Browsing by Author "Tong, Yang"

Now showing 1 - 2 of 2

Hardening steels by the generation of transient phase using additive manufacturing
(2019-06-01)
Huang, E-Wen
;
Lee, Soo Yeol
;
Jain, Jayant
;
Tong, Yang
;
An, Ke
In the present work, the tensile properties of 15-5 PH steel fabricated by selective laser melting (SLM) were examined with respect to the transient austenite phase. Compared with the 8%-transient-phase sample, the 18%-transient-phase one shows higher ultimate tensile strength and relatively low yield strength, as well as hardening behavior. We conducted in-situ neutron-diffraction study to examine the microstructure evolution for mechanistic understanding. After applying the external load, most non-equilibrium, retained austenite in the 8% transient-phase sample transforms before the yield strength, whereas in the 18%-transient-phase sample only 50% of the austenite transforms. Accompanying with the phase transformation, a decrease in the dislocation density and the dislocation strain energy-assisted phase transformation of the ferrite phase are found in the 8%-transient-phase sample even before yielding, which, however, is not the case in the 18%-transient-phase sample. The study demonstrates the SLM enables tuning the amount of transient-phase ratio and coherency between phases to realize a mechanical property control for additive manufactured steel.
Origin of serrated flow in bulk metallic glasses
(2019-03-01)
Xie, Xie
;
Lo, Yu-Chieh
;
Tong, Yang
;
Qiao, Junwei
;
Wang, Gongyao
Bulk metallic glasses (BMGs) possess amorphous structure and show unique mechanical properties, such as extremely high strength and excellent damage tolerance, entitling them as potential structural materials. So far a great amount of work has been conducted to study BMGs' macroscopic mechanical properties and examine corresponding microscopic deformation defects. However, the connection between macroscopic inhomogeneous deformation at room temperature and microscopic deformation carriers is still poorly understood, due to the lack of an appropriate experimental technique to directly probe the inhomogeneous deformation process on the proper spatial and temporal scales. Here we present the deformation details via in situ thermal imaging about the evolution of heat bands associated with successive serration behavior. For the first time, our experimental work clarifies the coupling of serrated flows with shear band activities, especially the often omitted fine serrations induced by shear band nucleation or the early stage of propagation. Meanwhile, serration behavior of BMGs is simulated through the kinetic Monte Carlo (kMC) method by integrating local heating (thermal softening and beta-relaxation) effects, which exhibits good agreement with experimental results. These findings will advance our fundamental understanding of the shear band operation down to microscopic level, which may shed light on the control of shear banding for the application of BMGs. (C) 2018 Elsevier Ltd. All rights reserved.