Browsing by Author "Hsiao, Chun-Ping"

Now showing 1 - 4 of 4

Aerosol-Assisted Plasma Deposition of Biocomposite Coatings: Investigation of Processing Conditions on Coating Properties
(2016-12)
Hsiao, Chun-Ping
;
Wu, Cheng-Chen
;
Liu, Yung-Hsin
;
Yang, Yi-Wei
;
Cheng, Yun-Chien
The aerosol-assisted atmospheric-pressure planar dielectric-barrier-discharge-type plasma deposition (AA-APPD) system can polymerize monomers and immobilize biomolecules simultaneously. In this paper, we used this technology to deposit biocomposite thin films of polyethylene (PE) along with lysozyme (Lyz) under different aerosol solution temperatures and at different coating positions in the discharge region. In addition, we compared the deposition efficacy of two kinds of Lyz solution using deionized (DI)-water and phosphate-buffered saline (PBS) as solvents, respectively. The results show that deposition rate of thin films increases with increasing solution temperature at most coating positions. In addition, coatings from Lyz-PBS perform higher deposition rates, but with weaker Lyz viability as compared with that of Lyz DI-water. Finally, we also verified that this DBD-type AA-APPD system can not only successfully deposit Lyz in PE thin film, but also maintain Lyz viability after plasma process under different solution temperatures and positions.
Aerosol-Assisted Plasma Deposition of Biocomposite Coatings: Investigation of Processing Conditions on Coating Properties
(2016-12-01)
Hsiao, Chun-Ping
;
Wu, Cheng-Chen
;
Liu, Yung-Hsin
;
Yang, Yi-Wei
;
Cheng, Yun-Chien
The aerosol-assisted atmospheric-pressure planar dielectric-barrier-discharge-type plasma deposition (AA-APPD) system can polymerize monomers and immobilize biomolecules simultaneously. In this paper, we used this technology to deposit biocomposite thin films of polyethylene (PE) along with lysozyme (Lyz) under different aerosol solution temperatures and at different coating positions in the discharge region. In addition, we compared the deposition efficacy of two kinds of Lyz solution using deionized (DI)-water and phosphate-buffered saline (PBS) as solvents, respectively. The results show that deposition rate of thin films increases with increasing solution temperature at most coating positions. In addition, coatings from Lyz-PBS perform higher deposition rates, but with weaker Lyz viability as compared with that of Lyz DI-water. Finally, we also verified that this DBD-type AA-APPD system can not only successfully deposit Lyz in PE thin film, but also maintain Lyz viability after plasma process under different solution temperatures and positions.
Enhancing adhesion and polymerization of lipase-plasma-polymerized-ethylene coatings deposited with planar dielectric-barrier-discharge-type aerosol-assisted atmospheric-pressure plasma system
(2018-04-01)
Cheng, Yun-Chien
;
Hsiao, Chun-Ping
;
Liu, Yung-Hsin
;
Yang, Chu-Hao
;
Chiang, Chun-Yi
To enhance the adhesion and polymerization of lipase-plasma-polymerized-ethylene (lipase-PPE) coatings deposited by aerosol-assisted atmospheric plasma deposition (AAAPPD), the effects of voltage, ceramic-dielectric thickness, and pre-coated PPE layer were investigated. In AAAPPD system, ethylene and lipase-phosphate-buffered-saline aerosol were used as precursors to polymerize ethylene and embed lipase simultaneously. The deposited lipase-PPE coatings were analyzed with FTIR, SEM, and surface profiler. The results show that increasing voltage from 3 to 4 kV and decreasing ceramic-dielectric thickness from 1 to 0.38 mm improved the coating adhesion and polymerization. Also, depositing a PPE layer with high energy prior to lipase-PPE coating enhanced adhesion. These improvements of the biomolecule-PPE coatings facilitate further bioapplications of this new biomolecule-embedding method.
The Optimization of Plasma-Activated Water Treatments to Inactivate Salmonella Enteritidis (ATCC 13076) on Shell Eggs
(2019-10-01)
Lin, Chia-Min
;
Chu, Yu-Chi
;
Hsiao, Chun-Ping
;
Wu, Jong-Shinn
;
Hsieh, Chang-Wei
Egg is a regularly consumed food item. Currently, chlorinated water washing is the most common practice used to disinfect eggs, but this process has a negative environmental impact. A new physical technique, plasma-activated water (PAW), has been demonstrated to possess effective antibacterial activities without long-term chemical residue. In this study, air PAW was used to inactivate Salmonella enterica serovar Enteritidis on shell eggs. Different combinations of activation parameters, including water sources (reverse osmotic (RO) water, tap water), power (40 W, 50 W, 60 W) and activation time (10 min, 20 min, 30 min), were evaluated. The oxidation-reduction potential (ORP) and pH values of each combination were measured, and their antibacterial activity was tested in a bacterial suspension. Higher antibacterial activities, higher ORP values, and lower pH values were obtained with higher power, longer activation time, and lower water hardness. The antibacterial activities of PAW decreased rapidly by increasing the storage time both at room and refrigeration temperatures. Afterwards, RO water was pre-activated for 20 min at 60 W, and then the eggs inoculated with S. enteritidis were placed into PAW for 30 s, 60 s, 90 s, or 120 s with a plasma on-site treatment in the water. More than a 4 log reduction was obtained with 60-s and 120-s treatments. The results showed that the freshness indexes of the eggs treated with PAW were similar to those of the untreated controls and better than those of the eggs treated with commercial processes. In addition, observation under a scanning electron microscope also showed less surface damage of the cuticle on the PAW-treated eggs than on the commercially treated eggs. The results of this study indicate that PAW could be an effective antibacterial agent with less damage to the freshness of shell eggs than commercial methods.