Browsing by Author "Ho, Ching-Hwa"

Now showing 1 - 5 of 5

Analog Circuit Applications Based on All-2D Ambipolar ReSe2 Field-Effect Transistors
(2019-05-01)
Lee, Ko-Chun
;
Yang, Shih-Hsien
;
Sung, Yung-Shang
;
Chang, Yuan-Ming
;
Lin, Che-Yi
Complementary circuits based on 2D materials show great promise for next-generation electronics. An ambipolar all-2D ReSe2 field-effect transistor (FET) with a hexagonal boron nitride gate dielectric is fabricated and its electronic characteristics are comprehensively studied by temperature dependence and noise measurements. Ambipolar transfer characteristics are achieved owing to the tunable Fermi level of the graphene contact and negligible and 30 meV Schottky barrier heights for the n- and p-channel regimes, respectively. An inverter is also fabricated to demonstrate ambipolar ReSe2 FET operation in a logic circuit. Furthermore, a p/n switchable unipolar FET is designed and shows potential for building complimentary circuits from a signal device. This work demonstrates the potential of all-2D ReSe2 FETs and makes available new approaches for designing next-generation devices.
High Mobilities in Layered InSe Transistors with Indium-Encapsulation-Induced Surface Charge Doping
(2018-11-02)
Li, Mengjiao
;
Lin, Che-Yi
;
Yang, Shih-Hsien
;
Chang, Yuan-Ming
;
Chang, Jen-Kuei
Tunability and stability in the electrical properties of 2D semiconductors pave the way for their practical applications in logic devices. A robust layered indium selenide (InSe) field-effect transistor (FET) with superior controlled stability is demonstrated by depositing an indium (In) doping layer. The optimized InSe FETs deliver an unprecedented high electron mobility up to 3700 cm(2) V-1 s(-1) at room temperature, which can be retained with 60% after 1 month. Further insight into the evolution of the position of the Fermi level and the microscopic device structure with different In thicknesses demonstrates an enhanced electron-doping behavior at the In/InSe interface. Furthermore, the contact resistance is also improved through the In insertion between InSe and Au electrodes, which coincides with the analysis of the low-frequency noise. The carrier fluctuation is attributed to the dominance of the phonon scattering events, which agrees with the observation of the temperature-dependent mobility. Finally, the flexible functionalities of the logic-circuit applications, for instance, inverter and not-and (NAND)/not-or (NOR) gates, are determined with these surface-doping InSe FETs, which establish a paradigm for 2D-based materials to overcome the bottleneck in the development of electronic devices.
Low-Voltage Operational, Low-Power Consuming, and High Sensitive Tactile Switch Based on 2D Layered InSe Tribotronics
(2019-05-09)
Li, Mengjiao
;
Yang, Feng-Shou
;
Hsiao, Yung-Chi
;
Lin, Che-Yi
;
Wu, Hsing-Mei
Electronics based on layered indium selenide (InSe) channels exhibit promising carrier mobility and switching characteristics. Here, an InSe tribotronic transistor (denoted as w/In InSe T-FET) obtained through the vertical combination of an In-doped InSe transistor and triboelectric nanogenerator is demonstrated. The w/In InSe T-FET can be operated by adjusting the distance between two triboelectrification layers, which generates a negative electrostatic potential that serves as a gate voltage to tune the charge carrier transport behavior of the InSe channel. Benefiting from the surface charging doping of the In layer, the w/In InSe T-FET exhibits high reliability and sensitivity with a large on/off current modulation of 10(6) under a low drain-source voltage of 0.1 V and external frictional force. To demonstrate its function as a power-saving tactile sensor, the w/In InSe T-FET is used to sense INSE in Morse code and power on a light-emitting diode. This work reveals the promise of 2D material-based tribotronics for use in nanosensors with low power consumption as well as in intelligent systems.
Multifunctional full-visible-spectrum optoelectronics based on a van der Waals heterostructure
(2019-12-01)
Yang, Shih-Hsien
;
Lee, Ko-Chun
;
Tsai, Meng-Yu
;
Chang, Yuan-Ming
;
Lin, Che-Yi
Multifunctional devices are expected to allow development of low-cost, highly integrated, and energy-efficient electronics for the internet of things (IoT) era. Here, we demonstrate an all-two-dimensional ReSe2/h-BN/graphene heterostructure (ReSe2 HS) consisting of a vertically coupled ReSe2 field-effect transistor and charge storage component, which possesses multifunctional characteristics for use in electronics and optoelectronics. As an electrically controlled non-volatile memory (NVM), the ReSe2 HS delivers high-performance multilevel data storage with a readout on/off current ratio exceeding 10(5) and excellent durability (> 10(4) s) at an ultralow V-ds of 50 mV, which benefits to the development of power saving devices. The ReSe2 HS design and high-photoresponsivity ReSe2 channel also achieve an energy efficient optical NVM with full-visible-spectrum distinction. Besides, the ReSe2 HS displays unique ambipolarity to operate as either an inverter or frequency doubler. We further propose a power-free ReSe2 HS optical memory matrix to simplify imaging systems. The ReSe2 HS shows promise for use in light-programmable information storage systems and neuromorphic computation with low power consumption.
Oxidation-boosted charge trapping in ultra-sensitive van der Waals materials for artificial synaptic features
(2020-06-12)
Yang, Feng-Shou
;
Li, Mengjiao
;
Lee, Mu-Pai
;
Ho, I-Ying
;
Chen, Jiann-Yeu
Exploitation of the oxidation behaviour in an environmentally sensitive semiconductor is significant to modulate its electronic properties and develop unique applications. Here, we demonstrate a native oxidation-inspired InSe field-effect transistor as an artificial synapse in device level that benefits from the boosted charge trapping under ambient conditions. A thin InOx layer is confirmed under the InSe channel, which can serve as an effective charge trapping layer for information storage. The dynamic characteristic measurement is further performed to reveal the corresponding uniform charge trapping and releasing process, which coincides with its surface-effect-governed carrier fluctuations. As a result, the oxide-decorated InSe device exhibits nonvolatile memory characteristics with flexible programming/erasing operations. Furthermore, an InSe-based artificial synapse is implemented to emulate the essential synaptic functions. The pattern recognition capability of the designed artificial neural network is believed to provide an excellent paradigm for ultra-sensitive van der Waals materials to develop electric-modulated neuromorphic computation architectures. Developing efficient memory and artificial synaptic systems based on environmentally sensitive van der Waals materials remains a challenge. Here, the authors present a native oxidation-inspired InSe field-effect transistor that benefits from a boosted charge trapping behavior under ambient conditions.