Browsing by Author "Shih, Yu-Chuan"

Now showing 1 - 5 of 5

Biochemical sensing device
(2005-05-12)
Yang, Yuh-Shyong
;
Wu, Chung-Yu
;
Lu, Ude
;
Shih, Yu-Chuan
;
Hu, Ben C.-P.
The invention is a biochemical sensing device, including a photodiode capable of sensing the light generated by the reaction made by a specific compound, a specific enzyme, and a luminol as well as converting the optical signal into a current signal. Also, there is a current/voltage converting circuit capable of converting the current signal into an analog voltage signal. In turn, the analog voltage signal can be converted into a digital voltage signal through an analog/digital converter. Finally, by using an electronic device, the digital voltage signal can be received and analyzed, and through the analysis, the amount of the specific compound can be measured. The device of the invention can provide a simple real-time medical assay that can be performed in massive amount. For this reason, the drawbacks of a conventional spectrum analysis instrument of being bulky and expensive can be improved.
Electrochemically active novel amorphous carbon (a-C)/Cu3P peapod nanowires by low-temperature chemical vapor phosphorization reaction as high efficient electrocatalysts for hydrogen evolution reaction
(2019-09-20)
Manikandan, Arumugam
;
Sriram, Pavithra
;
Hsu, Kun-Chieh
;
Wang, Yi-Chung
;
Chen, Chia-Wei
Toward finding low-cost electrocatalysts with high catalytic properties to replace noble metals as high efficient electrocatalysts in electrochemical hydrogen evolution reaction (HER) of total water splitting plays a vital role to approach the green and sustainable energy supply. Here, we demonstrate the direct growth of novel copper phosphide coated with amorphous carbon, namely heterostructured a-C/Cu3P peapod nanowires from chemically synthesized copper nanowires (Cu NWs) followed by a chemical vapor phosphorization reaction (CVPR) process at a low temperature of 400 degrees C. The heterostructured a-C/Cu3P peapod nanowires exhibit a superior electrocatalytic activity by a lower overpotential of 287 mV at a current density of 10 mA cm(-2) with a low Tafel slope of 72 mV dec(-1) and excellent stability over 1000 cycles. The superior electrocatalytic performance can be explained by the superior contact of the electrolyte with active sites on the heterostructured a-C/Cu3P due to the high surface area of peapod nanowire structure covered by defective edges of graphene with the encapsulated amorphous carbon layer, which can tremendously enhance electrical conductivity at the surface. (C) 2019 Published by Elsevier Ltd.
Environmentally and Mechanically Stable Selenium 1D/2D Hybrid Structures for Broad-Range Photoresponse from Ultraviolet to Infrared Wavelengths
(2018-10-17)
Chen, Yu-Ze
;
You, Yen-Ting
;
Chen, Pin Jung
;
Li, Dapan
;
Su, Teng-Yu
Selenium (Se) is one of the potential candidates as photodetector because of its outstanding properties such as high photoconductivity (similar to 8 x 10(4) S cm(-1)), piezoelectricity, thermoelectricity, and nonlinear optical responses. Solution phase synthesis becomes an efficient way to produce Se, but a contamination issue that could deteriorate the electric characteristic of Se should be taken into account. In this work, a facile, controllable approach of synthesizing Se nanowires (NWs)/films via a plasma-assisted growth process was demonstrated at the low substrate temperature of 100 degrees C. The detailed formation mechanisms of nanowires arrays to thin films at different plasma powers were investigated. Moreover, indium (In) layer was used to enhance the adhesive strength with 50% improvement on a SiO2/Si substrate by mechanical interlocking and surface alloying between Se and In layers, indicating great tolerance for mechanical stress for future wearable devices applications. Furthermore, the direct growth of Se NWs/films on a poly(ethylene terephthalate) substrate was demonstrated, exhibiting a visible to broad infrared detection ranges from 405 to 1555 nm with a high on/off ratio of similar to 700 as well as the fast response time less than 25 ms. In addition, the devices exhibited fascinating stability in the atmosphere over one month.
Phase-Engineered PtSe2-Layered Films by a Plasma-Assisted Selenization Process toward All PtSe2-Based Field Effect Transistor to Highly Sensitive, Flexible, and Wide-Spectrum Photoresponse Photodetectors
(2018-05-09)
Su, Teng-Yu
;
Medina, Henry
;
Chen, Yu-Ze
;
Wang, Sheng-Wen
;
Lee, Shao-Shin
The formation of PtSe2-layered films is reported in a large area by the direct plasma-assisted selenization of Pt films at a low temperature, where temperatures, as low as 100 degrees C at the applied plasma power of 400 W can be achieved. As the thickness of the Pt film exceeds 5 nm, the PtSe2-layered film (five monolayers) exhibits a metallic behavior. A clear p-type semiconducting behavior of the PtSe2-layered film (approximate to trilayers) is observed with the average field effective mobility of 0.7 cm(2) V-1 s(-1) from back-gated transistor measurements as the thickness of the Pt film reaches below 2.5 nm. A full PtSe2 field effect transistor is demonstrated where the thinner PtSe2, exhibiting a semiconducting behavior, is used as the channel material, and the thicker PtSe2, exhibiting a metallic behavior, is used as an electrode, yielding an ohmic contact. Furthermore, photodetectors using a few PtSe2-layered films as an adsorption layer synthesized at the low temperature on a flexible substrate exhibit a wide range of absorption and photoresponse with the highest photocurrent of 9 mu A under the laser wavelength of 408 nm. In addition, the device can maintain a high photoresponse under a large bending stress and 1000 bending cycles.
Wafer Scale Phase-Engineered 1T-and 2H-MoSe2/Mo Core-Shell 3D-Hierarchical Nanostructures toward Efficient Electrocatalytic Hydrogen Evolution Reaction
(2016-11-23)
Qu, Yindong
;
Medina, Henry
;
Wang, Sheng-Wen
;
Wang, Yi-Chung
;
Chen, Chia-Wei
The necessity for new sources for greener and cleaner energy production to replace the existing ones has been increasingly growing in recent years. Of those new sources, the hydrogen evolution reaction has a large potential. In this work, for the first time, MoSe2/Mo core-shell 3D-hierarchical nanostructures are created, which are derived from the Mo 3D-hierarchical nanostructures through a low-temperature plasma-assisted selenization process with controlled shapes grown by a glancing angle deposition system.