Browsing by Author "Liu, Chih-Ting"

Now showing 1 - 10 of 10

Asymmetries in Porous Membranes: Fabrication of Anodic Aluminum Oxide Membranes with Double-Sized Nanopores and Controlled Surface Properties
(2019-06-13)
Liu, Chih-Ting
;
Lin, Yu-Liang
;
Chu, Chien-Wei
;
Chang, Chun-Wei
;
Chiu, Yu-Jing
Recently, anodic aluminum oxide (AAO) membranes with ordered and monodispersed nanopores have attracted significant attention because the pore sizes and lengths of the AAO membranes can be systematically controlled by changing the anodization parameters. Asymmetries of geometry, wettability, charge, and polarity in nanoporous AAO membranes are now highly desired for applications such as drug delivery, membrane filtration, and catalysis. Although the asymmetries in AAO membranes have been widely studied, AAO membranes whose nanopores simultaneously possess more than two asymmetric properties still need to be developed. In this work, we present a simple method to fabricate asymmetric AAO membranes by combining the post-treatments with the three-step anodization method. The asymmetries of the AAO membranes simultaneously possessing larger nanopores with higher hydrophobicity and smaller nanopores with lower hydrophobicity are characterized by scanning electron microscopy, water contact angle measurements, and energy-dispersive X-ray spectroscopy. Using the asymmetric AAO membranes, nanowires of polystyrene and poly(styreneb/ock-dimethylsiloxane) with double-sized diameters are also fabricated via the melt and solvent wetting methods, exhibiting that the AAO membranes with double-sized diameters can be used as the templates for generating double-sized polymer nanowires.
Bamboo-like nanostructures prepared using template-based wetting methods: Molecular arrangements of polyimide and carbon tubes in cylindrical nanopores
(2019-12-17)
Tu, Yi-Hsuan
;
Liu, Chih-Ting
;
Chu, Chien-Wei
;
He, Hung-Chieh
;
Chang, Chun-Wei
With excellent mechanical and physical properties, polyimides (PIs) possess diverse applications in different fields. PI-based materials can also be converted to carbon materials by high temperature carbonization processes. The fabrication and properties of PI-based nanomaterials and corresponding carbon nanomaterials, however, have been less investigated, especially the packing behaviors of the polymer chains. In this work, we study the fabrication and characterization of PI nanostructures using the solution wetting (SW) method and the solvent-annealing-induced nanowetting in templates (SAINT) method. Poly(amic acid) (PAA) tubes are first prepared using anodic aluminum oxide (AAO) membranes. After thermal imidization and carbonization processes, PI and carbon tubes can be obtained, respectively. Bamboo-like structures are also observed in the tubes, which can be attributed to the Marangoni effect induced by the gradient of the surface tensions during the solvent evaporation process. Moreover, the laser Raman micro-spectroscopy results show that the packing behaviors of the polymer chains in the nanostructures prepared by the SAINT method are better than those prepared by the SW method, indicating that the solvent annealing process can improve the chain packing while assisting the infiltration of polymer chains in the nanopores.
Curved block copolymer nanodiscs: structure transformations in cylindrical nanopores using the nonsolvent-assisted template wetting method
(2019-11-07)
Lin, Yu-Liang
;
Cheng, Ming-Hsiang
;
Chang, Chun-Wei
;
Chu, Chien-Wei
;
Liu, Chih-Ting
In this work, we study the structure transformations of cylinder-forming polystyrene-block-polydimethylsiloxane (PS31k-b-PDMS14.5k) confined in cylindrical nanopores. PS-b-PDMS nanotubes, nanospheres, and curved nanodiscs are ingeniously prepared by a facile template wetting strategy using anodic aluminum oxide (AAO) templates. Quantitative analyses of the structure transformations from nanospheres to curved nanodiscs are also conducted, showing that the lengths of the curved nanodiscs can be controlled by adjusting the annealing temperature and time. Furthermore, the PDMS domains of the nanostructures can be selectively etched using HF solutions, generating porous PS nanostructures. This work not only offers versatile routes to prepare block copolymer nanostructures with controlled shapes but also provides a deeper understanding of the structure transformation of block copolymers in confined geometries.
Dewetting of polymer thin films on modified curved surfaces: preparation of polymer nanoparticles with asymmetric shapes by anodic aluminum oxide templates
(2018-04-21)
Liu, Chih-Ting
;
Tsai, Chia-Chan
;
Chu, Chien-Wei
;
Chi, Mu-Huan
;
Chung, Pei-Yun
We study the dewetting behaviors of poly(methyl methacrylate) (PMMA) thin films coated in the cylindrical nanopores of anodic aluminum oxide (AAO) templates by thermal annealing. Self-assembled monolayers (SAMs) of n-octadecyltrichlorosilane (ODTS) are introduced to modify the pore surfaces of the AAO templates to induce the dewetting process. By using scanning electron microscopy (SEM), the dewetting-induced morphology transformation from the PMMA thin films to PMMA nanoparticles with asymmetric shapes can be observed. The sizes of the PMMA nanoparticles can be controlled by the original PMMA solution concentrations. The dewetting phenomena on the modified nanopores are explained by taking into account the excess intermolecular interaction free energy (AG). This work opens a new possibility for creating polymer nanoparticles with asymmetric shapes in confined geometries.
Dewetting of Swollen Poly(3-hexylthiophene) Films during Spin-Coating Processes: Implications for Device Fabrication
(2018-05-01)
Chung, Pei-Yun
;
Cheng, Ming-Hsiang
;
Tseng, Hsiao-Fan
;
Liu, Chih-Ting
;
Chiu, Tang-Yao
Poly(3-hexylthiophene) (P3HT) films have been usually prepared by spin-coating for the applications of electronic devices such as organic photovoltaic devices (OPV) and organic field-effect transistors (OFETs). The wetting and dewetting behaviors of the swollen P3HT films during the spin-coating processes, however, are still poorly understood. In this work, we investigate the dewetting behaviors of P3HT thin films and the formation of ring structures during the spin-coating process by controlling the spin rates and the solution temperatures. Quantitative studies of the dewetting phenomena are conducted by measuring the sizes of the ring structures of the dewetting patterns. It is observed that the sizes of the ring structures are larger at lower spin rates because of the longer dewetting times allowed during the spin-coating processes. More importantly, the dewetting behaviors of the P3HT films are discovered to be affected by the formation of the P3HT nanowhiskers (nanowires). This work offers a deeper understanding of the dewetting behaviors of swollen P3HT films during the spin-coating processes, which is crucial for the development of P3HT-based optoelectronic devices.
Fabrication of Electrospun Polymer Fibers with Nonspherical Cross-Sections Using a Nanopressing Technique
(2016-02)
Chen, Jiun-Tai
;
Kao, Yi-Huei
;
Kuo, Tyng-Yow
;
Liu, Chih-Ting
;
Chiu, Yu-Jing
The fabrication of electrospun polymer fibers is demonstrated with anisotropic cross-sections by applying a simple pressing method. Electrospun polystyrene or poly(methyl methacrylate) fibers are pressed by flat or patterned substrates while the samples are annealed at elevated temperatures. The shapes and morphologies of the pressed polymer fibers are controlled by the experimental conditions such as the pressing force, the pressing temperature, the pressing time, and the surface pattern of the substrate. At the same pressing force, the shape changes of the polymer fibers can be controlled by the pressing time. For shorter pressing times, the deformation process is dominated by the effect of pressing and fibers with barrel-shaped cross-sections can be generated. For longer pressing times, the effect of wetting becomes more important and fibers with dumbbell-shaped cross-sections can be obtained. Hierarchical polymer fibers with nanorods are fabricated by pressing the fibers with porous anodic aluminum oxide templates.
Hierarchical Polymer Structures Using Templates and the Modified Breath Figure Method
(2018-06-26)
Lee, Lin-Ruei
;
Liu, Chih-Ting
;
Tseng, Hsiao-Fan
;
Lin, Kuan-Ting
;
Chu, Chien-Wei
Hierarchical structures are commonly observed in nature and possess unique properties. The fabrication of hierarchical structures with well-controlled sizes in different length scales, however, is still a great challenge. To further understand the morphologies and properties of the hierarchical structures, here we present a novel strategy to prepare hierarchical polymer structures by combining the modified breath figure method and the template method. Poly(methyl methacrylate) (PMMA) honeycomb films with regular micropores are first prepared using the modified breath figure method by dipping PMMA films into mixtures of chloroform and methanol. The polymer chains on the honeycomb films are then annealed and wetted into the nanopores of anodic aluminum oxide templates via capillary forces, resulting in the formation of hierarchical polymer structures. The morphologies of the polymer structures, which can be controlled by the molecular weights of the polymers and the concentrations of the polymer solutions, are characterized by scanning electron microscopy. The surface wettabilities of the polymer structures are also examined by water contact angle measurements, and the hierarchical structures are observed to be more hydrophobic than the flat films and honeycomb films. This work not only provides a feasible approach to fabricate hierarchical polymer structures with controlled sizes but also gives a better understanding of the relationship between surface morphologies and properties.
On-Film Annealing: A Simple Method to Fabricate Heterogeneous Polymer Surfaces, Porous Films, and Hemispheres
(2015-07-01)
Chen, Jiun-Tai
;
Lee, Po-Hsi
;
Tseng, Hsiao-Fan
;
Chiu, Yu-Jing
;
Kao, Yi-Huei
Polymer microspheres have been widely investigated because of their applications in areas such as drug delivery, latex diagnostics, and affinity bioseparators. The effect of annealing on polymer microspheres, however, has been rarely studied. In this work, we demonstrate the morphology transformation of polystyrene (PS) microspheres annealed thermally on poly(methyl methacrylate) (PMMA) films. During the annealing process, the PS microspheres gradually sink into the PMMA films and transform into PS hemispheres, driven by the reduction of the surface and interfacial energies. The effect of the film thicknesses on the morphology transformation is also studied. In addition, porous PMMA films or PS hemispheres can be obtained by removing the PS or the PMMA domains of the polymer composites using cyclohexane or acetic acid, respectively.
Sequential Selective Solvent On-Film Annealing: Fabrication of Monolayers of Ordered Anisotropic Polymer Particles
(2020-08-05)
Tseng, Hsiao-Fan
;
Liang, Xiaobin
;
Liu, Chih-Ting
;
Chiu, Yu-Jing
;
Li, Jia-Wei
Although various strategies have been developed to prepare anisotropic polymeric particles, it remains challenging to fabricate monolayers of anisotropic polymeric particles, which can extend the applications of anisotropic particles. Here, we develop a novel and facile approach to fabricate monolayers of anisotropic polymeric particles. Monolayers of polystyrene (PS) microspheres with a mean diameter of 10 mu m are deposited on glass substrates coated with poly(methyl methacrylate) films, followed by sequential selective solvent on-film annealing processes. Monolayers of anisotropic polymeric particles, such as the snowman-like PS particles, are successfully fabricated. Such unique structures possess the long-range ordering of monolayers (the structure factor) and the anisotropic geometry of individual particles (the form factor). The nanomechanical properties of the PS particles are also characterized using atomic force microscopy force volume measurements, showing a decrease in the Young's moduli of the PS particles owing to the looser packing of the polymer chains. This work provides the most facile and versatile strategy by far to fabricate monolayers of ordered anisotropic polymeric particles, which arc inaccessible by other traditional means.
Sunny-Side-Up Egg-Shaped Structures: Surface Modification To Form Anisotropic Polymer Particles Driven by the Plateau-Rayleigh Instability as Fluorescence Manipulation Platforms
(2019-02-26)
Chiu, Yu-Jing
;
Liu, Chih-Ting
;
Weng, Chang-Ching
;
Chiu, Tang-Yao
;
Li, Jia-Wei
The Plateau-Rayleigh instability is a phenomenon driven by the reduction of the surface energies, in which a liquid cylinder transforms to a series of droplets with distinct spacing. This instability phenomenon is also applied broadly for the transformation of cylindrical materials to spherical particles in homogeneous environments. The demonstration of the instability in heterogeneous environments, however, has been less studied. Here, we study the Plateau-Rayleigh instability of electrospun polystyrene (PS)/poly(methyl methacrylate) (PMMA) core-shell fibers annealed on n-octadecyl-trichlorosilane (ODTS)-modified glass substrates with toluene vapors. After the annealing procedures, the PS/PMMA core-shell fibers transform to anisotropic sunny-side-up egg-shaped polymer structures, driven by the reduction of the total surface and interfacial energies. Quantitative analyses are performed on the sizes of the structures. Fluorescent fibers are also prepared by electrospinning and annealed on the ODTS-modified substrates, demonstrating the potential application as fluorescence manipulation platforms.