2O4)(0.33):(La0.67Ca0.33MnO3)(0.67). Elaborate structural studies revealed that tiny NiFe2O4 nanocrystals aggregate into ordered octahedral mesocrystal arrays with {111} facets together with a concomitant structural phase transition of the La0.67Ca0.33MnO3 matrix upon postannealing process. Combined magnetic and X-ray absorption spectroscopic measurements show significant enhancement in the magnetic properties at room temperature due to the structural evolution of magnetic NiFe2O4 and the consequent magnetic coupling at the heterointerfaces mediating via well connected octahedrons of Mn-O-6 in La0.67Ca0.33MnO3 and (Ni,Fe)-O-6 in NiFe2O4. This work demonstrates an approach to manipulate the exciting physical properties of material systems by integrating desired functionalities of the constituents via synthesis of a self-assembled mesocrystal embedded nanocomposite system.
Enhancing the magnetic moment of ferrimagnetic NiCo2O4 via ion irradiation driven oxygen vacancies
(2018-06-01)
Pandey, Parul
;
Bitla, Yugandhar
;
Zschornak, Matthias
;
Wang, Mao
;
Xu, Chi
Ion irradiation has emerged as a powerful tool for the efficient control of uniaxial lattice expansion to fine tune and modulate the otherwise inaccessible complex correlated phases in oxide thin-films. We report the fine tuning of the magnetic moment, ferromagnetic-paramagnetic and metal-insulator transition temperatures in the NiCo2O4 inverse-spinel oxide by creating oxygen deficiencies, employing high energy He-ion irradiation. Tailoring of oxygen vacancies and consequently a uniaxial lattice expansion in the out-of-plane direction drives the system toward the increase of the magnetic moment by two-times in magnitude. The magnetic moment increases with the He-ion irradiation fluence up to 2.5 x 10(16)/cm(2) . Our results are corroborated well by spin-polarized electronic structure calculations with density functional theory and X-ray absorption spectroscopic data, which show peak-height change and energy shift of Co-L-2,L-3 and Ni-L-2,L-3 edges driven by the oxygen vacancies. These results demonstrate a new pathway of tailoring oxygen vacancies via He-ion irradiation, useful for designing new functionalities in other complex oxide thin-films. (C) 2018 Author(s).
Flexible ferroelectric element based on van der Waals heteroepitaxy
(2017-06-01)
Jiang, Jie
;
Bitla, Yugandhar
;
Huang, Chun-Wei
;
Thi Hien Do
;
Liu, Heng-Jui
We present a promising technology for nonvolatile flexible electronic devices: A direct fabrication of epitaxial lead zirconium titanate (PZT) on flexible mica substrate via van der Waals epitaxy. These single-crystalline flexible ferroelectric PZT films not only retain their performance, reliability, and thermal stability comparable to those on rigid counterparts in tests of nonvolatile memory elements but also exhibit remarkable mechanical properties with robust operation in bent states (bending radii down to 2.5 mm) and cycling tests (1000 times). This study marks the technological advancement toward realizing much-awaited flexible yet single-crystalline nonvolatile electronic devices for the design and development of flexible, lightweight, and next-generation smart devices with potential applications in electronics, robotics, automotive, health care, industrial, and military systems.
Flexible Multiferroic Bulk Heterojunction with Giant Magnetoelectric Coupling via van der Waals Epitaxy
(2017-06-01)
Amrillah, Tahta
;
Bitla, Yugandhar
;
Shin, Kwangwoo
;
Yang, Tiannan
;
Hsieh, Ying-Hui
Magnetoelectric nanocomposites have been a topic of intense research due to their profound potential in the applications of electronic devices based on spintronic technology. Nevertheless, in spite of significant progress made in the growth of high-quality nanocomposite thin films, the substrate damping effect still remains a major hurdle in realizing the ultimate magneto electric coupling. To overcome this obstacle, an alternative strategy of fabricating a self-assembled ferroelectric-ferrimagnetic bulk heterojunction on a flexible muscovite via van der Waals epitaxy is adopted. hi this study, we investigated the magnetoelectric coupling in a self-assembled BiFeO3 (BFO)-CoFe2O4 (CFO) bulk heterojunction epitaxially grown on a flexible muscovite substrate. The obtained heterojunction is composed of vertically aligned multiferroic BFO nanopillars embedded in a ferrimagnetic CFO matrix. Moreover, due to the weak interaction between the flexible substrate and bulk heterojunction, the interface is incoherent and, hence, the substrate damping effect is greatly reduced. The phase-field simulation model also complements our results. The magnetic and electrical characterizations highlight the improvement in magnetoelectric coupling of the BFO-CFO bulk heterojunction. A magnetoelectric coupling coefficient of 74 mV/cm.Oe of this bulk heterojunction is larger than the magnetoelectric coefficient reported earlier on flexible substrates. Therefore, this study delivers a viable route of fabricating a remarkable magnetoelectric heterojunction and yet flexible electronic devices that are robust against extreme conditions with optimized performance.
Origin of metallic behavior in NiCo2O4 ferrimagnet
(2015-10-15)
Bitla, Yugandhar
;
Chin, Yi-Ying
;
Lin, Jheng-Cyuan
;
Van, Chien Nguyen
;
Liu, Ruirui
Predicting and understanding the cation distribution in spinels has been one of the most interesting problems in materials science. The present work investigates the effect of cation redistribution on the structural, electrical, optical and magnetic properties of mixed-valent inverse spinel NiCo2O4(NCO) thin films. It is observed that the films grown at low temperatures (T < 400 degrees C) exhibit metallic behavior while that grown at higher temperatures (T > 400 degrees C) are insulators with lower ferrimagnetic-paramagnetic phase transition temperature. So far, n-type Fe3O4 has been used as a conducting layer for the spinel thin films based devices and the search for a p-type counterpart still remains elusive. The inherent coexistence and coupling of ferrimagnetic order and the metallic nature in p-type NCO makes it a promising candidate for spintronic devices. Detailed X-ray Absorption and X-ray Magnetic Circular Dichroism studies revealed a strong correlation between the mixed-valent cation distribution and the resulting ferrimagnetic-metallic/insulating behavior. Our study clearly demonstrates that it is the concentration of Ni3+ ions and the Ni3+-O-2-Ni2+ double exchange interaction that is crucial in dictating the metallic behavior in NCO ferrimagnet. The metal-insulator and the associated magnetic order-disorder transitions can be tuned by the degree of cation site disorder via growth conditions.
Oxide Heteroepitaxy for Flexible Optoelectronics
(2016-11-30)
Bitla, Yugandhar
;
Chen, Ching
;
Lee, Hsien-Chang
;
Do, Thi Hien
;
Ma, Chun-Hao
The emerging technological demands for flexible and transparent electronic devices have compelled researchers to look beyond the current silicon-based electronics. However, fabrication of devices on conventional flexible substrates with superior performance are constrained by the trade-off between processing temperature and device performance. Here, we propose an alternative strategy to circumvent this issue via the heteroepitaxial growth of transparent conducting oxides (TCO) on the flexible mica substrate with performance comparable to that of their rigid counterparts. With the examples of ITO and AZO as a case study, a strong emphasis is laid upon the growth of flexible yet epitaxial TCO relying muscovite\'s superior properties compared to those of conventional flexible substrates and its compatibility with the present fabrication methods. Besides excellent optoelectro-mechanical properties, an additional functionality of high-temperature stability, normally lacking in the current state-of-the-art transparent flexitronics, is provided by these heterostructures. These epitaxial TCO electrodes with good chemical and thermal stabilities as well as mechanical durability can significantly contribute to the field of flexible, light-weight, and portable smart electronics.
Self-Assembled BiFeO3-epsilon-Fe2O3 Vertical Heteroepitaxy for Visible Light Photoelectrochemistry
(2016-09-21)
Le Thi Quynh
;
Chien Nguyen Van
;
Bitla, Yugandhar
;
Chen, Jhih-Wei
;
Thi Hien Do
Self-assembled vertical heterostructure with a high interface-to-volume ratio offers tremendous opportunities to realize intriguing properties and advanced modulation of functionalities. Here, a heterostructure composed of two visible-light photocatalysts, BiFeO3 (BFO) and epsilon-Fe2O3 (epsilon-FO), is designed to investigate its photoelectrochemical performance. The structural characterization of the BFO-FO heterostructures confirms the phase separation with BFO nanopillars embedded in the epsilon-FO matrix. The investigation of band structure of the heterojunction suggests the assistance of photoexcited carrier separation, leading to an enhanced photoelectrochemical performance. The insights into the charge separation are further revealed by means of ultrafast dynamics and electrochemical impedance spectroscopies. This work shows a delicate design of the self-assembled vertical heteroepitaxy by taking advantage of the intimate contact between two phases that can lead to a tunable charge interaction, providing a new confi guration for the optimization of photoelectrochemical cell.
Tuning the magnetic properties of self-assembled BiFeO3-CoFe2O4 heteroepitaxy by magneto-structural coupling
(2016)
Amrillah, Tahta
;
Vandrangi, Suresh K.
;
Bitla, Yugandhar
;
Do, Thi Hien
;
Liao, Sheng-Chieh
Magnetic and multiferroic nanocomposites with two distinct phases have been a topic of intense research for their profound potential applications in the field of spintronics. In addition to growing high-quality phase separated heteroepitaxial nanocomposites, the strain engineering that is conducive to enhance the tunability of material properties, in general, and the magnetic properties, in particular, is of utmost importance in exploring new possibilities. Here, we investigated the magneto-structural coupling between anti-ferromagnetic BiFeO3 (BFO) and ferrimagnetic CoFe2O4 (CFO) in self-assembled vertically aligned nanocomposites grown on LaAlO3 (LAO) and SrTiO3 (STO) substrates. We found that BFO exhibits tetragonal (T) and rhombohedral (R) structures as the stable phases and CFO has high magnetocrystalline anisotropy even in the form of nanocomposites. The temperature and magnetic field dependent magnetizations of T_ BFO-CFO/LAO and R_ BFO-CFO/STO nanocomposites primarily demonstrate the magnetoelastic coupling between these variants.
van der Waals heteroepitaxy on muscovite
(2019-08-01)
Yen, Min
;
Bitla, Yugandhar
;
Chu, Ying-Hao
;
交大名義發表
;
材料科學與工程學系
As current electronics makes a transition from bulky and rigid templates to lightweight and flexible ones, the emerging field of soft technology is set to revolutionize our daily life. Currently, polymer based templates dominate this field due to their excellent mechanical characteristics and low cost, but limited thermal budget and stabilities are the major technological bottlenecks resulting in poor performance and short duration of lifetime. Recently, the technology based on van der Waals heteroepitaxy on muscovite is considered as a promising solution to overcome these barriers at once. In this paper, the characteristics of muscovite and the mechanism of van der Waals heteroepitaxy will be introduced, after that, a variety of materials on muscovite via van der Waals heteroepitaxy and the efforts on practical applications are reported. With the outlook of material science and help of advanced measurements, the evidence of heteroepitaxy of muscovite and overlayers has been deeply analyzed. Moreover, various measurements of properties was carried under bending conditions to demonstrate the mechanical stability and reliability. Through this review, we pave the path to develop more material systems on muscovite to make MICAtronics completely.