Browsing by Author "Ma, Chun-Hao"

Now showing 1 - 11 of 11

Enhanced Ferroelectric Functionality in Flexible Lead Zirconate Titanate Films with In Situ Substrate-Clamping Compensation
(1970-01-01)
Winestook, Rachel Onn
;
Saguy, Cecile
;
Ma, Chun-Hao
;
Chu, Ying-Hao
;
Ivry, Yachin
Much attention has recently been given to flexible and wearable integrated electronic devices, with a strong emphasis on real-time sensing, computing, and communication technologies. Thin ferroelectric films exhibit switchable polarization and strong electromechanical coupling, and hence are in widespread use in such technologies, albeit not when flexed. Effects of extrinsic strain on thin ferroelectric films are still unclear, mainly due to the lack of suitable experimental systems that allow cross structural-functional characterization with in situ straining. Moreover, although the effects of intrinsic strain on ferroelectric films, e.g., due to film-substrate lattice mismatch, have been extensively investigated, it is unclear how these effects are influenced by external strain. A method to strain thin films homogenously in situ is developed, allowing structural characterization as well as functional switching and piezorsponse measurements at the nanoscale, while retaining the sample under constant straining conditions. Using this method, thin films of PbZr0.2Ti0.8O3, which were grown on a flexible mica substrate, are strained to reduce substrate clamping effects and increase the tetragonality. Consequently, the domain stability is increased, the coercive field value is decreased, and imprint effects are reduced. This method also allows direct characterization of the relationship between the lattice parameters and nanoscale properties of other flexible materials.
Flexible ferroelectric element based on van der Waals heteroepitaxy
(2017-06-01)
Jiang, Jie
;
Bitla, Yugandhar
;
Huang, Chun-Wei
;
Thi Hien Do
;
Liu, Heng-Jui
We present a promising technology for nonvolatile flexible electronic devices: A direct fabrication of epitaxial lead zirconium titanate (PZT) on flexible mica substrate via van der Waals epitaxy. These single-crystalline flexible ferroelectric PZT films not only retain their performance, reliability, and thermal stability comparable to those on rigid counterparts in tests of nonvolatile memory elements but also exhibit remarkable mechanical properties with robust operation in bent states (bending radii down to 2.5 mm) and cycling tests (1000 times). This study marks the technological advancement toward realizing much-awaited flexible yet single-crystalline nonvolatile electronic devices for the design and development of flexible, lightweight, and next-generation smart devices with potential applications in electronics, robotics, automotive, health care, industrial, and military systems.
Graphene-Transition Metal Dichalcogenide Heterojunctions for Scalable and Low-Power Complementary Integrated Circuits
(2020-01-01)
Yeh, Chao-Hui
;
Liang, Zheng-Yong
;
Lin, Yung-Chang
;
Chen, Hsiang-Chieh
;
Fan, Ta
The most pressing barrier for the development of advanced electronics based on two-dimensional (2D) layered semiconductors stems from the lack of site-selective synthesis of complementary n- and p-channels with low contact resistance. Here, we report an in-plane epitaxial route for the growth of interlaced 2D semiconductor monolayers using chemical vapor deposition with a gas-confined scheme, in which patterned graphene (Gr) serves as a guiding template for site-selective growth of Gr-WS2-Gr and Gr-WSe2-Gr heterostructures. The Gr/2D semiconductor interface exhibits a transparent contact with a nearly ideal pinning factor of 0.95 for the n-channel WS2 and 0.92 for the p-channel WSe2. The effective depinning of the Fermi level gives an ultralow contact resistance of 0.75 and 1.20 k Omega.mu m for WS2 and WSe2, respectively. Integrated logic circuits including inverter, NAND gate, static random access memory, and five-stage ring oscillator are constructed using the complementary Gr-WS2-Gr-WSe2-Gr heterojunctions as a fundamental building block, featuring the prominent performance metrics of high operation frequency (>0.2 GHz), low-power consumption, large noise margins, and high operational stability. The technology presented here provides a speculative look at the electronic circuitry built on atomic-scale semiconductors in the near future.
Heteroepitaxy of Fe3O4/Muscovite: A New Perspective for Flexible Spintronics
(2016-12-14)
Wu, Ping-Chun
;
Chen, Ping-Fan
;
Thi Hien Do
;
Hsieh, Ying-Hui
;
Ma, Chun-Hao
Spintronics has captured a lot of attention since it was proposed. It has been triggering numerous research groups to make their efforts on pursuing spin-related electronic devices. Recently, flexible and wearable devices are in a high demand due to their outstanding potential in practical applications. In order to introduce spintronics into the realm of flexible devices, we demonstrate that it is feasible to grow epitaxial Fe3O4 film, a promising candidate for realizing spintronic devices based on tunneling magnetoresistance, on flexible muscovite. In this study, the heteroepitaxy of Fe3O4/muscovite is characterized by X-ray diffraction, high-resolution transmission electron microscopy, and Raman spectroscopy. The chemical composition and magnetic feature are investigated by a combination of X-ray photoelectron spectroscopy and X-ray magnetic circular dichroism. The electrical and magnetic properties are examined to show the preservation of the primitive properties of Fe3O4. Furthermore, various bending tests are performed to show the tunability of functionalities and to confirm that the heterostructures retain the physical properties under repeated cycles. These results illustrate that the Fe3O4/muscovite heterostructure can be a potential candidate for the applications in flexible spintronics.
Layered MoS2 grown on c-sapphire by pulsed laser deposition
(2015-03-01)
Ho, Yen-Teng
;
Ma, Chun-Hao
;
Luong, Tien-Tung
;
Wei, Lin-Lung
;
Yen, Tzu-Chun
Layered growth of molybdenum disulphide (MoS2) was successfully achieved by pulsed laser deposition (PLD) method on c-plane sapphire substrate. Growth of monolayer to a few monolayer MoS2, dependent on the pulsed number of excimer laser in PLD is demonstrated, indicating the promising controllability of layer growth. Among the samples with various pulse number deposition, the frequency difference (A1gE12g) in Raman analysis of the 70 pulse sample is estimated as 20.11 cm(1), suggesting a monolayer MoS2 was obtained. Two-dimensional (2D) layer growth of MoS2 is confirmed by the streaky reflection high energy electron diffraction (RHEED) patterns during growth and the cross-sectional view of transmission electron microscopy (TEM). The in-plane relationship, (0006) sapphire//(0002) MoS2 and inline image sapphire//inline imageMoS(2) is determined. The results imply that PLD is suitable for layered MoS2 growth. Additionally, the oxide states of Mo 3d core level spectra of PLD grown MoS2, analysed by X-ray photoelectron spectroscopy (XPS), can be effectively reduced by adopting a post sulfurization process. (C) 2015 WILEY-VCH Verlag GmbH &Co. KGaA, Weinheim
Oxide Heteroepitaxy for Flexible Optoelectronics
(2016-11-30)
Bitla, Yugandhar
;
Chen, Ching
;
Lee, Hsien-Chang
;
Do, Thi Hien
;
Ma, Chun-Hao
The emerging technological demands for flexible and transparent electronic devices have compelled researchers to look beyond the current silicon-based electronics. However, fabrication of devices on conventional flexible substrates with superior performance are constrained by the trade-off between processing temperature and device performance. Here, we propose an alternative strategy to circumvent this issue via the heteroepitaxial growth of transparent conducting oxides (TCO) on the flexible mica substrate with performance comparable to that of their rigid counterparts. With the examples of ITO and AZO as a case study, a strong emphasis is laid upon the growth of flexible yet epitaxial TCO relying muscovite\'s superior properties compared to those of conventional flexible substrates and its compatibility with the present fabrication methods. Besides excellent optoelectro-mechanical properties, an additional functionality of high-temperature stability, normally lacking in the current state-of-the-art transparent flexitronics, is provided by these heterostructures. These epitaxial TCO electrodes with good chemical and thermal stabilities as well as mechanical durability can significantly contribute to the field of flexible, light-weight, and portable smart electronics.
Pulsed laser deposition of complex oxide heteroepitaxy
(2019-08-01)
Huang, Yen-Lin
;
Liu, Heng-Jui
;
Ma, Chun-Hao
;
Yu, Pu
;
Chu, Ying-Hao
The modern studies of complex oxides have been mainly driven by the development of advanced growth and characterization techniques, which provide researchers unprecedented access to new insights and functionalities of these materials. Epitaxial growth of thin films and related architectures offers a pathway to the discovery and stabilization of a wide spectrum of new possibilities in conjunction with the availability of high quality materials that produced with larger lateral sizes and being grown constrainedly. Compared with conventional growth techniques, such as sputtering, spin coating, sol-gel processes, metal-organic chemical vapor deposition, molecular beam epitaxy and so on, no other single advance in the creation of oxide materials has had as pronounced an impact as pulsed laser deposition. In pursuit of the fruitful functionalities and exciting physical phenomena among complex oxides, pulsed laser deposition technique has played an important role to fulfill the flurry of complex oxides in recent decades. In this article, we focus on the details of the growth of epitaxial oxide thin films and the related polymorphs, as well as recent advances in control of the oxide heteroepitaxy via pulsed laser deposition.
Scalable van der Waals Heterojunctions for High-Performance Photodetectors
(2017-10-18)
Yeh, Chao-Hui
;
Liang, Zheng-Yong
;
Lin, Yung-Chang
;
Wu, Tien-Lin
;
Fan, Ta
Atomically thin two-dimensional (2D) materials have attracted increasing attention for optoelectronic applications in view of their compact, ultrathin, flexible, and superior photosensing characteristics. Yet, scalable growth of 2D heterostructures and the fabrication of integrable optoelectronic devices remain unaddressed. Here, we show a scalable formation of 2D stacks and the fabrication of phototransistor arrays, with each photosensing element made of a graphene-WS2 vertical heterojunction and individually addressable by a local top gate. The constituent layers in the heterojunction are grown using chemical vapor deposition in combination with sulfurization, providing a clean junction interface and processing scalability. The aluminum top gate possesses a self-limiting oxide around the gate structure, allowing for a self-aligned deposition of drain/source contacts to reduce the access (litigated) channel regions and to boost the device performance. The generated photo current, inherently restricted by the limited optical absorption cross section of 2D materials, can be enhanced by 2 orders of magnitude by top gating. The resulting photoresponsivity can reach 4.0 A/W under an illumination power density of 0.5 mW/cm(2), and the dark current can be minimized to few picoamperes, yielding a low noise-equivalent power of 2.5 x 10(-16) W/Hz(1/2). Tailoring 2D heterostacks as well as the device architecture moves the applications of 2D-based optoelectronic devices one big step forward.
Transparent Antiradiative Ferroelectric Heterostructure Based on Flexible Oxide Heteroepitaxy
(2018-09-12)
Ma, Chun-Hao
;
Jiang, Jie
;
Shao, Pao-Wen
;
Peng, Qiang-Xiang
;
Huang, Chun-Wei
In the era of Internet of Things, the demand for flexible and transparent electronic devices has shifted to the forefront of materials science research. However, the radiation damage to key performance of transparent devices under radiative environment remains as a critical issue. Here, we present a promising technology for nonvolatile transparent electronic devices based on flexible oxide heteroepitaxy. A direct fabrication of epitaxial lead lanthanum zirconate titanate on transparent flexible mica substrate with indium tin oxide electrodes is presented. The transparent flexible ferroelectric heterostructures not only retain their superior performance, thermal stability, reliability, and mechanical durability, but also exhibit remarkably robust properties against to a strong radiation exposure. Our study demonstrates an extraordinary concept to realize transparent flexible nonvolatile electronic devices for the design and development of next-generation smart devices with potential application in electronics, automotive, aerospace, and nuclear systems.
van der Waal Epitaxy of Flexible and Transparent VO2 Film on Muscovite
(2016-06-14)
Li, Chien-I
;
Lin, Jheng-Cyuan
;
Liu, Heng-Jui
;
Chu, Ming-Wen
;
Chen, Hsiao-Wen
Vanadium dioxide (VO2) is a compelling candidate for next-generation electronics beyond conventional silicon-based devices due to the exhibition of a sharp metal insulator transition. In this study, in order to realize functional VO2 film for flexible electronics, the growth of VO2 film directly on a transparent and flexible muscovite via van der Waals epitaxy is established. The heteroepitaxy and structural transition of VO2 films on muscovite are examined by a combination of high resolution X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. The unique metal insulator transition of VO2 is further revealed with a change in electrical resistance over 10(3) and a more than 50% variation of optical transmittance. Furthermore, due to the nature of muscovite, the VO2/muscovite heterostructure possesses superior flexibility and optical transparence. The approach developed in this study paves an intriguing way to fabricate functional VO2 film for the applications in flexible electronics.
Van der Waals epitaxy of functional MoO2 film on mica for flexible electronics
(2016-06-20)
Ma, Chun-Hao
;
Lin, Jheng-Cyuan
;
Liu, Heng-Jui
;
Thi Hien Do
;
Zhu, Yuan-Min
Flexible electronics have a great potential to impact consumer electronics and with that our daily life. Currently, no direct growth of epitaxial functional oxides on commercially available flexible substrates is possible. In this study, in order to address this challenge, muscovite, a common layered oxide, is used as a flexible substrate that is chemically similar to typical functional oxides. We fabricated epitaxial MoO2 films on muscovite via pulsed laser deposition technique. A combination of X-ray diffraction and transmission electron microscopy confirms van der Waals epitaxy of the heterostructures. The electrical transport properties of MoO2 films are similar to those of the bulk. Flexible or free-standing MoO2 thin film can be obtained and serve as a template to integrate additional functional oxide layers. Our study demonstrates a remarkable concept to create flexible electronics based on functional oxides. Published by AIP Publishing.