Browsing by Author "Shen, Hsin-Hsin"

Now showing 1 - 5 of 5

Augmentation of DMLS Biomimetic Dental Implants with Weight-Bearing Strut to Balance of Biologic and Mechanical Demands: From Bench to Animal
(2019-01-01)
Chang, Jenny Zwei-Chieng
;
Tsai, Pei-I
;
Kuo, Mark Yen-Ping
;
Sun, Jui-Sheng
;
Chen, San-Yuan
A mismatch of elastic modulus values could result in undesirable bone resorption around the dental implant. The objective of this study was to optimize direct metal laser sintering (DMLS)-manufactured Ti6Al4V dental implants' design, minimize elastic mismatch, allow for maximal bone ingrowth, and improve long-term fixation of the implant. In this study, DMLS dental implants with different morphological characteristics were fabricated. Three-point bending, torsional, and stability tests were performed to compare the mechanical properties of different designs. Improvement of the weaker design was attempted by augmentation with a longitudinal 3D-printed strut. The osseointegrative properties were evaluated. The results showed that the increase in porosity decreased the mechanical properties, while augmentation with a longitudinal weight-bearing strut can improve mechanical strength. Maximal alkaline phosphatase gene expression of MG63 cells attained on 60% porosity Ti6Al4V discs. In vivo experiments showed good incorporation of bone into the porous scaffolds of the DMLS dental implant, resulting in a higher pull-out strength. In summary, we introduced a new design concept by augmenting the implant with a longitudinal weight-bearing strut to achieve the ideal combination of high strength and low elastic modulus; our results showed that there is a chance to reach the balance of both biologic and mechanical demands.
Magnetic hyperthermia enhance the treatment efficacy of peri-implant osteomyelitis
(2017-07-25)
Fang, Chih-Hsiang
;
Tsai, Pei-I
;
Huang, Shu-Wei
;
Sun, Jui-Sheng
;
Chang, Jenny Zwei-Chieng
Background: When bacteria colony persist within a biofilm, suitable drugs are not yet available for the eradication of biofilm-producing bacteria. The aim of this study is to study the effect of magnetic nano-particles-induced hyperthermia on destroying biofilm and promoting bactericidal effects of antibiotics in the treatment of osteomyelitis. Methods: Sixty 12-weeks-old male Wistar rats were used. A metallic 18G needle was implanted into the bone marrow cavity of distal femur after the injection of Methicillin-sensitive Staphylococcus aureus (MSSA). All animals were divided into 5 different treatment modalities. The microbiological evaluation, scanning electron microscope examination, radiographic examination and then micro-CT evaluation of peri-implant bone resorption were analyzed. Results: The pathomorphological characteristics of biofilm formation were completed after 40-days induction of osteomyelitis. The inserted implants can be heated upto 75 degrees C by magnetic heating without any significant thermal damage on the surrounding tissue. We also demonstrated that systemic administration of vancomycin [VC (i.m.)] could not eradicate the bacteria; but, local administration of vancomycin into the femoral canal and the presence of magnetic nanoparticles hyperthermia did enhance the eradication of bacteria in a biofilm-based colony. In these two groups, the percent bone volume (BV/TV: %) was significantly higher than that of the positive control. Conclusions: For the treatment of chronic osteomyelitis, we developed a new modality to improve antibiotic efficacy; the protection effect of biofilms on bacteria could be destroyed by magnetic nanoparticles-induced hyperthermia and therapeutic effect of systemic antibiotics could be enhanced.
Prokaryotic expression, refolding, and purification of functional human vascular endothelial growth factor isoform 165: Purification procedures and refolding conditions revisited
(2011-03-01)
Lee, I-Liang
;
Li, Pei-Shan
;
Yu, Wei-Lin
;
Shen, Hsin-Hsin
;
生物科技學系
Human vascular endothelial growth factor isoform 165 (VEGF165) is the first known member belonging to the VEGF protein family that plays a critical role in new blood vessel formation in vivo. This study presents a new protocol with optimized conditions for rapidly producing untagged recombinant and biological active human VEGF165 (rhVEGF165) using Escherichia coli cells. Protein was isolated from inclusion bodies, purified by gel filtration and ion exchange chromatography, and subjected to protein refolding and renaturation. The biological activity of rhVEGF165 is comparable with VEFG from eukaryotic source according to human umbilical vein endothelial cells (HUVEC) proliferation assay. Therefore, the present procedures provide a fast and easy way to produce this therapeutic protein. (C) 2010 Published by Elsevier Inc.
Synthesis and interfacing of biocompatible iron oxide nanoparticles through the ferroxidase activity of Helicobacter Pylori ferritin
(2012-12-01)
Lee, I-Liang
;
Li, Pei-Shan
;
Yu, Wei-Lin
;
Shen, Hsin-Hsin
;
生物科技學系
Ferritin is an iron storage protein that is often used to coat metallic nanoparticles, such as iron oxide nanoparticles (IONPs). However, the synthesis and biocompatibility of ferritin-coated IONPs remain unclear. Therefore, this study reports the synthesis of a ferritin gene cloned and expressed from Helicobacter pylori (HPFn). The ferroxidase activity of the synthase HPFn was used for the de novo synthesis of HPFn-coated IONPs under mild conditions. Gel filtration chromatography and transmission electron microscopy analyses demonstrated that the core-shell structure of both the 5.0 nm IONP nanocore and the 12.4 nm HPFn shell were correctly assembled. The cellular uptake of mouse macrophage cells (RAW 264.7 cells) has shown that only a few HPFn-coated IONPs (3%) were taken up after 24 h of incubation. This study compares the biocompatibility of HPFn-coated IONPs, superparamagnetic iron oxide nanoparticles (SPIOs) and ferric salt (ferric ammonium citrate) in respect to cell growth inhibition, reactive oxygen species generation and pro-inflammatory cytokine TNF-alpha release. Assessment results showed that the responses elicited by HPFn-coated IONPs were similar to those elicited by SPIO treatment but milder than those elicited by ferric salt treatment. This accounts for the notion that ferritin-coated IONPs are biocompatible iron agents. These findings show that the ferroxidase activity of ferritin can be used to synthesize biocompatible IONPs. The favorable properties of HPFn-coated IONPs suggest that they can be used as a non-macrophage contrast agent through further surface conjugation.
Three-Dimensional Printed Porous Titanium Screw with Bioactive Surface Modification for Bone-Tendon Healing: A Rabbit Animal Model
(2020-05-01)
Huang, Yu-Min
;
Huang, Chih-Chieh
;
Tsai, Pei-I
;
Yang, Kuo-Yi
;
Huang, Shin-I
The interference screw fixation method is used to secure a graft in the tibial tunnel during anterior cruciate ligament reconstruction surgery. However, several complications have been reported, such as biodegradable screw breakage, inflammatory or foreign body reaction, tunnel enlargement, and delayed graft healing. Using additive manufacturing (AM) technology, we developed a titanium alloy (Ti6Al4V) interference screw with chemically calcium phosphate surface modification technology to improve bone integration in the tibial tunnel. After chemical and heat treatment, the titanium screw formed a dense apatite layer on the metal surface in simulated body fluid. Twenty-seven New Zealand white rabbits were randomly divided into control and additive manufactured (AMD) screw groups. The long digital extensor tendon was detached and translated into a tibial plateau tunnel (diameter: 2.0 mm) and transfixed with an interference screw while the paw was in dorsiflexion. Biomechanical analyses, histological analyses, and an imaging study were performed at 1, 3, and 6 months. The biomechanical test showed that the ultimate pull-out load failure was significantly higher in the AMD screw group in all tested periods. Micro-computed tomography analyses revealed early woven bone formation in the AMD screw group at 1 and 3 months. In conclusion, AMD screws with bioactive surface modification improved bone ingrowth and enhanced biomechanical performance in a rabbit model.