Browsing by Author "Chen, Yan-Zhi"

Now showing 1 - 3 of 3

Achieving highly saturated single-color and high color-rendering-index white light-emitting electrochemical cells by CsPbX3 perovskite color conversion layers
(2018-12-21)
Wang, Cheng-Ming
;
Su, Yong-Ming
;
Shih, Ting-An
;
Chen, Guan-Yu
;
Chen, Yan-Zhi
Solid-state light-emitting electrochemical cells (LECs) have been thought to be applicable for display and lighting due to their advantages such as simple device architecture, low-voltage operation and compatibility with inert cathode metals. Among the emissive materials of LECs, ionic transition metal complexes (iTMCs) exhibit relatively higher emission efficiency but they show relatively broader emission spectra, resulting in lower color saturation for display application. Here, we demonstrated that by integrating perovskite-based color conversion layers (CCLs) with blue iTMC-LECs, highly saturated green, yellow, red and deep-red and high color-rendering-index (CRI) white LECs can be obtained. The Commission Internationale de l'E'clairage (CIE) 1931 coordinates of the highly saturated single-color LECs are almost on the boundary of the National Television System Committee (NTSC) color gamut, showing their potential application in display. By mixing perovskites of different colors at an appropriate ratio in the CCLs, the white LECs show a CRI >90, which is among the highest reported values, and a correlated color temperature of 2649 K. Hence the proposed technique can also be one of the good candidates for lighting applications. In addition, both the highly saturated single-color and white LECs still exhibit efficient emission for display and lighting applications.
Cationic Ir-III Emitters with Near-Infrared Emission Beyond 800 nm and Their Use in Light-Emitting Electrochemical Cells
(2019-04-11)
Chen, Guan-Yu
;
Chang, Bo-Ren
;
Shih, Ting-An
;
Lin, Chien-Hsiang
;
Lo, Chieh-Liang
Solid-state near-infrared (NIR) light-emitting devices have recently received considerable attention as MR light sources that can penetrate deep into human tissue and are suitable for bioimaging and labeling. in addition, solidstate NIR light-emitting electrochemical cells (LECs) have shown several promising advantages over NIR organic light-emitting devices (OLEDs). However, among the reported NIR LECs based on ionic transition-metal complexes (iTMCs), there is currently no iridium-based LEC that displays NIR electroluminescence (EL) peaks near to or above 800 nm. In this report we demonstrate a simple method for adjusting the energy gap between the highest-occupied molecular orbital (HOMO) and the lowest-unoccupied molecular orbital (LUMO) of iridium-based iTMCs to generate NIR emission. We describe a series of novel ionic iridium complexes with very small energy gaps, namely NIR1-NIR6, in which 2,3-diphenylbenzo[g]quinoxaline moieties mainly take charge of the HOMO energy levels and 2,2'-biquinoline, 2-(quinolin-2-yl)quinazoline, and 2,2'-bibenzo[d]thiazole moieties mainly control the LUMO energy levels. All the complexes exhibited NIR phosphorescence, with emission maxima up to 850 nm, and have been applied as components in LECs, showing a maximum external quantum efficiency (EQE) of 0.05% in the EL devices. By using a host-guest emissive system, with the iridium complex RED as the host and the complex NIR3 or NIR6 as guest, the highest EQE of the LECs can be further enhanced to above 0.1%.
Highly efficient blue and white light-emitting electrochemical cells employing substrates containing embedded diffusive layers
(2020-02-01)
Chen, Yan-Zhi
;
Luo, Dian
;
Hsiang, Chi-Haw
;
Yi, Rong-Huei
;
Lin, Ching-Hsuan
Enhancing device efficiencies of the blue and white light-emitting electrochemical cells (LECs) is realized by employing substrates with embedded diffusive layers containing scattering TiO2 nanoparticles (NPs). The diffusive layers can eliminate the influence of microcavity effect on the output electroluminescence (EL) spectrum and recover the intrinsic EL spectrum of the emissive layer. The emission zone positions of the blue and white LECs are estimated by fitting the measured EL spectra with the simulated EL spectra based on precisely tuned emission zone positions. Incorporating red-emitting guest dopant in the white LEC results in shifted emission zone toward the cathode due to enhanced electron trapping. The external quantum efficiency (EQE) of the blue and white LECs employing proper diffusive substrates can be enhanced by 260 and 210%, respectively. The maximal EQE (power efficiency) of the blue and white LECs reach 35.4% (83.4 lm W-1) and 22.0% (41.6 lm W-1), respectively. These promising device efficiencies confirm the potential applications for the proposed diffusive substrates in enhancing light extraction from LECs. In addition, adjusting the effective refractive index of the diffusive layer has distinct effect on different EL emission color. With well confined optical field of blue EL in indium tin oxide layer, lower effective refractive index of the diffusive layer results in higher refractive index difference between the scattering TiO2 NPs and the host medium, rendering higher scattering efficiency and more light extraction. In contrast, higher effective refractive index of the diffusive layer leads to unguided red EL extending into the diffusive layer and more light can be outcoupled. These results show that the effective refractive index of the diffusive layer should be judiciously chosen according to the emission color of EL to be extracted.