Browsing by Author "Shih, Chih-Cheng"

Now showing 1 - 20 of 26

A Dual-Gate InGaZnO4-Based Thin-Film Transistor for High-Sensitivity UV Detection
(2019-08-01)
Chen, Po-Hsun
;
Tsao, Yu-Ching
;
Chien, Yu-Chieh
;
Chiang, Hsiao-Cheng
;
Chen, Hua-Mao
UV-sensing devices have received significant recent attention for applications in areas such as human health, fire detection, and optical communication. One key factor for product commercialization is determining the optimal materials that allow for integration of excellent UV-sensing properties with compatibility with industrial fabrication processes. However, current UV sensors often fail to achieve this due to either mismatched materials or a device that must be excessively large in order to produce enough photocurrent for UV detection. The UV-light-sensing properties of an amorphous InGaZnO4 (IGZO) thin-film transistor with a dual-gate structure and relatively small device size (width/length = 50 mu m/10 mu m) that achieves high sensitivity through a threshold-voltage-(V-th)-adjustment method is proposed. Comparing the drain currents under UV exposure to those under darkened conditions indicates that the ratio between the photoinduced and dark current reaches 10(6). Furthermore, the UV sensitivity of the dual-gate transistors can be adjusted by varying the bottom gate voltage, with each pixel of the sensor then being read out separately via scan line pulses. This allows the dual-gate a-IGZO transistor to be used for high-performance UV sensing while being effectively integrated in display applications.
Analyzing Electric Field Effect by Applying an Ultra-Short Time Pulse Condition in Hafnium Oxide-Based RRAM
(2018-08-01)
Wu, Cheng-Hsien
;
Lin, Shih-Kai
;
Pan, Chih-Hung
;
Chen, Po-Hsun
;
Lin, Wen-Yan
In this letter, we determine the importance of the electrical field distribution and strength during the switching process by demonstrating different trends in the degree of reset and the reset pulse time. In general, a longer reset pulse time results in a higher reset energy; a higher reset energy leads to a higher degree of reset, which we obtainedby applying different width square waves. But quite notably, the opposite result was obtained using triangle waves, where a higher degree of reset occurred with a shorter rising time and lower reset energy. We believe that this is due to the electric field effect: if the voltage rises faster than the filament oxidation, the device can produce a larger effective electric field and a higher resistance in the reset process. To further investigate the mechanism, the procedure of the reset process was analyzed in detail, and COMSOL simulation is also carried out for confirmation.
Characteristics of hafnium oxide resistance random access memory with different setting compliance current
(2013-10-14)
Su, Yu-Ting
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Zhang, Rui
In this Letter, the characteristics of set process of hafnium oxide based resistance random access memory are investigated by different set processes with increasing compliance current. Through current fitting, carrier conduction mechanism of low resistance state changes from hopping to surface scattering and finally to ohmic conduction with the increase of setting compliance current. Experimental data of current-voltage measurement under successive increasing temperature confirms the conduction mechanism transition. A model of filament growth is eventually proposed in a way by merging discrete metal precipitates and electrical field simulation by COMSOL Multiphysics further clarifies the properties of filament growth process. (C) 2013 AIP Publishing LLC.
Conduction Mechanism and Improved Endurance in HfO2-Based RRAM with Nitridation Treatment
(2017-10-26)
Yuan, Fang-Yuan
;
Deng, Ning
;
Shih, Chih-Cheng
;
Tseng, Yi-Ting
;
Chang, Ting-Chang
A nitridation treatment technology with a urea/ammonia complex nitrogen source improved resistive switching property in HfO2-based resistive random access memory (RRAM). The nitridation treatment produced a high performance and reliable device which results in superior endurance (more than 10(9) cycles) and a self-compliance effect. Thus, the current conduction mechanism changed due to defect passivation by nitrogen atoms in the HfO2 thin film. At a high resistance state (HRS), it transferred to Schottky emission from Poole-Frenkel in HfO2-based RRAM. At low resistance state (LRS), the current conduction mechanism was space charge limited current (SCLC) after the nitridation treatment, which suggests that the nitrogen atoms form Hf-N-Ox vacancy clusters (V-o(+)) which limit electron movement through the switching layer.
Electrical conduction mechanism of Zn:SiOx resistance random access memory with supercritical CO2 fluid process
(2013-08-19)
Chang, Kuan-Chang
;
Tsai, Tsung-Ming
;
Zhang, Rui
;
Chang, Ting-Chang
;
Chen, Kai-Huang
In this study, the electrical conduction mechanism of Zn:SiOx resistance random access memory (RRAM) treated with supercritical CO2 fluid (SCCO2) process was investigated by low temperature measurement. The current of low resistance state for current-voltage curves in SCCO2-treated and untreated Zn:SiOx RRAM were measured and compared under a low temperature range from 100K to 298 K. The electrical conduction mechanisms of hopping conduction and metal-like behaviors in SCCO2-treated and untreated Zn:SiOx RRAM were discussed, respectively. Finally, the electrical conduction mechanism was analyzed and verified by the chemical composition and bonding intensity of XPS analyses. (C) 2013 AIP Publishing LLC.
Endurance Improvement Technology With Nitrogen Implanted in the Interface of WSiOx Resistance Switching Device
(2013-07-01)
Syu, Yong-En
;
Zhang, Rui
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
Incorporation of nitrogen as an oxygen-confining layer in the resistance switching reaction region is investigated to improve the reliability of resistance random access memory (RRAM). The switching mechanism can be attributed to the formation and rupture of conduction filaments. A compatible WSiON (around 5 nm) layer is introduced at the interface of tungsten silicon oxide (WSiOx) and TiN electrode to prevent the randomly diffusing oxygen ions surpassing the storage region of the WSiON layer. The double-layer WSiOx/WSiON memory structure would enhance the endurance over 100 times so as to better confirm the WSiOx RRAM application of nonvolatile memory.
Enhanced electrical behavior from the galvanic effect in Ag-Cu alloy electrode conductive bridging resistive switching memory
(2018-07-30)
Tseng, Yi-Ting
;
Chen, I-Chieh
;
Chang, Ting-Chang
;
Huang, J. C.
;
Shih, Chih-Cheng
In this study, an Ag-Cu alloy was chosen as the electrode in conductive bridging random access memory (CBRAM), with results indicating a significant decrease in forming voltage. In addition, resistive switching characteristics as well as a retention test indicated better stability and a resistive switching window of at least an order, The switching time of the Ag-Cu alloy CBRAM is shorter than that of both Ag and Cu electrode CBRAMs under fast current-voltage (fast I-V). The experimental result indicated that the mechanism was dominated by the galvanic effect. Active atoms (Ag) captured electrons of inactive atoms (Cu) and generated metallic ions (Cu ions) in the alloy electrode, Cu ions drifted into the insulator and generated a conductive path when applying voltage bias, The use of this alloy as an electrode in CBRAM can significantly decrease forming voltage and enhance CBRAM characteristics. Published by AIP Publishing.
Enhancement of Surface Chemical and Physical Properties of Germanium-Sulfur Thin Film Using a Water-Supplemented Carbon Dioxide Supercritical Fluid Treatment Technique
(2018-11-09)
Yang, Chih-Cheng
;
Chen, Po-Hsun
;
Shih, Chih-Cheng
;
Wang, Ming-Hui
;
Tsai, Tsung-Ming
In this study, an oxidation treatment technique suitable for the material and electronic device applications proceeding at low temperature (only 80 degrees C) and high pressure (3000 psi) utilizing a carbon dioxide (CO2) supercritical fluid (SCF), also known as scCO(2), which is supplemented with water molecules, is reported. To demonstrate the possible effects on material and devices for the proposed SCF treatment, an amorphous germanium-sulfur (GeS) thin film and a GeS-based resistance random access memory (RRAM) device are prepared. After the SCF treatment, electrical measurements confirm that the GeS-based RRAM device exhibits a lower forming voltage, more stable resistance switching characteristics, and higher concentration distributions of high and low resistance states when compared to the device without SCF treatment. As for the material effects, both chemical and physical properties are examined based on material analyses results. It is concluded that the original amorphous GeS thin film transforms to a polycrystallized GeO film, confirmed by a reaction model for the SCF treatment illustrating possible oxidation and crystallization effects induced by this SCF treatment. This water-enhanced scCO(2) SCF treatment technique, thus, shows its capability as a feasible synthetic method for material modification as well as suitability for device level applications.
High performance of graphene oxide-doped silicon oxide-based resistance random access memory
(2013-11-21)
Zhang, Rui
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chen, Kai-Huang
In this letter, a double active layer (Zr:SiO (x) /C:SiO (x) ) resistive switching memory device with outstanding performance is presented. Through current fitting, hopping conduction mechanism is found in both high-resistance state (HRS) and low-resistance state (LRS) of double active layer RRAM devices. By analyzing Raman and FTIR spectra, we observed that graphene oxide exists in C:SiO (x) layer. Compared with single Zr:SiO (x) layer structure, Zr:SiO (x) /C:SiO (x) structure has superior performance, including low operating current, improved uniformity in both set and reset processes, and satisfactory endurance characteristics, all of which are attributed to the double-layer structure and the existence of graphene oxide flakes formed by the sputter process.
Hopping conduction distance dependent activation energy characteristics of Zn:SiO2 resistance random access memory devices
(2013-04-01)
Chen, Kai-Huang
;
Zhang, Rui
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
In this study, the hopping conduction distance variation of Zn:SiO2 resistance random access memory (RRAM) devices with different operating compliance currents was discussed and verified. To investigate and determine the hopping conduction distance dependent activation energy characteristics, the Arrhenius plot of low resistance state of Zn:SiO2 RRAM devices was applied, from which we proposed carrier conduction model. With the increase of current compliance, more metal ions would accumulate to form precipitates with larger diameter, which in turn resulted in the shortening of hopping distance. Because of shorter hopping distance, activation energy for carrier hopping would decrease. (C) 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4799655]
Hopping Effect of Hydrogen-Doped Silicon Oxide Insert RRAM by Supercritical CO2 Fluid Treatment
(2013-05-01)
Chang, Kuan-Chang
;
Pan, Chih-Hung
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Zhang, Rui
In this letter, we introduced hydrogen ions into titanium metal doped into SiO2 thin film as the insulator of resistive random access memory (RRAM) by supercritical carbon dioxide (SCCO)(2) fluid treatment. After treatment, low resistance state split in to two states, we find the insert RRAM, which means it has an operating polarity opposite from normal RRAM. The difference of the insert RRAM is owing to the resistive switching dominated by hydrogen ions, dissociated from OH bond, which was not by oxygen ions as usual. The current conduction mechanism of insert RRAM was hopping conduction due to the metal titanium reduction reaction through SCCO2.
Improvement of Resistive Switching Characteristics in Zinc Oxide-Based Resistive Random Access Memory by Ammoniation Annealing
(2020-03-01)
Wu, Pei-Yu
;
Zheng, Hao-Xuan
;
Shih, Chih-Cheng
;
Chang, Ting-Chang
;
Chen, Wei-Jang
In this experiment, the electrical performance of zinc oxide based-resistive random access memory (RRAM) is successfully improved by using annealing in ammonia hydroxide solution at low-temperature and high pressure to complete ammonium-doped ZnO based-RRAM. The results of material analysis indicate that using CO2 as ammonia hydroxide carrier during the annealing process leads to the reduction in dangling bond density. This can be clearly observed in the decrease in breakdown voltage during the forming process and a lower operating current during operation. Furthermore, in this ammonium-doped ZnO based-RRAM, we study the molecular doping of NH3 in ZnO, where the endurance and retention properties are improved as well. These improvements can be attributed to the higher concentration of nitrogen in the switching layer, which can effectively control the active oxygen ions during the operation process.
Indium Diffusion Behavior and Application in HfO2-Based Conductive Bridge Random Access Memory
(1970-01-01)
Zheng, Hao-Xuan
;
Shih, Chih-Cheng
;
Chang, Ting-Chang
;
Shih, Lin-Yi
;
Shih, Yao-Kai
This study proposes the design of conductive bridge random access memory (CBRAM) using an indium electrode, which diffuses into hafnium oxide. The device is found to exhibit good operating characteristics, maintaining a large operation window, low set and reset voltages, and advantageous operation speed, thereby reducing operating power consumption. Electrical experiments, transmission electron microscopy, and energy-dispersive spectroscopy confirm that the device exhibits the characteristics of a CBRAM device. In addition, due to the large operation window of this In electrode device, a combination of two of these CBRAM can act as a complementary resistive switching (CRS) device with a large memory window.
Inert Pt electrode switching mechanism after controlled polarity-forming process in In2O3-based resistive random access memory
(2017-09-01)
Wu, Cheng-Hsien
;
Pan, Chih-Hung
;
Chen, Po-Hsun
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
In this study, we demonstrate a forming technique that enables us to control whether the switching layer of a Pt/In2O3/TiN device is near the Pt electrode or the TiN electrode. This means that In2O3-based resistive random access memory (RRAM) can be switched at either the active or inert electrode. The resistive switching current-voltage (I-V) curves for both electrodes exhibit stable memory windows. Through material and electrical analyses, we found that the reason for switching at the inert electrode is the oxygen-vacancy-rich characteristic of In2O3. Finally, a physical model is proposed to explain this phenomenon. (C) 2017 The Japan Society of Applied Physics
Investigation of the Capacitance-Voltage Electrical Characteristics of Thin-Film Transistors Caused by Hydrogen Diffusion under Negative Bias Stress in a Moist Environment
(2019-10-30)
Chen, Hong-Chih
;
Kuo, Chuan-Wei
;
Chang, Ting-Chang
;
Lai, Wei-Chih
;
Chen, Po-Hsun
In this study, the impact of moisture on the electrical characteristics of an amorphous In-Ga-Zn-O thin-film transistor (a-IGZO TFT) was investigated. In commercial applications of such TFTs, high stability and quality performance in humid environments are essential. During TFT operation under ambient moisture, the electrolysis of water molecules occurs via the tip electric field effect. Hydrogen diffuses from the etch-stop layer or back-channel into the main channel under a negative electric field. The hydrogen atoms act as shallow donors (which causes the carrier concentration in the channel to rise), causing the threshold voltage (V-TH) to shift in the negative direction. Hydrogen diffusion from the overlap of the source/drain and gate electrodes to the channel center caused by the tip electric field induces a significant barrier lowering and V-TH shifts in a short-channel device. However, under negative bias stress (NBS) in ambient moisture, the negative V-TH shift is more obvious in short- than in long-channel devices, indicating suppressed hydrogen diffusion in long-channel devices. This is attributed to the electrolysis of water by the tip electric field at the source, drain, and gate electrodes, which causes hydrogen to diffuse to the center of the channel. Here, a novel physical model of the capacitance-voltage (C-V) electrical property changes under ambient moisture is proposed, based on the early appearance of abnormalities in the C-V measurements. The electrolysis of water caused by the tip electric field and electrical abnormalities caused by hydrogen diffusion into the a-IGZO active layer are explained by this model. A secondary-ion mass spectrometry analysis shows that hydrogen content in the channel generally increases under NBS in ambient moisture. The degradation behavior due to moisture in a-IGZO is clarified. Thus, inhibiting the tip electric field may benefit future flexible-display and gas-sensing applications.
Investigation of the forming process under UV illumination in HfO2-based resistance random access memory with a transparent electrode
(2020-01-09)
Huang, Wei-Chen
;
Huang, Shin-Ping
;
Chen, Po-Hsun
;
Chen, Min-Chen
;
Chang, Ting-Chang
Traditionally, metal is used for the top electrode (TE) in HfO2-based resistance random access memory. When transparent indium-tin-oxide (ITO) is used as the TE, different forming processes, including lower forming voltages and higher forming currents, are exhibited. This work investigates the forming process with such a transparent TE under UV illumination. In addition, different TE thicknesses and device cell sizes are also investigated to confirm the results. Finally, a possible conduction model is provided to explain the mechanisms under UV-light illumination for the transparent TE during the forming process.
Mechanism of power consumption inhibitive multi-layer Zn:SiO2/SiO2 structure resistance random access memory
(2013-12-21)
Zhang, Rui
;
Tsai, Tsung-Ming
;
Chang, Ting-Chang
;
Chang, Kuan-Chang
;
Chen, Kai-Huang
In this paper, multi-layer Zn:SiO2/SiO2 structure is introduced to reduce the operation power consumption of resistive random access memory (RRAM) device by modifying the filament formation process. And the configuration of multi-layer Zn:SiO2/SiO2 structure is confirmed and demonstrated by auger electron spectrum. Material analysis together with conduction current fitting is applied to qualitatively evaluate the carrier conduction mechanism on both low resistance state and high resistance state. Finally, single layer and multilayer conduction models are proposed, respectively, to clarify the corresponding conduction characteristics of two types of RRAM devices. (C) 2013 AIP Publishing LLC.
Obtaining Lower Forming Voltage and Self-Compliance Current by Using a Nitride Gas/Indium-Tin Oxide Insulator in Resistive Random Access Memory
(2016-12)
Chen, Po-Hsun
;
Chang, Ting-Chang
;
Chang, Kuan-Chang
;
Tsai, Tsung-Ming
;
Pan, Chih-Hung
This paper investigates the characteristics of applying indium-tin oxide (ITO) with and without nitride gas (N-2) as the insulator in resistive random access memory (RRAM). After cosputtering an ITO target with N-2 as the insulator and capping the same ITO material as the top electrode, the device exhibits rectifier and resistance switching characteristics before and after the forming process, respectively. The Schottky diodelike rectifier mechanism was also verified by various temperature measurements. Furthermore, robust resistance switching at a positive forming voltage, smaller than that required during negative bias forming, can be achieved. Both positive and negative forming processes are examined with current fitting results, which show different dominant mechanisms when using positive or negative biases. All these mechanisms have also been verified by temperature effect experiments, which confirmed the dominant conduction mechanisms. This, in combination with the fact that the positive forming voltage itself is smaller than the negative forming voltage, and decreases with device scale down, provides two highly beneficial results. This good performance achieved by using ITO with N-2 suggests significant progress of RRAM and remarkable potential applications.
Origin of Hopping Conduction in Graphene-Oxide-Doped Silicon Oxide Resistance Random Access Memory Devices
(2013-05-01)
Chang, Kuan-Chang
;
Zhang, Rui
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Lou, J. C.
In this letter, a double-active-layer (Zr:SiOx/C:SiOx) resistive switching memory device with a high ON/OFF resistance ratio and small working current (0.02 mA), is presented. Through the analysis of Raman and Fourier transform infrared spectroscopy spectra, we find that graphene oxide exists in the C:SiOx layer. It can be observed that Zr:SiOx/C: SiOx structure has superior switching performance and higher stability compared with the single-active-layer (Zr:SiOx) structure, which is attributed to the existence of graphene oxide flakes formed during the sputter process. I-V characteristics under a series of increasing temperature were analyzed to testify the carrier hopping distance variation, which is further verified by our graphene oxide redox reaction model.
Performance and characteristics of double layer porous silicon oxide resistance random access memory
(2013-06-24)
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
;
Zhang, Rui
;
Chang, Ting-Chang
;
Lou, J. C.
A bilayer resistive switching memory device with an inserted porous silicon oxide layer is investigated in this letter. Compared with single Zr:SiOx layer structure, Zr: SiOx/ porous SiOx structure outperforms from various aspects, including low operating voltages, tighter distributions of set voltage, higher stability of both low resistance state and high resistance state, and satisfactory endurance characteristics. Electric field simulation by COMSOL (TM) Multiphysics is applied, which corroborates that intensive electric field around the pore in porous SiOx layer guides the conduction of electrons. The constraint of conduction path leads to better stabilization and prominent performance of bilayer resistive switching devices. (C) 2013 AIP Publishing LLC.