Browsing by Author "Su, Yu-Ting"

Now showing 1 - 20 of 25

An Electronic Synapse Device Based on Solid Electrolyte Resistive Random Access Memory
(2015-08-01)
Zhang, Wei
;
Hu, Ying
;
Chang, Ting-Chang
;
Chang, Kuan-Chang
;
Tsai, Tsung-Ming
The multilevel capability of solid electrolyte resistive random access memory (RRAM) with a Pt/GeSO/TiN structure was explored for potential use as a synapse device. By varying the cutoff voltage during the dc I-V cycles or the ac pulse programming voltage amplitudes, continuous multilevel conductance states were obtained. The reference Pt/GeO/TiN RRAM was fabricated to certify the multilevel capability and was due to the character of the GeS solid electrolyte. Finally, the property of gradual conductance states was exploited to demonstrate spike-timing-dependent plasticity learning, which suggests device\'s potential for use as an electronic synapse device for neuromorphic systems.
Attaining resistive switching characteristics and selector properties by varying forming polarities in a single HfO2-based RRAM device with a vanadium electrode
(2017-07-07)
Lin, Chih-Yang
;
Chen, Po-Hsun
;
Chang, Ting-Chang
;
Chang, Kuan-Chang
;
Zhang, Sheng-Dong
This study proposes a method for a HfO2-based device to exhibit both resistive switching (RS) characteristics as resistive random access memory (RRAM) and selector characteristics by introducing vanadium (V) as the top electrode. This simple V/HfO2/TiN structure can demonstrate these two different properties depending on forming polarities. The RS mechanism is activated by a positive forming bias. In contrast, the selector property is induced by a negative forming bias. The material analyses firstly confirm the existence of V in the top electrode. Then the electrical measurements for the same V/HfO2/TiN structures but with different forming polarities were carried out to further investigate their DC sweeping characteristics to act as either a selector or RRAM device. Furthermore, reliability tests for both selector and RRAM devices were also conducted to confirm their switching stabilities. Finally, current fitting methods and temperature influence experiments were performed to investigate the carrier transport mechanisms. Finally, physical models were proposed to illustrate the selector property and RS mechanism for selector and RRAM devices, respectively. This simple device structure with its easy operating method accomplishes a significant advancement of devices combining both selector properties and RRAM for remarkable real applications in the near future.
Characteristics and Mechanisms of Silicon-Oxide-Based Resistance Random Access Memory
(2013-03-01)
Chang, Kuan-Chang
;
Tsai, Tsung-Ming
;
Chang, Ting-Chang
;
Wu, Hsing-Hua
;
Chen, Jung-Hui
Traditionally, a large number of silicon oxide materials are extensively used as various dielectrics for semiconductor industries. In general, silicon oxide cannot be used as resistance random access memory (RRAM) due to its insulating electrical properties. In this letter, we have successfully produced resistive switching and forming-free behaviors by zinc doped into silicon oxide. The current-voltage fitting data show that current transport mechanism is governed by Poole-Frenkel behavior in high-resistance state and Ohm's law in low-resistance state, consisting with filament theory. Additionally, good endurance and retention reliabilities are exhibited in the zinc-doped silicon oxide RRAM.
Characteristics of hafnium oxide resistance random access memory with different setting compliance current
(2013-10-14)
Su, Yu-Ting
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Zhang, Rui
In this Letter, the characteristics of set process of hafnium oxide based resistance random access memory are investigated by different set processes with increasing compliance current. Through current fitting, carrier conduction mechanism of low resistance state changes from hopping to surface scattering and finally to ohmic conduction with the increase of setting compliance current. Experimental data of current-voltage measurement under successive increasing temperature confirms the conduction mechanism transition. A model of filament growth is eventually proposed in a way by merging discrete metal precipitates and electrical field simulation by COMSOL Multiphysics further clarifies the properties of filament growth process. (C) 2013 AIP Publishing LLC.
Effect of charge quantity on conduction mechanism of high-and low-resistance states during forming process in a one-transistor-one-resistor resistance random access memory
(2017-05-01)
Wu, Cheng-Hsien
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
;
Chu, Tian-Jian
The forming process is a necessary and irreversible process to activate the resistance switching behavior in a resistance random access memory (RRAM) device. However, during the forming process, an overshoot current leads to device damage and causes inferior resistance switching characteristics; consequently, the process is considered to be a key factor in device degradation. In this paper, we find that a discontinuous conduction path can be formed by a pulse forming process such that the operation current can be reduced. We further investigate how the charge quantity during the forming process affects the carrier conduction mechanism of HRS, with all experiments and results demonstrated on onetransistor- one-resistor (1T1R) devices. (C) 2017 The Japan Society of Applied Physics
Efficient Implementation of Boolean and Full-Adder Functions With 1T1R RRAMs for Beyond Von Neumann In-Memory Computing
(2018-10-01)
Wang, Zhuo-Rui
;
Li, Yi
;
Su, Yu-Ting
;
Zhou, Ya-Xiong
;
Cheng, Long
In-memory computing architecture is an emerging revolutionary computing paradigm that can break the von Neumann bottleneck. Computing methodology and circuit codesign using the CMOS compatible 1T1R resistive random access memory (RRAM) integration structure is presented in this paper. Functionally complete Boolean logic and arithmetic functions are experimentally demonstrated. With a single 40-nm CMOS process 1T1R unit, each of the 16 binary logics can be realized in two logic steps with an additional readout step for cascading, which shows functional reconfiguration and low computational complexity. Up to 10(7) cycles of NAND and XOR logic operations are performed to validate the correctness and reliability. Moreover, several fundamental adder circuits are designed and experimentally demonstrated in 1T1R devices as the proof of concept of the 1T1R computing architecture. The adders proposed in this paper include a ripple-carry adder and its optimized design and a carry-select adder, which all show promising advantages in nonvolatility, computation speed, and circuit area. This paper reports the most complex yet efficient RRAM-based 8-bit addition function experimentally so far and lays a solid foundation for constructing the future in-memory computing architecture.
Electrical conduction mechanism of Zn:SiOx resistance random access memory with supercritical CO2 fluid process
(2013-08-19)
Chang, Kuan-Chang
;
Tsai, Tsung-Ming
;
Zhang, Rui
;
Chang, Ting-Chang
;
Chen, Kai-Huang
In this study, the electrical conduction mechanism of Zn:SiOx resistance random access memory (RRAM) treated with supercritical CO2 fluid (SCCO2) process was investigated by low temperature measurement. The current of low resistance state for current-voltage curves in SCCO2-treated and untreated Zn:SiOx RRAM were measured and compared under a low temperature range from 100K to 298 K. The electrical conduction mechanisms of hopping conduction and metal-like behaviors in SCCO2-treated and untreated Zn:SiOx RRAM were discussed, respectively. Finally, the electrical conduction mechanism was analyzed and verified by the chemical composition and bonding intensity of XPS analyses. (C) 2013 AIP Publishing LLC.
Endurance Improvement Technology With Nitrogen Implanted in the Interface of WSiOx Resistance Switching Device
(2013-07-01)
Syu, Yong-En
;
Zhang, Rui
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
Incorporation of nitrogen as an oxygen-confining layer in the resistance switching reaction region is investigated to improve the reliability of resistance random access memory (RRAM). The switching mechanism can be attributed to the formation and rupture of conduction filaments. A compatible WSiON (around 5 nm) layer is introduced at the interface of tungsten silicon oxide (WSiOx) and TiN electrode to prevent the randomly diffusing oxygen ions surpassing the storage region of the WSiON layer. The double-layer WSiOx/WSiON memory structure would enhance the endurance over 100 times so as to better confirm the WSiOx RRAM application of nonvolatile memory.
Functionally Complete Boolean Logic in 1T1R Resistive Random Access Memory
(2017-02)
Wang, Zhuo-Rui
;
Su, Yu-Ting
;
Li, Yi
;
Zhou, Ya-Xiong
;
Chu, Tian-Jian
Nonvolatile stateful logic through RRAM is a promising route to build in-memory computing architecture. In this letter, a logic methodology based on 1T1R structure has been proposed to implement functionally complete Boolean logics. Arbitrary logic functions could be realized in two steps: initialization and writing. An additional read step is required to read out the logic result, which is in situ stored in the nonvolatile resistive state of the memory. Cascade problem in building larger logic circuits is also discussed. Our 1T1R logic device and operation method could be beneficial for massive integration and practical application of RRAM-based logic.
High performance of graphene oxide-doped silicon oxide-based resistance random access memory
(2013-11-21)
Zhang, Rui
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chen, Kai-Huang
In this letter, a double active layer (Zr:SiO (x) /C:SiO (x) ) resistive switching memory device with outstanding performance is presented. Through current fitting, hopping conduction mechanism is found in both high-resistance state (HRS) and low-resistance state (LRS) of double active layer RRAM devices. By analyzing Raman and FTIR spectra, we observed that graphene oxide exists in C:SiO (x) layer. Compared with single Zr:SiO (x) layer structure, Zr:SiO (x) /C:SiO (x) structure has superior performance, including low operating current, improved uniformity in both set and reset processes, and satisfactory endurance characteristics, all of which are attributed to the double-layer structure and the existence of graphene oxide flakes formed by the sputter process.
Hopping Effect of Hydrogen-Doped Silicon Oxide Insert RRAM by Supercritical CO2 Fluid Treatment
(2013-05-01)
Chang, Kuan-Chang
;
Pan, Chih-Hung
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Zhang, Rui
In this letter, we introduced hydrogen ions into titanium metal doped into SiO2 thin film as the insulator of resistive random access memory (RRAM) by supercritical carbon dioxide (SCCO)(2) fluid treatment. After treatment, low resistance state split in to two states, we find the insert RRAM, which means it has an operating polarity opposite from normal RRAM. The difference of the insert RRAM is owing to the resistive switching dominated by hydrogen ions, dissociated from OH bond, which was not by oxygen ions as usual. The current conduction mechanism of insert RRAM was hopping conduction due to the metal titanium reduction reaction through SCCO2.
Improvement mechanism of resistance random access memory with supercritical CO2 fluid treatment
(2014-01-01)
Chang, Kuan-Chang
;
Chen, Jung-Hui
;
Tsai, Tsung-Ming
;
Chang, Ting-Chang
;
Huang, Syuan-Yong
We demonstrated that the supercritical CO2 fluid treatment was a new concept to efficiently reduce the operation current of resistance random access memory. The dangling bonds of tin-doped silicon oxide (Sn:SiOx) thin film were passivated by the hydration-dehydration reaction through supercritical CO2 fluid treatment, which was verified by the XPS and FTIR analyses. The current conduction mechanism of low resistance state in post-treated Sn:SiOx thin film was transferred to hopping conduction from Ohmic conduction. Furthermore, the current conduction mechanism of high resistance state in the memory device was transferred to Schottky emission from Frenkel-Poole conduction. The phenomena were attributed to the discontinuous metal filament formed by hydration-dehydration reaction in Sn:SiOx thin film through supercritical fluid treatment. Finally, a reaction model was proposed to explain the mechanism of current reduction in Sn:SiOx thin film with supercritical CO2 fluid treatment. Crown Copyright (C) 2013 Published by Elsevier B.V. All rights reserved.
Low Temperature Improvement Method on Zn:SiOx Resistive Random Access Memory Devices
(2013-04-01)
Chang, Kuan-Chang
;
Tsai, Tsung-Ming
;
Chang, Ting-Chang
;
Wu, Hsing-Hua
;
Chen, Kai-Huang
To improve the resistive switching properties of the resistive random access memory (RRAM), the supercritical carbon dioxide (SCCO2) fluid is used as a low temperature treatment. In this letter, the Zn:SiOx thin films are treated by SCCO2 fluid mixed with pure water. After SCCO2 fluid treatment, the resistive switching qualities of the Zn:SiOx thin films are carried out by XPS, fourier transform infrared spectroscopy, and IV measurement. We believe that the SCCO2-treated Zn:SiOx thin film is a promising material for RRAM applications due to its compatibility with portable flat panel display.
Mechanism of Triple Ions Effect in GeSO Resistance Random Access Memory
(2015-06-01)
Zhang, Wei
;
Hu, Ying
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
In this letter, a triple-ion redox reaction has been proposed and investigated in GeSO-based resistance random access memory. Continuous multiresistance states can be obtained by applying a series of increasing cutoff voltages in both set and reset processes. Using data retention tests, these multistates in the set and reset processes were confirmed to be stable. The conduction mechanism gradually changed during reset process from space charge limited current to Schottky emission. A triple-ion reaction model has been proposed to reveal the chemical reaction properties in the resistive switching process.
Modifying Indium-Tin-Oxide by Gas Cosputtering for Use as an Insulator in Resistive Random Access Memory
(2016-11)
Chen, Po-Hsun
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Pan, Chih-Hung
In this paper, indium-tin-oxide (ITO) was used to act as both insulator and top electrode in resistive random access memory (RRAM) on identical bottom substrates. This is achieved by cosputtering an ITO target with nitride (N-2) or oxygen (O-2) gas as the insulator; then capping by an ITO electrode, such that both the rectifier and RRAM characteristics can be achieved before and after a forming process, respectively. In contrast, using pure ITO as an insulator does not exhibit RRAM behavior. To verify the rectifier and RRAM characteristics, material analyses and electrical measurements at various temperatures were conducted. Reliability tests including retention and endurance were also applied to verify the resistance switching stability. Finally, the rectifier and RRAM conduction models were proposed to examine the resistance switching behaviors. By applying the ITO material as both electrode and insulator, the resistance switching characteristic with high reliability is thus obtained.
Nonvolatile reconfigurable sequential logic in a HfO2 resistive random access memory array
(2017-05-28)
Zhou, Ya-Xiong
;
Li, Yi
;
Su, Yu-Ting
;
Wang, Zhuo-Rui
;
Shih, Ling-Yi
Resistive random access memory (RRAM) based reconfigurable logic provides a temporal programmable dimension to realize Boolean logic functions and is regarded as a promising route to build non-von Neumann computing architecture. In this work, a reconfigurable operation method is proposed to perform nonvolatile sequential logic in a HfO2-based RRAM array. Eight kinds of Boolean logic functions can be implemented within the same hardware fabrics. During the logic computing processes, the RRAM devices in an array are flexibly configured in a bipolar or complementary structure. The validity was demonstrated by experimentally implemented NAND and XOR logic functions and a theoretically designed 1-bit full adder. With the trade-off between temporal and spatial computing complexity, our method makes better use of limited computing resources, thus provides an attractive scheme for the construction of logic-in-memory systems.
Obtaining Lower Forming Voltage and Self-Compliance Current by Using a Nitride Gas/Indium-Tin Oxide Insulator in Resistive Random Access Memory
(2016-12)
Chen, Po-Hsun
;
Chang, Ting-Chang
;
Chang, Kuan-Chang
;
Tsai, Tsung-Ming
;
Pan, Chih-Hung
This paper investigates the characteristics of applying indium-tin oxide (ITO) with and without nitride gas (N-2) as the insulator in resistive random access memory (RRAM). After cosputtering an ITO target with N-2 as the insulator and capping the same ITO material as the top electrode, the device exhibits rectifier and resistance switching characteristics before and after the forming process, respectively. The Schottky diodelike rectifier mechanism was also verified by various temperature measurements. Furthermore, robust resistance switching at a positive forming voltage, smaller than that required during negative bias forming, can be achieved. Both positive and negative forming processes are examined with current fitting results, which show different dominant mechanisms when using positive or negative biases. All these mechanisms have also been verified by temperature effect experiments, which confirmed the dominant conduction mechanisms. This, in combination with the fact that the positive forming voltage itself is smaller than the negative forming voltage, and decreases with device scale down, provides two highly beneficial results. This good performance achieved by using ITO with N-2 suggests significant progress of RRAM and remarkable potential applications.
Origin of Hopping Conduction in Graphene-Oxide-Doped Silicon Oxide Resistance Random Access Memory Devices
(2013-05-01)
Chang, Kuan-Chang
;
Zhang, Rui
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Lou, J. C.
In this letter, a double-active-layer (Zr:SiOx/C:SiOx) resistive switching memory device with a high ON/OFF resistance ratio and small working current (0.02 mA), is presented. Through the analysis of Raman and Fourier transform infrared spectroscopy spectra, we find that graphene oxide exists in the C:SiOx layer. It can be observed that Zr:SiOx/C: SiOx structure has superior switching performance and higher stability compared with the single-active-layer (Zr:SiOx) structure, which is attributed to the existence of graphene oxide flakes formed during the sputter process. I-V characteristics under a series of increasing temperature were analyzed to testify the carrier hopping distance variation, which is further verified by our graphene oxide redox reaction model.
Origin of Hopping Conduction in Sn-Doped Silicon Oxide RRAM With Supercritical CO2 Fluid Treatment
(2012-12-01)
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Chang, Geng-Wei
;
Syu, Yong-En
In this letter, we investigate the origin of hopping conduction in the low-resistance state (LRS) of a resistive random access memory device with supercritical CO2 fluid treatment. The dangling bonds of a tin-doped silicon oxide (Sn:SiOx) thin film were cross linked by the hydration-dehydration reaction through supercritical fluid technology. The current conduction mechanism of the LRS in the posttreated Sn:SiOx thin film was transferred to hopping conduction from Ohmic conduction, owing to isolation of metal tin in the Sn:SiOx thin film by hydration-dehydration reaction. The phenomena can be verified by our proposed reaction model, which is speculated by the X-ray photoelectron spectroscopy analyses.
Overcoming Limited Resistance in 1T1R RRAM Caused by Pinch-Off Voltage During Reset Process
(2019-11-01)
Zheng, Hao-Xuan
;
Chen, Min-Chen
;
Chang, Ting-Chang
;
Su, Yu-Ting
;
Chen, Wen-Chung
This article explains the difference in the reset processes between single RRAM and 1T1R RRAM structures. In the single RRAM, as the reset voltage increases, the off-state resistance increases. This is a normal RRAM operation. However, in the 1T1R structure, the reset voltage increases while the OFF-state resistance does not increase. This may be caused by either current or voltage being insufficient to switch the RRAM to its higher resistance state. The measurements of real voltage indicate that the insufficient voltage is in fact the main cause. For the 1T1R RRAM structure, if it is to be reset to a higher resistance state, it is best done by increasing the gate voltage to increase the OFF-state resistance. Therefore, we provide a method to reduce the misjudgment in the array, and it would be beneficial for the development of high-density memory.