Browsing by Author "Tsao, Yu-Chi"

Now showing 1 - 2 of 2

A 2.4-Gsample/s DVFS FFT processor for MIMO OFDM communication systems
(2008-05-01)
Chen, Yuan
;
Lin, Yu-Wei
;
Tsao, Yu-Chi
;
Lee, Chen-Yi
;
電子工程學系及電子研究所
This paper presents a new dynamic voltage and frequency scaling (DVFS) FFT processor for MIMO OFDM applications. By the proposed multimode multipath-delay-feedback (MMDF) architecture, our FFT processor can process 1-8-stream 256-point FFTs or a high-speed 256-point FFT in two processing domains at minimum clock frequency for DVFS operations. A parallelized radix-2(4) FFT algorithm is also employed to save the power consumption and hardware cost of complex multipliers. Furthermore, a novel open-loop voltage detection and scaling (OLVDS) mechanism is proposed for fast and robust voltage management. With these schemes, the proposed FFT processor can operate at adequate voltage/frequency under different configurations to support the power-aware feature. A test chip of the proposed FITT processor has been fabricated using UMC 90 nm single-poly nine-metal CMOS process with a core area of 1.88 x 1.88 mm(2). The SQNR performance of this FFT chip is over 35.8 dB for QPSK/16-QAM modulation. Power dissipation of 2.4 Gsample/s 256-point FFT computations is about 119.7 mW at 0.85 V. Depending on the operation mode, power can be saved by 18%-43% with voltage scaling in TT corner.
An indexed-scaling pipelined FFT processor for OFDM-based WPAN applications
(2008-02-01)
Chen, Yuan
;
Tsao, Yu-Chi
;
Lin, Yu-Wei
;
Lin, Chin-Hung
;
Lee, Chen-Yi
In this brief, a high-throughput and low-complexity fast Fourier transform (FFT) processor for wideband orthogonal frequency division multiplexing communication systems is presented. A new indexed-scaling method is proposed to reduce both the critical-path delay and hardware cost by employing shorter wordlength. Together with the mixed-radix multipath delay feedback structure, the proposed FFT processor can achieve very high throughput with low hardware cost. From analysis, it is shown that the proposed indexed-scaling method can save at least 11% memory utilizations compared to other state-of-the-art scaling algorithms. Also,,a-test chip of a 1.2 Gsample/s 2048-point FFT processor has been designed using UMC 90-nm 1P9M process with a core area of 0.97 mm(2). The signal-to-quantization-noise ratio (SQNR) performance of this test chip is over 32.7 dB to support 16-QAM modulation and the power consumption is about 117 mW at 300 MHz. Compared to the fixed-point FFT processors, about 26% area and 28% power can be saved under the same throughput and SQNR specifications.