Browsing by Author "Chou, Hung-Sheng"

Now showing 1 - 2 of 2

Element Effects on High-Entropy Alloy Vacancy and Heterogeneous Lattice Distortion Subjected to Quasi-equilibrium Heating
(2019-10-15)
Huang, E-Wen
;
Chou, Hung-Sheng
;
Tu, K. N.
;
Hung, Wei-Song
;
Tu-Ngoc Lam
We applied Simmons-Balluffi methods, positron measurements, and neutron diffraction to estimate the vacancy of CoCrFeNi and CoCrFeMnNi high-entropy alloys (HEAs) using Cu as a benchmark. The corresponding formation enthalpies and associated entropies of the HEAs and Cu were calculated. The vacancy-dependent effective free volumes in both CoCrFeNi and CoCrFeMnNi alloys are greater than those in Cu, implying the easier formation of vacancies by lattice structure relaxation of HEAs at elevated temperatures. Spatially resolved synchrotron X-ray measurements revealed different characteristics of CoCrFeNi and CoCrFeMnNi HEAs subjected to quasi-equilibrium conditions at high temperatures. Element-dependent behavior revealed by X-ray fluorescence (XRF) mapping indicates the effect of Mn on the Cantor Alloy.
Hardening steels by the generation of transient phase using additive manufacturing
(2019-06-01)
Huang, E-Wen
;
Lee, Soo Yeol
;
Jain, Jayant
;
Tong, Yang
;
An, Ke
In the present work, the tensile properties of 15-5 PH steel fabricated by selective laser melting (SLM) were examined with respect to the transient austenite phase. Compared with the 8%-transient-phase sample, the 18%-transient-phase one shows higher ultimate tensile strength and relatively low yield strength, as well as hardening behavior. We conducted in-situ neutron-diffraction study to examine the microstructure evolution for mechanistic understanding. After applying the external load, most non-equilibrium, retained austenite in the 8% transient-phase sample transforms before the yield strength, whereas in the 18%-transient-phase sample only 50% of the austenite transforms. Accompanying with the phase transformation, a decrease in the dislocation density and the dislocation strain energy-assisted phase transformation of the ferrite phase are found in the 8%-transient-phase sample even before yielding, which, however, is not the case in the 18%-transient-phase sample. The study demonstrates the SLM enables tuning the amount of transient-phase ratio and coherency between phases to realize a mechanical property control for additive manufactured steel.