Browsing by Author "Kan, Paul-Sen"

Now showing 1 - 4 of 4

A 0.325 V, 600-kHz, 40-nm 72-kb 9T Subthreshold SRAM with Aligned Boosted Write Wordline and Negative Write Bitline Write-Assist
(2015-05-01)
Lu, Chien-Yu
;
Chuang, Ching-Te
;
Jou, Shyh-Jye
;
Tu, Ming-Hsien
;
Wu, Ya-Ping
This brief presents a two-port disturb-free 9T subthreshold static random access memory (SRAM) cell with independent single-ended read bitline and write bitline (WBL) and cross-point data-aware write structure to facilitate robust subthreshold operation and bit-interleaving architecture for enhanced soft error immunity. The design employs a variation-tolerant line-up write-assist scheme where the timing of area-efficient boosted write wordline and negative WBL are aligned and triggered/initiated by the same low-going global WBL to maximize the write-ability enhancement. A 72-kb test chip is implemented in United Microelectronics Corp. 40-nm low-power (40LP) CMOS. Full functionality is achieved for V-DD ranging from 1.5 to 0.32 V without redundancy. The measured maximum operation frequency is 260 MHz (450 kHz) at 1.1 V (0.32 V) and 25 degrees C. At 0.325 V and 25 degrees C, the chip operates at 600 kHz with 5.78 mu W total power and 4.69 mu W leakage power, offering 2x frequency improvement compared with 300 kHz of our previous 72-kb 9T subthreshold SRAM design in the same 40LP technology. The energy efficiency (power/frequency/IO) at 0.325 V and 25 degrees C is 0.267 pJ/bit, a 23.7% improvement over the 0.350 pJ/bit of our previous design.
A 40 nm 512 kb Cross-Point 8 T Pipeline SRAM With Binary Word-Line Boosting Control, Ripple Bit-Line and Adaptive Data-Aware Write-Assist
(2014-12-01)
Lien, Nan-Chun
;
Chu, Li-Wei
;
Chen, Chien-Hen
;
Yang, Hao-I.
;
Tu, Ming-Hsien
This paper presents a cross-point 512 kb 8 T pipeline static random-access memory (SRAM). The cross-point structure eliminates write half-select disturb to facilitate bit-interleaving architecture for enhanced soft error immunity. The design employs boosted word-line (WL) for improving both read performance and write-ability. A ripple bit-line (RiBL) structure provides 30%-44% read access performance improvement and 2x-3.5x variation immunity at 0.7 V compared with the conventional hierarchical bit-line (HiBL) schemes. An adaptive data-aware write-assist (ADAWA) with VCS tracking is employed to further enhance the write-ability while ensuring adequate stability for half-selected cells on the selected bit-lines. An adaptive voltage detector (AVD) with binary boosting control is used to mitigating gate electric over-stress. The design is implemented in UMC 40 nm low-power (40LP) CMOS technology. The 512 kb test chip operates from 1.5 V to 0.65 V, with maximum operation frequency of 800 MHz@1.1 V and 200 MHz@0.65 V. The measured power consumption is 0.5 mW/MHz (active) and 4.4 mW (standby) at 1.1 V, and 0.107 mW/MHz (active) and 0.367 mW (standby) at 0.65 V.
A 40nm 1.0Mb 6T Pipeline SRAM with Digital-Based Bit-Line Under-Drive, Three-Step-Up Word-Line, Adaptive Data-Aware Write-Assist with VCS Tracking and Adaptive Voltage Detector for Boosting Control
(2013-01-01)
Liao, Wei-Nan
;
Lien, Nan-Chun
;
Chang, Chi-Shin
;
Chu, Li-Wei
;
Yang, Hao-I
This paper presents a 40nm 1.0Mb pipeline 6T SRAM featuring digital-based Bit-Line Under-Drive (BLUD) with large-signal sensing and Three-Step-Up Word-Line (TSUWL) to improve RSNM, Read performance and Write-ability. An Adaptive DataAware Write-Assist (ADAWA) with VCS tracking is employed to further improve Write-ability while ensuring adequate stability for half-selected cells on the selected bit-lines. An Adaptive Voltage Detector (AVD) with binary boosting control is used to mitigate gate dielectric over-stress. The 1.0Mb test chip operates from 1.5V to 0.7V, with operating frequency of 1.07GHz@1.2V and 887MHz@1.1V at 25 degrees C. The measured power consumption is 43.47mW (Active)/3.91mW (Leakage) at 1.1V and 8.97mW (Active)/0.52mW (Leakage) at 0.7V, TT, 25 degrees C.
A 40nm 1.0Mb Pipeline 6T SRAM with Variation-Tolerant Step-Up Word-Line and Adaptive Data-Aware Write-Assist
(2013)
Chang, Chi-Shin
;
Yang, Hao-I
;
Liao, Wei-Nan
;
Lin, Yi-Wei
;
Lien, Nan-Chun
We present a 1.0Mb pipeline 6T SRAM in 40nm Low-Power CMOS technology. The design employs a variation-tolerant Step-Up Word-Line (SUWL) to improve the Read Static Noise Margin (RSNM) without compromising the Read performance and Write-ability. The Write-ability is further enhanced by an Adaptive Data-Aware Write-Assist (ADAWA) scheme. The 1.0Mb test chip operates from 1.5V to 0.7V, with operating frequency of 800MHz@1.2V and 25 degrees C. The measured power consumption is 23.21mW (Active)/2.42mW (Leakage) at 1.2V, TT, 25 degrees C; and 6.01mW (Active)/0.35mW (Leakage) at 0.7V, TT, 25 degrees C.