Browsing by Author "Chang, Feng-Yu"

Now showing 1 - 4 of 4

Characteristics of large-scale nanohole arrays for thin-silicon photovoltaics
(2014-04-01)
Chen, Ting-Gang
;
Yu, Peichen
;
Chen, Shih-Wei
;
Chang, Feng-Yu
;
Huang, Bo-Yu
Nanostructured crystalline silicon is promising for thin-silicon photovoltaic devices because of reduced material usage and wafer quality constraint. This paper presents the optical and photovoltaic characteristics of silicon nanohole (SiNH) arrays fabricated using polystyrene nanosphere lithography and reactive-ion etching (RIE) techniques for large-area processes. A post-RIE damage removal etching is subsequently introduced to mitigate the surface recombination issues and also suppress the surface reflection due to modifications in the nanohole sidewall profile, resulting in a 19% increase in the power conversion efficiency. We show that the damage removal etching treatment can effectively recover the carrier lifetime and dark current-voltage characteristics of SiNH solar cells to resemble the planar counterpart without RIE damages. Furthermore, the reflectance spectra exhibit broadband and omnidirectional anti-reflective properties, where an AM1.5 G spectrum-weighted reflectance achieves 4.7% for SiNH arrays. Finally, a three-dimensional optical modeling has also been established to investigate the dimension and wafer thickness dependence of light absorption. We conclude that the SiNH arrays reveal great potential for efficient light harvesting in thin-silicon photovoltaics with a 95% material reduction compared to a typical cell thickness of 200 mu m. Copyright (c) 2012 John Wiley & Sons, Ltd.
FABRICATION AND MODELING OF LARGE-SCALE SILICON NANOWIRE SOLAR CELLS FOR THIN-FILM PHOTOVOLTAICS
(2012)
Cheng, Yu-Chih
;
Chen, Ting-Gang
;
Chang, Feng-Yu
;
Huang, Bo-Yu
;
Pan, Huai-Te
Nanostructured crystalline silicon is promising for thin photovoltaic devices due to reduced material usage and wafer quality constraint. In this study, a simple and cost-effective method is presented for producing large-area silicon nanowire (SiNW) arrays with various lengths by employing the polystyrene nanosphere lithography and the metal-assisted chemical etching (MACE). The nanowire structure exhibits broadband and omnidirectional antireflection properties, where the lowest AM1.5G-spectrum-weighted reflectance of SiNW arrays is 4.38%, compared to 8.84% of the conventional single layer antireflection coating (SLARC). Next, we made SiNW array structures into solar cells and its power efficiency achieved 10.8%. Afterward, the SiNW array solar cells were analyzed by external and internal quantum efficiency measurement which shows the device performance primarily limited by direct and indirect interfacial recombination of charge carriers. We further develop a modeling technique based on three-dimensional (3) optical and two-dimensional (20) electrical simulations which are tailored for the nanostructured silicon photovoltaic devices. The optical simulation employs a rigorous couple wave analysis (RCWA) technique to calculate the distribution of electromagnetic field in order to obtain the generation rate within the nanostructure. Next, an electrical calculation is based on a 20 self-consistent drift-diffusion and Poisson solver using a finite element method (FEM). We investigate the influence to the device performance of carrier diffusion length with three different structures. The simulation results show that a short diffusion length does not seriously deteriorate the short-circuit current density and power conversion efficiency of a core-shell PN junction solar cell compared to the conventional planar structure. Our work suggests that SiNW solar cells can achieve efficient light harvesting and photoelectric conversion with less and lower-grade materials than the conventional technology, which is promising for thin silicon photovoltaics.
High Efficiency Triple-Junction Solar Cells Employing Biomimetic Antireflective Structures
(2011)
Chiu, Meng-Yih
;
Chang, Chia-Hua
;
Chang, Feng-Yu
;
Yu, Peichen
;
光電工程學系
In this work, we demonstrate a thorough device design, fabrication, characterization, and analysis of biomimetic antireflective structures implemented on a Ga(0.5)In(0.5)P/GaAs/Ge triple-junction solar cell. The sub-wavelength structures are fabricated on a silicon nitride passivation layer using polystyrene nanosphere lithography followed by anisotropic etching. The fabricated structures enhance optical transmission in the ultraviolet wavelength range, compared to a conventional single-layer antireflective coating (ARC). The transmission improvement contributes to the enhanced photocurrent, which is also verified by the external quantum efficiency characterization of fabricated solar cells. Under one-sun illumination, the short-circuit current of a cell with a biomimetic structures is enhanced by 24.1% and 2.2% due to much improved optical transmission and current matching, compared to cells without an ARC and with a conventional ARC, respectively. Further optimizations of the biomimetic structures including the periodicity and etching depth are conducted by performing comprehensive calculations based on a rigorous couple-wave analysis method.
Optical coherence tomography-guided laser microsurgery for blood coagulation with continuous-wave laser diode
(2015-11-16)
Chang, Feng-Yu
;
Tsai, Meng-Tsan
;
Wang, Zu-Yi
;
Chi, Chun-Kai
;
Lee, Cheng-Kuang
Blood coagulation is the clotting and subsequent dissolution of the clot following repair to the damaged tissue. However, inducing blood coagulation is difficult for some patients with homeostasis dysfunction or during surgery. In this study, we proposed a method to develop an integrated system that combines optical coherence tomography (OCT) and laser microsurgery for blood coagulation. Also, an algorithm for positioning of the treatment location from OCT images was developed. With OCT scanning, 2D/3D OCT images and angiography of tissue can be obtained simultaneously, enabling to noninvasively reconstruct the morphological and microvascular structures for real-time monitoring of changes in biological tissues during laser microsurgery. Instead of high-cost pulsed lasers, continuous-wave laser diodes (CW-LDs) with the central wavelengths of 450 nm and 532 nm are used for blood coagulation, corresponding to higher absorption coefficients of oxyhemoglobin and deoxyhemoglobin. Experimental results showed that the location of laser exposure can be accurately controlled with the proposed approach of imaging-based feedback positioning. Moreover, blood coagulation can be efficiently induced by CW-LDs and the coagulation process can be monitored in real-time with OCT. This technology enables to potentially provide accurate positioning for laser microsurgery and control the laser exposure to avoid extra damage by real-time OCT imaging.