Browsing by Author "Lee, Ming-Tsang"

Now showing 1 - 3 of 3

An experimental and analytical investigation of the photo-thermal-electro characteristics of a high power InGaN LED module
(2016-04-05)
Yang, Kai-Shing
;
Ding, Wei-Ting
;
Yeh, Chih-Ting
;
Lee, Ming-Tsang
;
Wang, Chi-Chuan
The photo-thermal-electro characteristics of a high power InGaN LED module were studied both experimentally and theoretically. Three types of heat sink substrate composed of two layers of materials were used to investigate the coupled relationships between chip temperature, thermal resistance, input electric power and light emission efficiency. The results showed that the thermal spreading resistance accounts for a significant fraction of the total substrate thermal resistance. The measured thermal resistance of the LED module increased with rising electric power input. Luminescent efficacy measurements revealed that this increase of thermal resistance was the result of increased heat dissipation from the chip due to less efficient conversion of electric power to light output. Furthermore, experimental results showed that the radiant efficiency of the LED decreases with increasing input electric power. The coupled effects of chip temperature, input power and thermal resistance of the substrate are responsible for this efficiency droop. A revised model for estimating the luminous efficacy that takes both thermal and electrical effects into consideration is proposed. It is shown that the efficiency droop of the LED module for all three types of substrates can be clearly demonstrated by using the proposed analysis. (C) 2015 Elsevier Ltd. All rights reserved.
An experimental study on the heat dissipation of LED lighting module using metal/carbon foam
(2013-11-01)
Yang, Kai-Shing
;
Chung, Chi-Hung
;
Lee, Ming-Tsang
;
Chiang, Song-Bor
;
Wong, Cheng-Chou
In this study, thermal performance of the cooling modules applicable for Par 38 light bulb is investigated. A total of six heat sink modules, including the basic reference design, metal foam, and carbon foam are tested and compared. Tests are performed and analyzed using the transient test method based on JESD51-1 standard. It is found that the thermal resistance from junction to die attach is quite small. By contrast, the thermal resistance of the heat sink dominates the total resistance, and it comprises 55% of the total resistance for the standard heat sink module. With some slight opening on the base plate, the thermal resistance can be improved by approximately 12%. The thermal resistance for the carbon foam having an embedded metal plate shows the least thermal resistance of 1.14 K/W, followed by the carbon foam, and then the metal foam. The lower thermal resistance of carbon foam in association with copper metal foam is due to its higher emissivity. In addition to better heat transfer performance as compared to the standard plate heat sink, the utilization of carbon foam and metal foam can also significantly reduce the weight of the heat sink. In this study, the weight of the heat sink can be reduced as much as 33%. (C) 2013 Elsevier Ltd. All rights reserved.
Silicon Nanowires for Solar Thermal Energy Harvesting: an Experimental Evaluation on the Trade-off Effects of the Spectral Optical Properties
(2016-01-04)
Sekone, Abdoul Karim
;
Chen, Yu-Bin
;
Lu, Ming-Chang
;
Chen, Wen-Kai
;
Liu, Chia-An
Silicon nanowire possesses great potential as the material for renewable energy harvesting and conversion. The significantly reduced spectral reflectivity of silicon nanowire to visible light makes it even more attractive in solar energy applications. However, the benefit of its use for solar thermal energy harvesting remains to be investigated and has so far not been clearly reported. The purpose of this study is to provide practical information and insight into the performance of silicon nanowires in solar thermal energy conversion systems. Spectral hemispherical reflectivity and transmissivity of the black silicon nanowire array on silicon wafer substrate were measured. It was observed that the reflectivity is lower in the visible range but higher in the infrared range compared to the plain silicon wafer. A drying experiment and a theoretical calculation were carried out to directly evaluate the effects of the trade-off between scattering properties at different wavelengths. It is clearly seen that silicon nanowires can improve the solar thermal energy harnessing. The results showed that a 17.8 % increase in the harvest and utilization of solar thermal energy could be achieved using a silicon nanowire array on silicon substrate as compared to that obtained with a plain silicon wafer.