Browsing by Author "Huang, Yi-Jiun"

Now showing 1 - 4 of 4

An universal electron transport layer involving hydrogen plasma-treated tungsten disulfide nanosheets doped zinc oxide layers for polymer donors with fullerene or small molecule acceptor photovoltaics
(2019-09-01)
Huang, Yi-Jiun
;
Yen, Po-Jen
;
Wang, Hao-Cheng
;
Chen, Hsiu-Cheng
;
Wei, Kung-Hwa
A new universal electron transport layer that involves doping hydrogen-plasma-treated tungsten disulfide (WS2) nanosheets into ZnO for polymer/fullerene or small molecule organic photovoltaics (OPVs) was prepared. A hydrogen plasma treatment was used to alter the structures of WS2 nanosheets such that the W6+ content was converted into W4+; then ZnO:WS2 nanosheets composites were prepared to form electron transport layers (ETLs). The energy band of the ZnO:WS2 films could be tuned from 5.15 to 4.60 eV by varying the concentration of the WS2 nanosheets up to 0.5 wt%. It was found that ZnO:WS2 ETLs exhibited superior charge transport properties than those of the pristine ZnO layer because of the structure changes, as determined from the X-ray scattering characterizations. OPVs incorporating active layers of PTB7-TH/PC71BM and PTB7-TH/IDIC blends exhibited their power conversion efficiencies of 10.3% and 6.7%, respectively, with the incorporation of 0.3 wt% of the WS2 nanosheets, up from 8.9% to 5.4% for the corresponding devices featuring pristine ZnO-relative increases of 16% and 24%, respectively. This study demonstrates the effectiveness of hydrogen plasma treatment for altering the surface structures of two-dimensional transition-metal-dichalcogenide nanosheets, and paves a way for the composite electron transport layers for use in organic photovoltaics.
Block Copolymer-Tuned Fullerene Electron Transport Layer Enhances the Efficiency of Perovskite Photovoltaics
(2016-09-21)
Lin, Hsi-Kuei
;
Su, Yu-Wei
;
Chen, Hsiu-Cheng
;
Huang, Yi-Jiun
;
Wei, Kung-Hwa
In this study, we enhanced the power conversion efficiency (PCE) of perovskite solar cells by employing an electron transfer layer (ETL) comprising [6,6]phenyl-C-61-butyric acid methyl ester (PC61BM) and, to optimize its morphology, a small amount of the block copolymer polystyreneb-poly(ethylene oxide) (PS-b-PEO), positioned on the perovskite active layer. When incorporating 0.373 wt, % PS-b-PEO into PC61BM, the PCE of the perovskite photovoltaic device increased from- 9.4% to 13.4%, a relative increase of 43%, because of a large enhancement in the fill factor of the device. To\' decipher the intricate morphology of the ETL, we used synchrdtron grazing-incidence small-angle X-ray scattering for determining the PC61BM cluster site, atomic force microscopy and scanning electron microscopy for probing the-surface, and transmission electron microscopy for observing the aggregation of PC61BM in the ETL. We found that the interaction between PS-b-PEO and PC61BM resulted in smaller PC61BM dusters that further aggregated into dendritic structures in some domains, a result of the similar polarities of the PS block and PC61BM; this behavior could \'be used to tune the morphology of the ETL. The optimal PS-b-PEO-mediated PC61BM cluster size in the ETT, was 17 nm, a large reduction from 59 nin for the pristine PC61BM layer. This approach ofincorporating a small amount of nanostructured block copolymer into a fullerene allowed us to effectively tune the morphology of the ETL on the perovskite active layer and resulted in enhanced fill factors of the devices and thus their device efficiency.
Doping ZnO Electron Transport Layers with MoS2 Nanosheets Enhances the Efficiency of Polymer Solar Cells
(2018-06-13)
Huang, Yi-Jiun
;
Chen, Hsiu-Cheng
;
Lin, Hsi-Kuei
;
Wei, Kung-Hwa
;
材料科學與工程學系
In this study, we incorporated molybdenum disulfide (MoS2) nanosheets into sol-gel processing of zinc oxide (ZnO) to form ZnO:MoS2 composites for use as electron transport layers (ETLs) in inverted polymer solar cells featuring a binary bulk heterojunction active layer. We could effectively tune the energy band of the ZnO:MoS2 composite film from 4.45 to 4.22 eV by varying the content of MoS2 up to 0.5 wt %, such that the composite was suitable for use in bulk heterojunction photovoltaic devices based on poly [bis (5-(2- ethylhexyl) thi en-2-yl)benzo dithiophene-alt-(4-(2-ethylhexyl)-3-fluorothienothiophene)-2-carboxylate-2,6-diyl] (PTB7-TH)/phenyl-C-71-butryric acid methyl ester (PC71BM). In particular, the power conversion efficiency (PCE) of the PTB7-TH/PC71 BM (1:1.5, w/w) device incorporating the ZnO:MoS2 (0.5 wt %) composite layer as the ETL was 10.1%, up from 8.8% for the corresponding device featuring ZnO alone as the ETL, a relative increase of 15%. Incorporating a small amount of MoS2 nanosheets into the ETL altered the morphology of the ETL and resulted in enhanced current densities, fill factors, and PCEs for the devices. We used ultraviolet photoelectron spectroscopy, synchrotron grazing incidence wide-/small-angle X-ray scattering, atomic force microscopy, and transmission electron microscopy to characterize the energy band structures, internal structures, surface roughness, and morphologies, respectively, of the ZnO:MoS2 composite films.
Structural development of gold and silver nanoparticles within hexagonally ordered spherical micellar diblock copolymer thin films
(2014-06-07)
Chen, Chia-Min
;
Huang, Yi-Jiun
;
Wei, Kung-Hwa
;
材料科學與工程學系
;
Department of Materials Science and Engineering
The spatial arrangement of metal nanoparticle (NP) arrays in block copolymers has many potential applications in OFET-type memory devices. In this study, we adopted a trapping approach in which we used a monolayer thin film of polystyrene-block-poly(4-vinylpyridine) (PS56k-b-P4VP(8k))-a highly asymmetric diblock copolymer having a spherical micelle morphology to incorporate various amounts of one-phase-synthesized dodecanethiol-passivated silver (DT-Ag) NPs and a fixed amount of ligand-exchanged pyridine-coated gold (Py-Au) NPs into the polystyrene (PS) and poly(4-vinylpyridine) (P4VP) blocks, respectively. We characterized the packing of these metal NPs in the two blocks of the nanostructured diblock copolymer using reciprocal-space synchrotron grazing incidence small-angle X-ray scattering (GISAXS) as well as atomic force microscopy (AFM) and transmission electron microscopy (TEM) in the real space. The packing of the Ag NPs in the PS block was dependent on their content, which we tuned by varying the concentrations in the composite solution at a constant rate of spin-coating. The two-dimensional hierarchical arrangement of Ag and Au NPs within the BCP thin films was enhanced after addition of the Py-Au NPs into the P4VP block and after spin-coating a thinner film from a low concentration solution (0.1 wt%), due to the DT-Ag NPs accumulating around the Py-Au/P4VP cores; this two-dimensional hierarchical arrangement decreased at a critical DT-Ag NP weight ratio (c) of 0.8 when incorporating the Py-Au NPs into the P4VP domains through spin-coating at higher solution concentration (0.5 wt%), where the DT-Ag NPs realigned by rotating 20 degrees along the z axis in the real space, due to oversaturation of the DT-Ag NPs within the PS domains.