Browsing by Author "Shih, Yao-Kai"

Now showing 1 - 2 of 2

Abnormal C-V Hump Effect Induced by Hot Carriers in Gate Length-Dependent p-Type LTPS TFTs
(2019-11-01)
Huang, Shin-Ping
;
Chen, Po-Hsun
;
Tsao, Yu-Ching
;
Chen, Hong-Chih
;
Zheng, Yu-Zhe
We investigate the abnormal current-voltage (C-V) hump effect of p-type low-temperature polysilicon (LTPS) thin-film transistors (TFTs) which have undergone high current operations. Experimental results indicate localized electron trapping in the gate insulator (GI), which is carried out near the drain. The ON-current ( ${I}_{ \mathrm{\scriptscriptstyle ON}}$ ) enhancement is due to the reduction of effective length, and the OFF-current ( ${I}_{ \mathrm{\scriptscriptstyle OFF}}$ ) decrease as the electron tunneling path distance increases. These can be observed after hot carrier stress in current characteristics. The C-V measurements demonstrate that the threshold voltage ( ${V}_{\text {th}}$ ) shift is associated with the gate length. In addition, capacitance-voltage measurements also show that this localized trapping region remains the same in length, regardless of channel length. Hence, a model is proposed to explain how the electric field, which is gate length-dependent, affects the source side of the device, and then lowers the source barrier height. This leads to bulk leakage, which causes the subthreshold swing degradation at device scale down.
Indium Diffusion Behavior and Application in HfO2-Based Conductive Bridge Random Access Memory
(1970-01-01)
Zheng, Hao-Xuan
;
Shih, Chih-Cheng
;
Chang, Ting-Chang
;
Shih, Lin-Yi
;
Shih, Yao-Kai
This study proposes the design of conductive bridge random access memory (CBRAM) using an indium electrode, which diffuses into hafnium oxide. The device is found to exhibit good operating characteristics, maintaining a large operation window, low set and reset voltages, and advantageous operation speed, thereby reducing operating power consumption. Electrical experiments, transmission electron microscopy, and energy-dispersive spectroscopy confirm that the device exhibits the characteristics of a CBRAM device. In addition, due to the large operation window of this In electrode device, a combination of two of these CBRAM can act as a complementary resistive switching (CRS) device with a large memory window.