Browsing by Author "Chen, Chang-Hung"

Now showing 1 - 3 of 3

Broadband Omnidirectional Light Trapping in Gold-Decorated ZnO Nanopillar Arrays
(2017-04-05)
Chang, Yuan-Ming
;
Lin, Man-Ling
;
Lai, Tung-Yen
;
Chen, Chang-Hung
;
Lee, Hsin-Yi
The photoluminescence (PL) and reflectivity characteristics of zinc oxide nanopillars- (ZnO-NPs) grown on indium tin oxide (ITO)-coated glasses were investigated. The room temperature PL showed bright -white -light emission for the undoped ZnO-NPs grown at 600 degrees C, suggesting the close relation between the optical characteristic and "the growth conditions being, carried out for,obtaining the present ZnO-NPs. The reflectivity of the as -grown ZnO-NPs array was about, similar to 29% with the wavelength of the incident light ranging from 200 to 1800 nm. Nevertheless, the reflectance reduced significantly to less than 9.9% when a layer of gold (Au) was deposited on ZnO=NPg by sputtering for 5 min, corresponding to more than 65% reduction in Au -coated ZnQ-NPs (Au/ZnO-NPs). Moreover, the angle -resolved reflectance measurement's on the present Au/ZnO-NPs array show an omnidirectional light -trapping characteristic. These remarkable characteristics, broadband and omnidirectional light -trapping -of Ati/ZnO-NPs, are attributed to the extended effective optical path of the incident light due to subwavelength scattering resulting,from the presence of Au nanoparticics.
Negative-Differential-Resistance Devices Achieved by Band-Structure Engineering in Silicene under Periodic Potentials
(2018-10-18)
Chen, Chang-Hung
;
Li, Wen-Wu
;
Chang, Yuan-Ming
;
Lin, Che-Yi
;
Yang, Shih-Hsien
An important development in modern electronics is the realization of band-structure engineering for the design of novel materials and devices. One possible way to realize band-structure engineering is by addition of periodic potentials to two-dimensional (2D) materials, such as graphene, to form a superstructure, known as a "superlattice.' Unlike the band gap of graphene, the band gap of silicene can be tuned by an out-of-plane electric field owing to its unusual buckled structure. In this work, we use the designable band gap of silicene and the band structure of superlattices, together with the spin and valley degrees of freedom, to propose a design principle for optimizing the performance of spin-and valley-dependent negative-differential-resistance (NDR) devices using silicene superlattices. On the basis of the effective Hamiltonian formalism, we predict that the peak-to-valley current ratio could be larger than most recently reported results achieved by 2D materials, suggesting that the silicene superlattice is a good candidate for realizing NDR devices. The design principle proposed in this work could also be extended to other layered materials with tunable band gaps. This could pave the way for advanced material and device designs based on band-gap engineering of 2D materials.
Reversible and Precisely Controllable p/n-Type Doping of MoTe2 Transistors through Electrothermal Doping
(2018-03-27)
Chang, Yuan-Ming
;
Yang, Shih-Hsien
;
Lin, Che-Yi
;
Chen, Chang-Hung
;
Lien, Chen-Hsin
Precisely controllable and reversible p/n-type electronic doping of molybdenum ditelluride (MoTe2) transistors is achieved by electrothermal doping (E-doping) processes. E-doping includes electrothermal annealing induced by an electric field in a vacuum chamber, which results in electron (n-type) doping and exposure to air, which induces hole (p-type) doping. The doping arises from the interaction between oxygen molecules or water vapor and defects of tellurium at the MoTe2 surface, and allows the accurate manipulation of p/n-type electrical doping of MoTe2 transistors. Because no dopant or special gas is used in the E-doping processes of MoTe2, E-doping is a simple and efficient method. Moreover, through exact manipulation of p/n-type doping of MoTe2 transistors, quasi-complementary metal oxide semiconductor adaptive logic circuits, such as an inverter, not or gate, and not and gate, are successfully fabricated. The simple method, E-doping, adopted in obtaining p/n-type doping of MoTe2 transistors undoubtedly has provided an approach to create the electronic devices with desired performance.