Browsing by Author "Hung, Yu-Han"

Now showing 1 - 4 of 4

Manipulation of Heteroatom Substitution on Nitrogen and Phosphorus Co-Doped Graphene as a High Active Catalyst for Hydrogen Evolution Reaction
(2019-09-12)
Hung, Yu-Han
;
Dutta, Dipak
;
Tseng, Chung-Jen
;
Chang, Jeng-Kuei
;
Bhattacharyya, Aninda J.
Graphene doped with heteroatoms is known to create a unique electronic structure with comparatively much higher active sites by the synergistic coupling effect. However, in the earlier attempts, the atomic structure of such co-doped graphene could not be altered; thus, there is a lack of reports discussing the influence of the atomic arrangement in the catalytic performance of the co-doped graphene. Here, by co-doping P and N atoms in graphene as a model system, we present a facile and two-step process wherein the sequence of doping helps in manipulating the heteroatom substitution, which is of great importance in defining better crystallinity and conductivity and favorable elemental functionalities and hence improving catalytic performance. The present method provides a clean, flexible, binder-free, and readily available electrocatalyst that avoids tedious conventional synthesis and device fabrication steps. The highest P-doping percentage (6 at. %) in the present work is superior to previous reports (3 at. %). By altering the sequence of N- and P-doping, the co-doped graphene electrode displayed excellent performance, with an increment of 148% in the sp(2) domain size and enormous lowering in overpotential and Tafel slope (78%). Further, the efficiency of the hydrogen evolution reaction catalyst sustains >98% for 20 h, which is significantly higher than the well-known MoSx (63%). Although here the P-N co-doped system was utilized as a proof of concept, this method could be adapted for other versatile co-doped graphene. This work may pave the way for the development of co-doped graphene-based devices where manipulation of atomic arrangement can result in a structure with properties desirable for catalytic or electronics applications.
Nanocatalyst-Assisted Fine Tailoring of Pore Structure in Holey-Graphene for Enhanced Performance in Energy Storage
(2019-10-09)
Dutta, Dipak
;
Jiang, Jian-Yong
;
Jamaluddin, Anif
;
He, Shih-Ming
;
Hung, Yu-Han
Nanoporous holey-graphene (HG) shows potential versatility in several technological fields, especially in biomedical, water filtration, and energy storage applications. Particularly, for ultrahigh electrochemical energy storage applications, HG has shown promise in addressing the issue of low gravimetric and volumetric energy densities by boosting of the ion-transport efficiency in a high-mass-loaded graphene electrode. However, there are no studies showing complete control over the entire pore architecture and density of HG and their effect on high-rate energy storage. Here, we report a unique and cost-effective method for obtaining well-controlled HG, where a copper nanocatalyst assists the predefined porosity tailoring of the HG and leads to an extraordinary high pore density that exceeds 1 x 10(3) mu m(-2). The pore architectures of the hierarchical and homogenous pores of HG were realized through a rationally designed nanocatalyst and the annealing procedure in this method. The HG electrode with a high mass loading results in improved supercapacitor performance that is at least 1 order of magnitude higher than conventional graphene flakes (reduced electrochemically exfoliated graphene (rECG)) in areal capacitance (similar to 100% retention of capacitance until 15 000 cycles), energy density, and power density. The diffusion coefficient of the HG electrode is 1.5-fold higher than that of rECG at a mass loading of 15 mg cm(-2), indicating excellent ion-transport efficiency. The excellent ion-transport efficiency of HG is further proved by nearly 4-fold magnitude lowering of its R-ion (the ionic resistance in the electrolyte-filled pores) value as compared with rECG when estimated for equivalent high-mass loaded electrodes. Furthermore, the HG exhibits a packing density that is 2 orders of magnitude higher than rECG, revealing the utility of the maximum electrode mass and possessing higher volumetric capacitance. The perfect tailoring of HG with optimized porosity allows the achievement of high areal capacitance and excellent cycling stability due to the facile ion-and charge-transport at high-mass-loaded electrodes, which could open a new avenue for addressing the long-existing issue of practical application of graphene-based energy storage devices.
Radio-over-fiber DSB-to-SSB conversion using semiconductor lasers at stable locking dynamics
(2016-05-02)
Hsieh, Kun-Lin
;
Hung, Yu-Han
;
Hwang, Sheng-Kwang
;
Lin, Chien-Chung
;
光電系統研究所
In radio-over-fiber systems, optical single-sideband (SSB) modulation signals are preferred to optical double-sideband (DSB) modulation signals for fiber distribution in order to mitigate the microwave power fading effect. However, typically adopted modulation schemes generate DSB signals, making DSB-to-SSB conversion necessary before or after fiber distribution. This study investigates a semiconductor laser at stable locking dynamics for such conversion. The conversion relies solely on the nonlinear dynamical interaction between an input DSB signal and the laser. Only a typical semiconductor laser is therefore required as the key conversion unit, and no pump or probe signal is necessary. The conversion can be achieved for a broad tunable range of microwave frequency up to at least 60 GHz. In addition, the conversion can be carried out even when the microwave frequency, the power of the input DSB signal, or the frequency of the input DSB signal fluctuates over a wide range, leading to high adaptability and stability of the conversion system. After conversion, while the microwave phase quality, such as linewidth and phase noise, is mainly preserved, a bit-error ratio down to 10(-9) is achieved for a data rate up to at least 8 Gb/s with a detection sensitivity improvement of more than 1.5 dB. (C) 2016 Optical Society of America
Scalable Patterning of MoS2 Nanoribbons by Micromolding in Capillaries
(2016-08-17)
Hung, Yu-Han
;
Lu, Ang-Yu
;
Chang, Yung-Huang
;
Huang, Jing-Kai
;
Chang, Jeng-Kuei
In this study, we report a facile approach to prepare dense arrays of MoS2 nanoribbons by combining procedures. of micromolding in capillaries (MIMIC) and thermolysis of thiosalts ((NH4)(2)MoS4) as the printing ink. The obtained MoS2 nanoribbons had a "thickness reaching as. low as 3.9 nm, a width ranging from 157 to 465 nm, and a length up to 2 cm. MoS2 nanoribbons with an extremely high aspect ratio (lengthiwidtfi) of similar to 7.4 X 10(8) were achieved. The MoS2 pattern can be printed on versatile substrates, such as SiO2/Si, sapphire, Au film, FTO/glass, and graphene-coated glass. The degree of crystallinity of the as-prepared MoS2 was discovered to be adjustable by varying the temperature through postannealing. The high-temperature thermolysis (1000 degrees C) results in high-quality conductive samples, and field-effect transistors, based on the patterned MoS2 nanoribbons were demonstrated and characterized, where the carrier mobility was comparable to that of thin-film MoS2. In contrast, the low-temperature-treated samples (170 degrees C) result in a unique nanocrystalline MOSx structure (x approximate to 2.5), where the abundant and exposed edge sites were obtained from highly dense arrays of nanoribbon structures by this MIMIC patterning method,: The patterned MoSx was revealed to have superior electrocatalytic efficiency (an overpotential of similar to 211 mV at 10 mA/cm(2) and a Tafel slope of 43 mV/dec) in the hydrogen evolution reaction (HER) when compared to the thin-film MoS2. The report introduces a new concept for rapidly fabricating cost-effective and high-density MoS2/MoSx natiostructures on versatile substrates, which may pave the way for potential applications in nanoelectronics/optoelectronics and frontier energy materials.