Browsing by Author "Su, Yuchun"

Now showing 1 - 2 of 2

Characteristics of soluble microbial products in membrane bioreactor and its effect on membrane fouling
(2010-01-15)
Pan, Jill Ruhsing
;
Su, Yuchun
;
Huang, Chihpin
;
環境工程研究所
;
生物科技學系
In this study, the accumulation and characteristics of soluble microbial products (SMP) in the mixed liquor and the effluent of the membrane bioreactor (MBR) were measured and compared. It was found that the concentration of SMP decreased when the SRT was increased from 10 days to 30 days, and then stabilized as SRT was increased to 60 days. The molecular weight (MW) distributions of SMP indicated that the SMP of larger MW (> 30 kDa) was the most abundant fraction in the MBR. The similar MW distributions of SMP in the mixed liquor and effluent implied that membrane fouling due to SMP in the initial slow fouling stage was not due to size sieving. After the MBR was operated for a period of time, only the SMP of relatively large MW (> 30 kDa) was detected in the mixed liquor. The result indicated that size sieving of SMP occurred only after a cake layer was formed on the membrane surface although the effect was not significant and only worked on larger molecules. The accumulation of hydrophilic components of SMP in the mixed liquor of the bioreactor suggested that the hydrophilic fraction (in carbohydrates) could be the major cause for membrane fouling. (C) 2009 Elsevier B.V. All rights reserved.
Impact of sludge retention time on sludge characteristics and microbial community in MBR
(2011)
Su, Yuchun
;
Pan, Jill Ruhsing
;
Huang, Chihpin
;
Chang, Chialing
;
環境工程研究所
In this study, the impact of sludge retention time (SRT) on sludge characteristics and microbial community and the effect on membrane fouling in membrane bioreactor (MBR) was investigated. The results show that MBR with longer SRT has less fouling propensity, in agreement with other studies, despite the fact that the MBR with longer SRT contained higher MLSS and smaller particle size. However, much more soluble microbial products (SMPs) were released in MBR with shorter SRT. More slime on the membrane surface was observed in MBR with shorter SRT while sludge cakes formed on the membrane surface in MBR with longer SRT. The results show that SMP contributes to the severe fouling observed in MBR with shorter SRT, which is in agreement with other studies showing that SMPs were the major foulants in MBR. Under different SRTs of operation, the bacterial community structures of the sludge obtained by use of polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) were almost identical, but those on the membrane surface differed substantially. It suggests that, although SRT has impact on sludge characteristics, it doesn't affect the microbial community in the suspension.