Browsing by Author "Lin, Shu-Wei"

Now showing 1 - 4 of 4

Complementary solvent additives tune the orientation of polymer lamellae, reduce the sizes of aggregated fullerene domains, and enhance the performance of bulk heterojunction solar cells
(2014-01-01)
Liu, Chih-Ming
;
Su, Yu-Wei
;
Jiang, Jian-Ming
;
Chen, Hsiu-Cheng
;
Lin, Shu-Wei
In this study we employed 1-chloronaphthalene (CN) and 1,8-diiodooctane (DIO) as binary additives exhibiting complementarily preferential solubility for processing the crystalline conjugated polymer poly[bis(dodecyl)thiophene-dodecyl-thieno[3,4-c]pyrrole-4,6-dione] (PBTC12TPD) and the fullerene [6,6]-phenyl-C-71-butyric acid methyl ester (PC71BM) in chloroform. Using synchrotron grazing-incidence small-/wide-angle X-ray scattering and transmission electron microscopy to analyse the structure of the PBTC12TPD-PC71BM blend films, we found that the binary additives with different volume ratios in the processing solvent allow us to tune the relative population of face-on to edge-on PBTC12TPD lamellae and the size of PC71BM clusters in the blend films; the sizes of the fractal-like PC71BM clusters and the aggregated domains of PC71BM clusters increased and decreased, respectively, upon increasing the amount of DIO, whereas the relative ratio of face-on to edge-on PBTC12TPD lamellae increased upon increasing the amount of CN. When fabricating the photovoltaic devices, the short-circuit current density of the devices with the PBTC12TPD-PC71BM active layer having been processed with the binary additives is higher than that of the device incorporating an active layer processed without any additive. As a result, the power conversion efficiency of a device incorporating an active layer of PBTC12TPD-PC71BM (1 : 1.5, w/w) processed with binary additives of 0.5% DIO and 1% CN in chloroform increased to 6.8% from a value of 4.9%, a relative increase of 40%, for the corresponding device containing the same active layer but processed without any additive.
Side chain structure affects the molecular packing and photovoltaic performance of oligothiophene-based solution-processable small molecules
(2015-01-01)
Lan, Shang-Che
;
Chang, Chiao-Kai
;
Lu, Yueh-Hsin
;
Lin, Shu-Wei
;
Jen, Alex K. -Y.
In this study we synthesized a series of solution-processable small molecules comprising 2,2'-bithiophene (BTh), terthiophene (TTh), and thiobarbituric acid (TB) units as the central core, pi-conjugated spacer, and acceptor end-capping moieties, respectively, but with alkyl side-chains of different lengths presented from their central BTh units (TBTThBTh-H, TBTThBTh-C4, TBTThBTh-C8, TBTThBTh-C12). We then investigated the structure-property relationships of these compounds in terms of their packing behaviors and bulk heterojunction (BHJ) photovoltaic properties. And we found that the packing of these molecules in neat films is critically dependent of their side-chain lengths, as evidenced by the variations in their lamellar structures determined with grazing-incidence wide-angle X-ray scattering (GIWAXS). The power conversion efficiencies (PCEs) of the photovoltaic BHJ devices comprising these small molecules and PC61BM exhibited zigzag-shaped variations with respect to the alkyl side-chain lengths, with the PCE of devices incorporating TBTThBTh-H and TBTThBTh-C8 being higher than those of devices incorporating TBTThBTh-C4 and TBTThBTh-C12. Using GIWAXS to probe the molecular packing in the BHJ active layers, we found that the alkyl chain lengths of the small molecules had a large impact on the formation of crystallites in the BHJ films; the molecules with more uniform and shorter alkyl side-chain lengths provide stronger intermolecular interactions, being more favorable for the crystallization of these molecules.
Solution-Processed Zinc Oxide/Polyethylenimine Nanocomposites as Tunable Electron Transport Layers for Highly Efficient Bulk Heterojunction Polymer Solar Cells
(2015-03-25)
Chen, Hsiu-Cheng
;
Lin, Shu-Wei
;
Jiang, Jian-Ming
;
Su, Yu-Wei
;
Wei, Kung-Hwa
In this study, we employed polyethylenimine-doped sol-gel-processed zinc oxide composites (ZnO:PEI) as efficient electron transport layers (ETL) for facilitating electron extraction in inverted polymer solar cells. Using ultraviolet photoelectron spectroscopy, synchrotron grazing-incidence small-angle X-ray scattering and transmission electron microscopy, we observed that ZnO:PEI composite films\' energy bands could be tuned considerably by varying the content of PEI up to 7 wt %-the conduction band ranged from 4.32 to 4.0 eV-and the structural order of ZnO in the ZnO:PEI thin films would be enhanced to align perpendicular to the ITO electrode, particularly at 7 wt % PEI, facilitating electron transport vertically. We then prepared two types of bulk heterojunction systems-based on poly(3-hexylthiophene) (P3HT):phenyl-C-61-butryric acid methyl ester (PC61BM) and benzo[1,2-b:4,5-b]dithiophene-thiophene-2,1,3-benzooxadiazole (PBDTTBO):phenyl-C-71-butryric acid methyl ester (PC71BM)-that incorporated the ZnO:PEI composite layers. When using a composite of ZnO:PEI (93:7, w/w) as the ETL, the power conversion efficiency (PCE) of the P3HT:PC61BM (1:1, w/w) device improved to 4.6% from a value of 3.7% for the corresponding device that incorporated pristine ZnO as the ETL-a relative increase of 24%. For the PBDTTBO:PC71BM (1:2, w/w) device featuring the same amount of PEI blended in the ETL, the PCE improved to 8.7% from a value of 7.3% for the corresponding device that featured pure ZnO as its ETL-a relative increase of 20%. Accordingly, ZnO:PEI composites can be effective ETLs within organic photovoltaics.
Symmetry and Coplanarity of Organic Molecules Affect their Packing and Photovoltaic Properties in Solution-Processed Solar Cells
(2014-06-25)
Lan, Shang-Che
;
Raghunath, Putikam
;
Lu, Yueh-Hsin
;
Wang, Yi-Chien
;
Lin, Shu-Wei
In this study we synthesized three acceptor donor acceptor (A-D-A) organic molecules, TB3t-BT, TB3t-BTT, and TB3t-BDT, comprising 2,2\'-bithiophene (BT), benzo[1,2-b:3,4-b\':5,6-d \'\']trithiophene (BTT), and benzo[ 1,2-b;4,5-b\']dithiophene (BDT) units, respectively, as central cores (donors), terthiophene (3t) as pi-conjugated spacers, and thiobarbituric acid (TB) units as acceptors. These molecules display different degrees of coplanarity as evidenced by the differences in dihedral angles calculated from density functional theory. By using differential scanning calorimetry and X-ray diffractions for probing their crystallization characteristics and molecular packing in active layers, we found that the symmetry and coplanarity of molecules would significantly affect the melting/crystallization behavior and the formation of crystalline domains in the blend film with fullerene, PC61BM. TB3t-BT and TB3t-BDT, which each possess an inversion center and display high crystallinity in their pristine state, but they have different driving forces in crystallization, presumably because of different degrees of coplanarity. On the other hand, the asymmetrical TB3t-BTT behaved as an amorphous material even though it possesses a coplanar structure. Among our tested systems, the device comprising as-spun TB3t-BDT/PC61BM (6:4, w/w) active layer featured crystalline domains and displayed the highest power conversion efficiency (PCE) of 4.1%. In contrast, the as-spun TB3t-BT/PC61BM (6:4, w/w) active layer showed well-mixed morphology and with a device PCE of 0.2%; it increased to 3.9% after annealing the active layer at 150 degrees C for 15 min. As for TB3t-BTT, it required a higher content of fullerene in the TB3t-BTT/PC61BM (4:6, w/w) active layer to optimize its device PCE to 1.6%.