Browsing by Author "Lin, Hsi-Kuei"

Now showing 1 - 6 of 6

Block Copolymer-Tuned Fullerene Electron Transport Layer Enhances the Efficiency of Perovskite Photovoltaics
(2016-09-21)
Lin, Hsi-Kuei
;
Su, Yu-Wei
;
Chen, Hsiu-Cheng
;
Huang, Yi-Jiun
;
Wei, Kung-Hwa
In this study, we enhanced the power conversion efficiency (PCE) of perovskite solar cells by employing an electron transfer layer (ETL) comprising [6,6]phenyl-C-61-butyric acid methyl ester (PC61BM) and, to optimize its morphology, a small amount of the block copolymer polystyreneb-poly(ethylene oxide) (PS-b-PEO), positioned on the perovskite active layer. When incorporating 0.373 wt, % PS-b-PEO into PC61BM, the PCE of the perovskite photovoltaic device increased from- 9.4% to 13.4%, a relative increase of 43%, because of a large enhancement in the fill factor of the device. To\' decipher the intricate morphology of the ETL, we used synchrdtron grazing-incidence small-angle X-ray scattering for determining the PC61BM cluster site, atomic force microscopy and scanning electron microscopy for probing the-surface, and transmission electron microscopy for observing the aggregation of PC61BM in the ETL. We found that the interaction between PS-b-PEO and PC61BM resulted in smaller PC61BM dusters that further aggregated into dendritic structures in some domains, a result of the similar polarities of the PS block and PC61BM; this behavior could \'be used to tune the morphology of the ETL. The optimal PS-b-PEO-mediated PC61BM cluster size in the ETT, was 17 nm, a large reduction from 59 nin for the pristine PC61BM layer. This approach ofincorporating a small amount of nanostructured block copolymer into a fullerene allowed us to effectively tune the morphology of the ETL on the perovskite active layer and resulted in enhanced fill factors of the devices and thus their device efficiency.
Doping ZnO Electron Transport Layers with MoS2 Nanosheets Enhances the Efficiency of Polymer Solar Cells
(2018-06-13)
Huang, Yi-Jiun
;
Chen, Hsiu-Cheng
;
Lin, Hsi-Kuei
;
Wei, Kung-Hwa
;
材料科學與工程學系
In this study, we incorporated molybdenum disulfide (MoS2) nanosheets into sol-gel processing of zinc oxide (ZnO) to form ZnO:MoS2 composites for use as electron transport layers (ETLs) in inverted polymer solar cells featuring a binary bulk heterojunction active layer. We could effectively tune the energy band of the ZnO:MoS2 composite film from 4.45 to 4.22 eV by varying the content of MoS2 up to 0.5 wt %, such that the composite was suitable for use in bulk heterojunction photovoltaic devices based on poly [bis (5-(2- ethylhexyl) thi en-2-yl)benzo dithiophene-alt-(4-(2-ethylhexyl)-3-fluorothienothiophene)-2-carboxylate-2,6-diyl] (PTB7-TH)/phenyl-C-71-butryric acid methyl ester (PC71BM). In particular, the power conversion efficiency (PCE) of the PTB7-TH/PC71 BM (1:1.5, w/w) device incorporating the ZnO:MoS2 (0.5 wt %) composite layer as the ETL was 10.1%, up from 8.8% for the corresponding device featuring ZnO alone as the ETL, a relative increase of 15%. Incorporating a small amount of MoS2 nanosheets into the ETL altered the morphology of the ETL and resulted in enhanced current densities, fill factors, and PCEs for the devices. We used ultraviolet photoelectron spectroscopy, synchrotron grazing incidence wide-/small-angle X-ray scattering, atomic force microscopy, and transmission electron microscopy to characterize the energy band structures, internal structures, surface roughness, and morphologies, respectively, of the ZnO:MoS2 composite films.
Dual nanocomposite carrier transport layers enhance the efficiency of planar perovskite photovoltaics
(2018-01-01)
Lin, Hsi-Kuei
;
Li, Jia-Xing
;
Wang, Hao-Cheng
;
Su, Yu-Wei
;
Wu, Kaung-Hsiung
In photovoltaic devices, more effective transfer of dissociated electrons and holes from the active layer to the respective electrodes will result in higher fill factors and short-circuit current densities and, thus, enhanced power conversion efficiencies (PCEs). Planar perovskite photovoltaics feature an active layer that can provide a large exciton diffusion length, reaching several micrometers, but require efficient carrier transport layers for charge extraction. In this study, we employed two nanocomposite carrier transfer layersan electron transport layer (ETL) comprising [6,6]phenyl-C-61-butyric acid methyl ester (PC61BM) doped with the small molecule 4,7-diphenyl-1,10-phenanthroline (Bphen), to enhance the electron mobility, and a hole transfer layer (HTL) comprising poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) doped with molybdenum disulfide (MoS2) nanosheets, to enhance the hole mobility. We used ultraviolet photoelectron spectroscopy to determine the energy levels of these composite ETLs and HTLs; atomic force microscopy and scanning electron microscopy to probe their surface structures; and transmission electron microscopy and synchrotron grazing-incidence small-angle X-ray scattering to decipher the structures of the ETLs. Adding a small amount (less than 1%) of Bphen allowed us to tune the energy levels of the ETL and decrease the size of the PC61BM clusters and, therefore, generate more PC61BM aggregation domains to provide more pathways for electron transport, leading to enhanced PCEs of the resulting perovskite devices. We used quantitative pump-probe data to resolve the carrier dynamics from the perovskite to the ETL and HTL, and observed a smaller possibility of carrier recombination and a shorter injection lifetime in the perovskite solar cell doubly modified with carrier transport layers, resulting in an enhancement of the PCE. The PCE reached 16% for a planar inverted perovskite device featuring an ETL incorporating 0.5 wt% Bphen within PC61BM and 0.1 wt% MoS2 within PEDOT:PSS; this PCE is more than 50% higher than the value of 10.2% for the corresponding control device.
Enhancing performance of ternary blend photovoltaics by tuning the side chains of two-dimensional conjugated polymer
(2019-08-01)
Chen, Chung-Hao
;
Lu, Yi-Ju
;
Su, Yu-Wei
;
Lin, Yu-Che
;
Lin, Hsi-Kuei
We prepared the ternary blends active layer by incorporating a new two-dimensional donor-acceptor (D/A) conjugated polymer (BDTTBO) comprising benzo-dithiophene-thiophene-thiophene-benzo oxadiazole chemical units that has three different conjugated side chains bithiophene (BT), benzothiophene (BzT) and thienothiophene (TT) BDTTBO-BT, BDTTBO-BzT and BDTTBO-TT into poly (benzodithiophene-fluorothienothiophene) (PTB7-TH) and PC71BM as for organic photovoltaics (OPVs). We expected that incorporating these BDTTBO with different side chains into the blend of PTB7-TH and PC71BM not only can broaden the absorption of solar spectrum thereby increasing short-circuit current density but also tune the packing of PTB7-TH and the dispersion of PC71BM. In particular, we found that incorporating 10% of BDTTBO-BT to form the PTB7-TH:BDTTBO-BT:PC71BM ternary blend (active layer) device could improve the power conversion efficiency to 10.4% from 9.0% for the binary blend of PTB7-TH:PC71BM device-a relative increase of 15%. We examined the packing orientations of the PBDTTBO:PTB7-TH:PC71BM ternary blend films using synchrotron two-dimensional grazing-incidence wide-angle X-ray scattering, and found that the incorporation of 10% relatively higher crystallinity PBDTTBO-BT, PBDTTBO-BzT or PBDTTBO-TT not only altered the packing orientation of PTB7-TH substantially but also reduced PC71BM cluster size in the ternary blend system, as compared to that in the case of PTB7-TH with PC71BM binary blend, thereby providing more pathways for electrons and thus enhancing the carrier transport in the ternary blend, as evidenced by the carrier mobility.
Linear solubilizing side chain substituents enhance the photovoltaic properties of two-dimensional conjugated benzodithiophene-based polymers
(2015-11-19)
Jiang, Jian-Ming
;
Raghunath, Putikam
;
Lin, Yu-Che
;
Lin, Hsi-Kuei
;
Ko, Chen-Lin
In this study we synthesized medium-band gap, two-dimensional (2-D) conjugated polymers comprising electron-rich benzo[1,2-b:4,5-b\'] dithiophene (BDT) units presenting conjugated thiophene (T) side chains and electron-deficient alkoxy-modified 2,1,3-benzooxadiazole (BO) moieties. We introduced various solubilizing substituents-linear alkyl, alkoxy, and alkythio units-on the thiophene side chains to obtain a series of 2-D conjugated D-pi-A polymers: PBDTT-C-BO, PBDTT-O-BO, and PBDTT-S-BO. The solubilizing substituents of the BDT units altered the solubility, conformations, and electronic properties of the synthesized conjugated polymers, allowing tuning of the photovoltaic properties when blended with fullerenes. We investigated the effects of the different linear solubilizing substituents of the BDT units on the structural, optical, and electronic properties (e.g., band gap energies) of the resulting 2-D conjugated polymers, as determined from quantum-chemical calculations, UV-Vis absorption spectra, and grazing-incidence X-ray diffraction. Atomic force microscopy and transmission electron microscopy images revealed the morphologies of active layers comprising these 2-D conjugated polymers and the fullerene derivative [6,6]-phenyl-C-71-butyric acid methyl ester (PC71BM). Through rational structural modifications of the solubilizing substituents in the 2-D conjugated polymers with alkoxy, alkythio or alkyl units, the resulting PCEs varied from 5.4 to 7.5%. A polymer solar cell based on a blend of PBDTT-C-BO and PC71BM exhibited the best photovoltaic performance among our three studied systems, with a high short-circuit current density (J(sc)) of 15.7 mA cm(-2) and a power conversion efficiency of 7.5%, without the need for any processing additives or post-treatment processes, highlighting the importance of careful selection of appropriate solubilizing substituent that attached to the donor segments when designing efficient D-pi-A polymers for use in solar cells. (C) 2015 Elsevier Ltd. All rights reserved.
Location and Number of Selenium Atoms in Two-Dimensional Conjugated Polymers Affect Their Band-Gap Energies and Photovoltaic Performance
(2014-10-28)
Jiang, Jian-Ming
;
Raghunath, Putikam
;
Lin, Hsi-Kuei
;
Lin, Yu-Che
;
Lin, M. C.
We synthesized and characterized a series of novel two-dimensional Se-atom-substituted donor (D)-p-acceptor (A) conjugated polymersPBDTTTBO, PBDTTTBS, PBDTTSBO, PBDTSTBO, PBDTTSBS, PBDTSTBS, PBDTSSBO, and PBDTSSBSfeaturing benzodithiophene (BDT) as the donor, thiophene (T) as the p-bridge, and 2,1,3-benzooxadiazole (BO) as the acceptor with different number of Se atoms at different p-conjugated locations, including the pi-bridge, side chain, and electron-withdrawing units. We then systematically investigated the effect of different locations and the number of Se atoms in these two-dimensional conjugated polymers on the structural, optical, and electronics such as band-gap energies of the resulting polymers, as determined through quantum-chemical calculations, UVvis absorption spectra, and grazing-incidence X-ray diffraction. We found that through the rational structural modification of the 2-D conjugated Se-substituted polymers the resulting PCEs could vary over 3-fold (from 2.4 to 7.6%), highlighting the importance of careful selection of appropriate chemical structures such as the location of Se atoms when designing efficient D-p-A polymers for use in solar cells. Among these tested BO-containing polymers, PBDTSTBO that has moderate band gaps and good open-circuit voltages (up to 0.86 V) when mixed with PC71BM (1:2, w/w) provided the highest power conversion efficiency (7.6%) in a single-junction polymer solar cell, suggesting that these polymers have potential applicability as donor materials in the bulk heterojunction polymer solar cells.