Browsing by Author "Chen, Min-Chen"

Now showing 1 - 20 of 68

A characteristic improved technique and analysis with plasma treatment to the electrode on oxide-based resistive random access memory
(2020-03-15)
Lin, Chih-Yang
;
Chang, Ting-Chang
;
Pan, Chih-Hung
;
Chen, Min-Chen
;
Xu, You-Lin
A technique was proposed to concentrate the distribution of set voltages. After a plasma treatment, the stability of the high-resistive state (HRS) increased, and the distribution of set voltages was more concentrated at 0.8 V, with a sufficient HRS/LRS resistive ratio (similar to 100x). In addition, the surface of the TiN electrode became rougher, causing oxygen to enter the TiN electrode and form a TiON layer, which acts as an oxygen reservoir. The reservoir is confirmed and the conduction model is supported by both electrical and material analyses. We propose that the observed improvement is due to the difference in the TiN electrode surface. (C) 2019 Published by Elsevier B.V.
A low-temperature method for improving the performance of sputter-deposited ZnO thin-film transistors with supercritical fluid
(2009-04-20)
Chen, Min-Chen
;
Chang, Ting-Chang
;
Huang, Sheng-Yao
;
Chang, Kuan-Chang
;
Li, Hung-Wei
A low-temperature method, supercritical CO(2) (SCCO(2)) fluid technology, is employed to improve the device properties of ZnO TFT at 150 degrees C. In this work, the undoped ZnO films were deposited by sputter at room temperature and treated by SCCO(2) fluid which is mixed with 5 ml pure H(2)O. After SCCO(2) treatment, the on/off current ratios and threshold voltage of the device were improved significantly. From x-ray photoelectron spectroscopy analyses, the enhancements were attributed to the stronger Zn-O bonds, the hydrogen-related donors, and the reduction in dangling bonds at the grain boundary by OH passivation.
A Universal Model for Interface-type Threshold Switching Phenomena by Comprehensive Study of Vanadium Oxide-Based Selector
(2017-01-01)
Lin, Chih-Yang
;
Chen, Ying-Chen
;
Gu, Meiqi
;
Pan, Chih-Hung
;
Jin, Fu-Yuan
For the first time, a comprehensive study of Vanadium oxide-based selector characteristics with a universal model observed by thermal and electrical induced threshold switching (TS) phenomena at interface is presented in this work. The model can explain that the resistance evolution by thermal temperature in TS behaviors, as well as the resistance gradually increases with cycling ("seasoning effect"). Compatible current density (10(7)similar to 10(9) A/cm(2)) and selectivity (similar to 100) with physical understanding of evolution in energy barrier and MIT metallic state modulation are studied. The results show a promising design guideline for future storage-class memory (SCM) applications.
Adjustable built-in resistor on oxygen-vacancy-rich electrode-capped resistance random access memory
(2016-10)
Pan, Chih-Hung
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
;
Chu, Tian-Jian
In this study, an adjustable built-in resistor was observed on an indium-tin oxide (ITO)-capped resistance random access memory (RRAM) device, which has the potential to reduce operating power. Quite notably, the high-resistance state (HRS) current of the device decreased with decreasing current compliance, and a special situation, that is, a gradual change in current always appears and climbs slowly to reach the compliance current in the set process even when the compliance current decreases, was observed. Owing to this observed phenomenon, the device is regarded to be equipped with an adjustable built-in resistor, which has the potential for low-power device application. (C) 2016 The Japan Society of Applied Physics
An Electronic Synapse Device Based on Solid Electrolyte Resistive Random Access Memory
(2015-08-01)
Zhang, Wei
;
Hu, Ying
;
Chang, Ting-Chang
;
Chang, Kuan-Chang
;
Tsai, Tsung-Ming
The multilevel capability of solid electrolyte resistive random access memory (RRAM) with a Pt/GeSO/TiN structure was explored for potential use as a synapse device. By varying the cutoff voltage during the dc I-V cycles or the ac pulse programming voltage amplitudes, continuous multilevel conductance states were obtained. The reference Pt/GeO/TiN RRAM was fabricated to certify the multilevel capability and was due to the character of the GeS solid electrolyte. Finally, the property of gradual conductance states was exploited to demonstrate spike-timing-dependent plasticity learning, which suggests device\'s potential for use as an electronic synapse device for neuromorphic systems.
Attaining resistive switching characteristics and selector properties by varying forming polarities in a single HfO2-based RRAM device with a vanadium electrode
(2017-07-07)
Lin, Chih-Yang
;
Chen, Po-Hsun
;
Chang, Ting-Chang
;
Chang, Kuan-Chang
;
Zhang, Sheng-Dong
This study proposes a method for a HfO2-based device to exhibit both resistive switching (RS) characteristics as resistive random access memory (RRAM) and selector characteristics by introducing vanadium (V) as the top electrode. This simple V/HfO2/TiN structure can demonstrate these two different properties depending on forming polarities. The RS mechanism is activated by a positive forming bias. In contrast, the selector property is induced by a negative forming bias. The material analyses firstly confirm the existence of V in the top electrode. Then the electrical measurements for the same V/HfO2/TiN structures but with different forming polarities were carried out to further investigate their DC sweeping characteristics to act as either a selector or RRAM device. Furthermore, reliability tests for both selector and RRAM devices were also conducted to confirm their switching stabilities. Finally, current fitting methods and temperature influence experiments were performed to investigate the carrier transport mechanisms. Finally, physical models were proposed to illustrate the selector property and RS mechanism for selector and RRAM devices, respectively. This simple device structure with its easy operating method accomplishes a significant advancement of devices combining both selector properties and RRAM for remarkable real applications in the near future.
Bipolar Resistive RAM Characteristics Induced by Nickel Incorporated Into Silicon Oxide Dielectrics for IC Applications
(2012-12-01)
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Syu, Yong-En
;
Chuang, Siang-Lan
In this letter, we successfully produced resistive switching behaviors by nickel doped into silicon oxide at room temperature. The nickel element was doped into silicon oxide, which is a useful dielectric material in integrated circuit (IC) industries by cosputtering technology. Based on the proposed method, satisfactory reliability of the resistance switching device can be demonstrated by endurance and retention evaluation. We believe that the silicon oxide doped with nickel at room temperature is a promising method for resistive random access memory nonvolatile memory applications due to its compatibility with the IC processes.
Bipolar Resistive Switching Characteristics of Transparent Indium Gallium Zinc Oxide Resistive Random Access Memory
(2010)
Chen, Min-Chen
;
Chang, Ting-Chang
;
Huang, Sheng-Yao
;
Chen, Shih-Ching
;
Hu, Chih-Wei
This study investigates a sputtered InGaZnO (IGZO) thin film to apply into a resistive random access memory device. After the formation of an indium tin oxide (ITO)/IGZO/ITO structure at room temperature, the device exhibits a repeatable bipolar resistance switching behavior without an electroforming process and an excellent transmittance in the visible region. The conduction mechanisms for low and high resistance states are dominated by Ohm's law and space-charge-limited current behavior, respectively. In retention and endurance tests, a resistance ratio of more than 1 order remains after 10(4) s at 90 degrees C and after 100 dc voltage sweeping cycles. (C) 2010 The Electrochemical Society. [DOI: 10.1149/1.3360181] All rights reserved.
Characteristics and Mechanisms of Silicon-Oxide-Based Resistance Random Access Memory
(2013-03-01)
Chang, Kuan-Chang
;
Tsai, Tsung-Ming
;
Chang, Ting-Chang
;
Wu, Hsing-Hua
;
Chen, Jung-Hui
Traditionally, a large number of silicon oxide materials are extensively used as various dielectrics for semiconductor industries. In general, silicon oxide cannot be used as resistance random access memory (RRAM) due to its insulating electrical properties. In this letter, we have successfully produced resistive switching and forming-free behaviors by zinc doped into silicon oxide. The current-voltage fitting data show that current transport mechanism is governed by Poole-Frenkel behavior in high-resistance state and Ohm's law in low-resistance state, consisting with filament theory. Additionally, good endurance and retention reliabilities are exhibited in the zinc-doped silicon oxide RRAM.
Characteristics of hafnium oxide resistance random access memory with different setting compliance current
(2013-10-14)
Su, Yu-Ting
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Zhang, Rui
In this Letter, the characteristics of set process of hafnium oxide based resistance random access memory are investigated by different set processes with increasing compliance current. Through current fitting, carrier conduction mechanism of low resistance state changes from hopping to surface scattering and finally to ohmic conduction with the increase of setting compliance current. Experimental data of current-voltage measurement under successive increasing temperature confirms the conduction mechanism transition. A model of filament growth is eventually proposed in a way by merging discrete metal precipitates and electrical field simulation by COMSOL Multiphysics further clarifies the properties of filament growth process. (C) 2013 AIP Publishing LLC.
Characterization of Oxygen Accumulation in Indium-Tin-Oxide for Resistance Random Access Memory
(2014-06-01)
Zhang, Rui
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Huang, Syuan-Yong
In this letter, we report the oxygen accumulation effect and its influence on resistive switching for gadolinium-doped silicon dioxide (Gd:SiO2) resistance random access memory (RRAM). We find that oxygen absorbance by indium-tin-oxide electrode affects the conduction current mechanism, and remarkably modifies the device performance of RRAM devices. By current fitting, Schottky emission can be observed in both low and high resistance states, from which conduction model is proposed to clarify the oxygen accumulation phenomenon. Reliability tests, including endurance and high temperature retention are further carried out, evaluating the significance of oxygen accumulation effect in redox reaction for RRAM devices.
Charge Quantity Influence on Resistance Switching Characteristic During Forming Process
(2013-04-01)
Chu, Tian-Jian
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Wu, Hsing-Hua
;
Chen, Jung-Hui
In this letter, we presented that the charge quantity is the critical factor for forming process. Forming is a pivotal process in resistance random access memory to activate the resistance switching behavior. However, overforming would lead to device damage. In general, the overshoot current has been considered as a degradation reason during the forming process. In this letter, the quantity of charge through the switching layer has been proven as the key element in the formation of the conduction path. Ultrafast pulse forming can form a discontinuous conduction path to reduce the operation power.
Cobalt nanodots formed by annealing the CoSiO layer for the application of the nonvolatile memory
(2009-03-09)
Hu, Chih-Wei
;
Chang, Ting-Chang
;
Tu, Chun-Hao
;
Shueh, Pei-Kun
;
Lin, Chao-Cheng
Co nanodot memory devices formed by oxidation processes were studied. Transmission electron microscopy and x-ray photoelectron spectroscopy analyses showed that overoxidation of the cobalt and silicon degraded the charge-storage ability seriously. However, a precapped oxide can mildly oxidize the CoSi(2) film to protect the overoxidation to occur. In addition, an oxygen-incorporated CoSi(2) film is proposed to improve the oxidation process further. Through incorporating the limited oxygen during sputtering process, the Co nanodot memory device obtains a larger memory window. Also, the reliability characteristic of the Co nanodot memory device formed by annealing the oxygen-incorporated CoSi(2) film has been demonstrated.
Confirmation of filament dissolution behavior by analyzing electrical field effect during reset process in oxide-based RRAM
(2016-09-26)
Pan, Chih-Hung
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
;
Chu, Tian-Jian
In this letter, we demonstrate completely different characteristics with different operating modes and analyze the electrical field effect to confirm the filament dissolution behavior. The device exhibited a larger memory window when using a single voltage sweep method during reset process rather than the traditional double sweep method. The phenomenon was verified by using fast I-V measurement to simulate the two operating methods. A better high resistance state (HRS) will be obtained with a very short rising time pulse, but quite notably, lower power consumption was needed. We proposed the electrical field effect to explain the phenomenon and demonstrate distribution by COMSOL simulation. Published by AIP Publishing.
Effect of Electrode Material on Resistive Switching Characteristics in TaON Nonvolatile Memory Devices
(2013-01-01)
Chen, Min-Chen
;
Chang, Ting-Chang
;
Chiu, Yi-Chieh
;
Chen, Shih-Cheng
;
Huang, Sheng-Yao
The devices composed of Pt/TaON/TiN reveal bipolar switching behavior that shows excellent resistance ratio of 10(2) with operations over 100 DC cycles. The formation/disruption of conducting filaments by oxygen anions migration near/at the TiN electrode was applied to explain the switching behavior. In comparison with Pt/TaON/TiN device, the Cu/TaON/TiN device exhibits reversed bipolar resistive switching characteristic. The switching mechanism of Cu/TaON/TiN device is regarded as the Cu redox reaction and migration in the TaON film. Furthermore, the setting voltage of the Cu/TaON/TiN device is lower than that of the Pt/TaON/TiN device due to the confined conduction path by Cu filaments.
Effects of erbium doping of indium tin oxide electrode in resistive random access memory
(2016-03)
Chen, Po-Hsun
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Pan, Chih-Hung
Identical insulators and bottom electrodes were fabricated and capped by an indium tin oxide (ITO) film, either undoped or doped with erbium (Er), as a top electrode. This distinctive top electrode dramatically altered the resistive random access memory (RRAM) characteristics, for example, lowering the operation current and enlarging the memory window. In addition, the RESET voltage increased, whereas the SET voltage remained almost the same. A conduction model of Er-doped ITO is proposed through current-voltage (I-V) measurement and current fitting to explain the resistance switching mechanism of Er-doped ITO RRAM and is confirmed by material analysis and reliability tests. (C) 2016 The Japan Society of Applied Physics
Electrical conduction mechanism of Zn:SiOx resistance random access memory with supercritical CO2 fluid process
(2013-08-19)
Chang, Kuan-Chang
;
Tsai, Tsung-Ming
;
Zhang, Rui
;
Chang, Ting-Chang
;
Chen, Kai-Huang
In this study, the electrical conduction mechanism of Zn:SiOx resistance random access memory (RRAM) treated with supercritical CO2 fluid (SCCO2) process was investigated by low temperature measurement. The current of low resistance state for current-voltage curves in SCCO2-treated and untreated Zn:SiOx RRAM were measured and compared under a low temperature range from 100K to 298 K. The electrical conduction mechanisms of hopping conduction and metal-like behaviors in SCCO2-treated and untreated Zn:SiOx RRAM were discussed, respectively. Finally, the electrical conduction mechanism was analyzed and verified by the chemical composition and bonding intensity of XPS analyses. (C) 2013 AIP Publishing LLC.
Endurance Improvement Technology With Nitrogen Implanted in the Interface of WSiOx Resistance Switching Device
(2013-07-01)
Syu, Yong-En
;
Zhang, Rui
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
Incorporation of nitrogen as an oxygen-confining layer in the resistance switching reaction region is investigated to improve the reliability of resistance random access memory (RRAM). The switching mechanism can be attributed to the formation and rupture of conduction filaments. A compatible WSiON (around 5 nm) layer is introduced at the interface of tungsten silicon oxide (WSiOx) and TiN electrode to prevent the randomly diffusing oxygen ions surpassing the storage region of the WSiON layer. The double-layer WSiOx/WSiON memory structure would enhance the endurance over 100 times so as to better confirm the WSiOx RRAM application of nonvolatile memory.
Engineering interface-type resistance switching based on forming current compliance in ITO/Ga2O3: ITO/TiN resistance random access memory: Conduction mechanisms, temperature effects, and electrode influence
(2016-10-31)
Pan, Chih-Hung
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
;
Chen, Po-Hsun
In this paper, an ITO/Ga2O3: ITO/TiN structured resistance random access memory is introduced. Either interface or filament conduction mechanism can be induced depending on the forming compliance current, which has not been investigated before. Material analyses and electrical I-V measurements on this ITO/Ga2O3: ITO/TiN have also been carried out. The interface conduction mechanism was confirmed by a size-effect experiment, where resistance varied inversely to via size. In addition, the current fitting results show that Schottky emission dominates the on-and off-state currents. All physical mechanisms of device resistive switching behaviors are explained by our models and also confirmed by I-V characteristics. Published by AIP Publishing.
Enhanced electrical behavior from the galvanic effect in Ag-Cu alloy electrode conductive bridging resistive switching memory
(2018-07-30)
Tseng, Yi-Ting
;
Chen, I-Chieh
;
Chang, Ting-Chang
;
Huang, J. C.
;
Shih, Chih-Cheng
In this study, an Ag-Cu alloy was chosen as the electrode in conductive bridging random access memory (CBRAM), with results indicating a significant decrease in forming voltage. In addition, resistive switching characteristics as well as a retention test indicated better stability and a resistive switching window of at least an order, The switching time of the Ag-Cu alloy CBRAM is shorter than that of both Ag and Cu electrode CBRAMs under fast current-voltage (fast I-V). The experimental result indicated that the mechanism was dominated by the galvanic effect. Active atoms (Ag) captured electrons of inactive atoms (Cu) and generated metallic ions (Cu ions) in the alloy electrode, Cu ions drifted into the insulator and generated a conductive path when applying voltage bias, The use of this alloy as an electrode in CBRAM can significantly decrease forming voltage and enhance CBRAM characteristics. Published by AIP Publishing.