Browsing by Author "Lin, Yi-Feng"
Now showing 1 - 6 of 6
- Results Per Page
- Sort Options
Item type:Item, Differential Sensing of Serine and Tyrosine with Aligned CdS Nanowire Arrays Based on pH-Dependent Photoluminescence Behavior(2009-03-09) ;Lin, Yi-Feng ;Hsu, Yung-Jung ;Cheng, Wei-Yun ;Lu, Shih-Yuan材料科學與工程學系The differential sensing of tyrosine and serine is achieved with well-aligned CdS nanowire arrays by exploring the pH-dependent photoluminescence behavior of the nanowire arrays toward exposure to the two amino acid solutions. The contrasting trend in photoluminescence (PL) intensity with respect to variations in analyte concentration observed at pH 11 served as the check point for the present differential sensing. The application format of the nanowire array is better suited for further sensing device assembly than that of nanocrystal suspensions.Item type:Item, Growth of zirconia and yttria-stabilized zirconia nanorod arrays assisted by phase transition(2010) ;Chen, Chih-Chiang ;Cheng, Wei-Yun ;Lu, Shih-Yuan ;Lin, Yi-FengHsu, Yung-JungWell-aligned, densely distributed ZrO(2) nanorod arrays were fabricated using a non-catalytic, template-free metal-organic chemical vapour deposition process at a reaction temperature of 1000 degrees C. The reaction temperature was found to play a key role in product morphology, with particle thin films obtained at 550 degrees C and nanorod arrays produced at 1000 degrees C. Increasing the reaction temperature led to the emergence of the medium-temperature tetragonal phase from the dominant low-temperature monoclinic phase, which is advantageous for anisotropic growth necessary for the nanorod formation. With the same deposition process, yttria-stabilized zirconia nanorod arrays of polycrystalline cubic phase were fabricated by co-feeding the dopant precursor, YCl(3), with the zirconia precursor, Zr(C(5)H(7)O(2))(4). The present work demonstrated the first example of monoclinic to tetragonal phase-transition assisted one-dimensional (1D) growth, and the concept can be extended to the formation of 1D nanostructures of materials possessing the monoclinic-tetragonal polymorphism.Item type:Item, Hydrothermal synthesis, characterizations and photoluminescence study of single crystalline hexagonal ZnO nanorods with three dimensional flowerlike microstructures(2014-05-01) ;Kale, Rohidas B. ;Hsu, Yung-Jung ;Lin, Yi-Feng ;Lu, Shih-Yuan材料科學與工程學系A simple, low-cost, and environmentally benign hydrothermal approach has been successfully developed to synthesize uniform, large-scale well-crystallized ZnO nanorods with different aspect ratios that were united together to form three dimensional (3D) flowerlike structures. The method involved direct growth of ZnO 3D microstructures using aqueous solution of Zn(CH3COO)(2) as the precursor and NaOH to adjust the pH of resultant solution. Surfactants or templates were not used during the entire synthetic process. Moreover, the morphology evolution of the ZnO nanorods with reaction time suggests a recrystallization dissolution growth mechanism that continuously takes place for prolonged interval of time. The XRD pattern of the as-grown ZnO nanorods and relevant analyses confirm the well crystallized hexagonal structure of the ZnO microstructures and no evidence of any other impurity phases. SEM observations reveal that the ZnO product grew in the form of nanorods that were united together to form 3D flowerlike morphology. The high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED) shows that the ZnO nanorods were single crystalline and grew along the c-axis of the crystal plane. PL measurements of the as-synthesized nanorods exhibit excellent excitation features and strong band-edge UV luminescence even at room temperature. The uniform single crystalline, defect free, and high aspect ratio nanorods may find promising applications in optoelectronics and photo-catalysts. The growth habit of ZnO crystal is also illustrated. This method is suitable for large-scale production of ZnO microstructures and could be extended for syntheses of other metal oxides. (C) 2014 Elsevier Ltd. All rights reserved.Item type:Item, Spontaneous reduction of metal ions initiated by ethylenediamine-capped CdS nanowires: A sensing mechanism revealed(2008-05-13) ;Hsu, Yung-Jun ;Lu, Shih-Yuan ;Lin, Yi-Feng ;材料科學與工程學系Department of Materials Science and EngineeringItem type:Item, Superparamagnetism Found in Diluted Magnetic Semiconductor Nanowires: Mn-Doped CdSe(2008-11-20) ;Chen, Chih-Chang ;Hsu, Yung-Jung ;Lin, Yi-Feng ;Lu, Shih-Yuan材料科學與工程學系Diluted magnetic semiconductor (DMS) nanowires (NWs), Mn-doped CdSe, were successfully prepared in a gold-catalyzed vapor-transport deposition process. It was demonstrated for the first time that upon incorporation of Mn of very limited concentrations, the CdSe NWs exhibited enhanced ferromagnetism at T < 40 K and turned superparamagnetic at relatively high temperatures. This finding would extend the application range of DMS NWs into the biolabeling and bioimaging fields.Item type:Item, Well-aligned ternary Cd1-xZnxS nanowire Arrays and their composition-dependent field emission properties(2007-09-13) ;Lin, Yi-Feng ;Hsu, Yung-Jung ;Lu, Shih-Yuan ;Chen, Kuan-TsungTseng, Tseung-YuenWell-aligned plain CdS and ternary Cd1-xZnxS nanowire arrays were successfully fabricated via a noncatalytic and template-free metal-organic chemical vapor deposition process. The nanowires were grown on a 1 mu m thick buffer layer formed in situ on the surface of silicon substrates. These nanowires were 20-40 nm in diameter and 500-900 nm in length. High-resolution transmission electron microscopy analyses revealed that the nanowires were single-cry stalline and grew along the [0001] direction of the hexagonal crystalline phase. The photoluminescence characterizations showed near band edge emissions at 535, 498, and 473 nm for the US nanowire arrays and Cd1-xZnxS nanowire arrays with x values of 0.21 and 0.44, respectively, demonstrating clear color tunability achieved with the composition adjustment of the alloy nanowires. The same morphology. and single-crystallinity of these three nanowire arrays enabled investigation of the composition-dependent field emission characteristics of the nanowire arrays for the first time, excluding interferences originating from morphology and crystallinity related factors. The plain CdS nanowire arrays exhibited better field emission properties, a lower turn-on field, and a higher field enhancement factor than the ternary Cd1-xZnxS nanowire arrays, for which the lower resistivity of the CdS nanowires may have played an important role. An important parameter, the absolute field enhancement factor (beta(0)), to more intrinsically quantify the field emission performance of the plain US and ternary Cd1-xZnxS nanowires arrays was also studied. The values of beta(0) decreased with increasing Zn content in the ternary products. The high beta(0) values of the US based nanowire arrays, comparable to that of carbon nanotubes grown on silicon wafers, made these nanowire arrays a promising candidate material for high-performance field emitting devices.