Browsing by Author "Chang, Huan-Hsuan"

Now showing 1 - 4 of 4

A New Pentacyclic Indacenodiselenophene Arene and Its Donor-Acceptor Copolymers for Solution-Processable Polymer Solar Cells and Transistors: Synthesis, Characterization, and Investigation of Alkyl/Alkoxy Side-Chain Effect
(2013-10-08)
Chang, Huan-Hsuan
;
Tsai, Che-En
;
Lai, Yu-Ying
;
Liang, Wei-Wei
;
Hsu, So-Lin
A pentacyclic indacenodiselenophene (IDS) arene was synthesized via intramolecular Friedel-Craft cyclization of the selenophene moieties. This IDS framework was used as a model system to investigate the alkyl/alkoxy side-chain effect by preparing IDS-OCH8 and IDS-C-6, where the side chains on the sp(3) carbon in the cyclopentadienyl ring are 4-octyloxyphenyl groups and 4-hexylphenyl groups, respectively. The SnIDS-OCH8 and Sn-IDS-C-6 monomers were copolymerized with 4,7dibromo-2,1,3-benzothiadiazole (BT), 4,7-diiodo-5,6-difluoro-2,1,3-benzothiadiazole (FBT) and 1,3-dibromothieno[3,4-dpyrrole-4,6-dione (TPD) acceptor monomers by Stil le polycondensation to afford five new IDS-based donor acceptor alternating copolymers, PIDSBT-OCH8, PIDSBTC6) PIDSFBT-OCH8, PIDSFBT-C-6, and PIDSTPD-C-6. Despite the fact that the octyloxy and hexyl side chains play a negligible role in the optical and electrochemical properties of the resulting polymers, the solar cell performance is highly associated with the side chains of the polymers. Under similar device fabrication conditions, the PIDSBT-C-6 and PIDSFBT-C-6-based devices showed much improved efficiencies than the corresponding PIDSBT-OCH8, and PIDSFBT-OCH8-based devices (2.6% and 1.9% vs 3.8% and 3.9%). The improvement is mainly the result of much enhanced J(sc) values. Consistently, PIDSBT-C-6 and PIDSFBT-C-6 exhibited much higher FET hole mobilites than the corresponding PIDSBT-OCH8, and PIDSFBT-OCH8. These results clearly revealed that the 4-hexylphenyl group is a more suitable side chain than the 4-octyloxyphenyl group in the IDS system, and the side-chain dependent mobility of the polymers is the dominating factor to determine the photocurrents and efficiencies of PSCs. PIDSBT-C-6 exhibited a high hole mobility of 0.08 cm(2) V-1 s(-1) and PIDSTPD-C-6:PC71BM (1:4 in wt %)-based solar cell with 5 v% chloronaphthalene (CN) delivered a V-oc of 0.92 V, a J(sc) of 9.77 mA/cm(2), an FF of 51%, and a highest PCE of 4.6%. This work not only discloses a new selenophene-containing ladder-type IDS structure and its copolymers but also provides useful insights into the allcyl/alkoxy side-chain effect for future design of conjugated polymers.
Angular-Shaped 4,10-Dialkylanthradiselenophene and Its Donor-Acceptor Conjugated Polymers: Synthesis, Physical, Transistor, and Photovoltaic Properties
(2015-10-13)
Lai, Yu-Ying
;
Chang, Huan-Hsuan
;
Lai, Yun-Yu
;
Liang, Wei-Wei
;
Tsai, Che-En
An angular-shaped and isomerically pure 4,10-di(2-octyl)dodecylanthradiselenophene (aADS) was successfully developed. The expedient synthesis to form the framework of aADS with two lateral side chains regioseleclively at its 4,10-positions is via a base-induced propargyl-allenyl isomerization/6 pi-electrocyclization/aromatization protocol. This pentacyclic distannylated aADS unit was then copolymerized with dithienyldiketopyrrolopyrrole (DPP) and dithienyl-5,6-difluoro-2,1,3-benzothiadiazole (DTFBT) acceptors with different alkyl side chains to afford four donor-acceptor copolymers: PaADSDPP, PaADSDTFBT-C-4, PaADSDTFBT-C-8, and PaADSDTFBT-C8C12. UV-vis spectroscopy and cyclic voltammetry revealed that PaADSDPP has the narrowest energy band gap, and PaADSDTFBT-C8C12 has larger band gap than PaADSDTFBT-C-4 and PaADSDTFBT-C-8. Two layer ONIOM (our own n-layered integrated molecular orbital and molecular mechanics) calculations were implemented to investigate the disparity in optical, electrochemical, and device properties between these polymers. Both experimental and theoretical data suggest that the aliphatic side chains play a significant role in determining the physical, transistor, and photovoltaic properties of the polymers. PaADSDTFBT-C-4 and PaADSDTFBT-C-8 exhibited organic-field-effect-transistor hole mobilities of 2.7 x 10(-2) and 1.0 x 10(-2) cm(2) V-1 s(-1), greatly outperforming that of PaADSDTFBT-C8C12 with a mobility of 5.4 X 10(-6) cm(2) V-1 s(-1). Polymer solar cells were fabricated on the basis of ITO/PEDOT:PSS/polymer:PC71BM/Ca/Al configuration. The efficiency decreased as the increase of bulkiness of the aliphatic side chains installed on DTFBT units (4.4% for PaADSDTFBT-C-4, 3.5% for PaADSDTFBT-C-8, 0.3% for PaADSDTFBT-C8C12). Atomic force microscopy images reveal that the degree of aggregation for the polymer:fullerene blends is influenced significantly by the bulkiness of aliphatic side chain installed on DTFBT. Noticeable aggregation was found for the PaADSDTFBT-C8C12:PC71BM blend. These results are in good agreement with the computational results elucidating that the intermolecular interactions between the polymers and PC71BM are sterically hindered by the bulky 2-octyldodecyl groups. This work not only presents a promising selenophene-based aADS building block but also provides insights into the side-chain engineering for donor-acceptor conjugated copolymers.
Formation of Nanostructured Fullerene Interlayer through Accelerated Self-Assembly and Cross-Linking of Trichlorosilane Moieties Leading to Enhanced Efficiency of Photovoltaic Cells
(2013-06-25)
Liang, Wei-Wei
;
Chang, Chih-Yu
;
Lai, Yu-Ying
;
Cheng, Sheng-Wen
;
Chang, Huan-Hsuan
A new cross-linkable fullerene material, bis(2-(trichlorosilyl)propyl)-malonate C-60 (TSMC), functionalized with two trichlorosilane groups, was easily synthesized by Pt-catalyzed olefin hydrosilylation. By making use of facile hydrolysis of the trichlorosilyl moieties, TSMC can be spontaneously self-assembled and cross-linked on the TiOx surface by a simple spin-coating processing without the aid of photoirradiation or post-thermal treatments. The rapid formation of self-assembled and crosslinked TSMC (SA-C-TSMC) effectively passivates the residual hydroxyl groups on the TiOx surface. More significantly, the solvent-resistant TSMC network features a nanostructured surface to provide extra charge-generating interfacial area and straight electron transport pathways. The device (ITO/TiOx/SA-C-TSMC/P3HT:PC61BM (1:1, w/w)/PEDOT:PSS/Ag) with this C-60 interlayer exhibited an efficiency of 3.9% which greatly outperformed the device without this layer. Furthermore, the strategy can also be effectively applied to the device (ITO/TiOx/PDITTDTBT:PC71BM(1:4, w/w)/MoOx/Ag) incorporating a conjugated polymer, poly(diindenothiophene-alt-dithienylbenzothiadizole) copolymer (PDITTDTBT). This device delivered a high efficiency of 5.8% which represents a 35% enhancement over the device without SA-C-TSMC. This new generation of trichlorosilane-based fullerene offers an easy and accelerated processing technique to produce efficient and cost-effective inverted solar cells.
Synthesis, Molecular and Photovoltaic Properties of Donor-Acceptor Conjugated Polymers Incorporating a New Heptacylic Indacenodithieno[3,2-b]thiophene Arene
(2012-12-11)
Chang, Huan-Hsuan
;
Tsai, Che-En
;
Lai, Yu-Ying
;
Chiou, De-Yang
;
Hsu, So-Lin
We have developed a new multifused indacenodithieno[3,2-b]thiophene arene (IDTT) unit where the central phenylene is covalently fastened with the two outer thieno[3,2-b]thiophene (TT) rings, forming two cyclopentadiene rings embedded in a heptacyclic structure. This rigid and coplanar IDTT building block was copolymerized with electron-deficient acceptors, 4,7-dibromo-2,1,3-benzothiadiazole (BT), 4,7-dibromo-5,6-difluoro-2,1,3-benzothiadiazole (FBT) and 1,3-dibromo-thieno[3,4-c]pyrrole-4,6-dione (TPD) via Stifle polymerization, respectively. Because the higher content of the thienothiophene moieties in the fully coplanar IDTT structure facilitates pi-electron delocalization, these new polymers show much improved light-harvesting abilities and enhanced charge mobilities compared to PDITTBT copolymer using hexacyclic diindenothieno[3,2-b]thiophene (DITT) as the donor moieties. The device using PIDTTBT:PC71BM (1:4, w/w) exhibited a decent power conversion efficiency (PCE) of 3.8%. Meanwhile, the solar cell using PIDTTFBT:PC71BM (1:4 in wt %) blend exhibited a greater V-oc value of 0.9 V and a larger J(sc) of 10.08 mA/cm(2), improving the PCE to 4.2%. The enhanced V-oc is attributed to the lower-lying of HOMO energy level of PIDTTFBT as a result of fluorine withdrawing effect on the BT unit. A highest PCE of 4.3% was achieved for the device incorporating PIDTTTPD:PC71BM (1:4 in wt %) blend.