Browsing by Author "Wei, Tzu-Hui"

Now showing 1 - 5 of 5

Curved polymer nanodiscs by wetting nanopores of anodic aluminum oxide templates with polymer nanospheres
(2014)
Chi, Mu-Huan
;
Kao, Yi-Huei
;
Wei, Tzu-Hui
;
Lee, Chih-Wei
;
Chen, Jiun-Tai
Although nanostructures with diverse morphologies have been fabricated, it is still a great challenge to prepare anisotropic two-dimensional (2-D) nanostructures, especially non-planar disc-like nanostructures. In this work, we develop a simple method to prepare curved polymer nanodiscs with regular sizes by wetting polymer nanospheres in the nanopores of anodic aluminum oxide (AAO) templates. Polystyrene (PS) nanospheres are first fabricated by using a non-solvent-assisted template wetting method. By annealing the PS nanospheres in the nanopores of AAO templates, curved PS nanodiscs can be produced. The length and morphology of the curved PS nanodiscs can be controlled by the wetting conditions such as the annealing temperatures and times. For some stacked nanospheres, the annealing process can result in the formation of helix-like nanostructures. To demonstrate the universality of this work, this approach is also applied to poly(methyl methacrylate) (PMMA), another common polymer, and similar results are obtained.
Effect of Nonsolvent on the Formation of Polymer Nanomaterials in the Nanopores of Anodic Aluminum Oxide Templates
(1970-01-01)
Lee, Chih-Wei
;
Wei, Tzu-Hui
;
Chang, Chun-Wei
;
Chen, Jiun-Tai
;
應用化學系
"We study the effect of nonsolvent on the formation of polymer nanomaterials in the nanopores of porous templates. Water (nonsolvent) is added into a poly (methyl methacrylate) (PMMA) solution in dimethylformamide (DMF) confined in the nanopores of an anodic aluminum oxide (AAO) template. Water forms a wetting layer on the pore wall and causes the PMMA solution to be isolated in the center of the nanopore, resulting in the formation of PMMA nanospheres or nanorods after the solvent is evaporated. The formation of the polymer nanomaterials induced by nonsolvent is found to be driven by the Rayleigh-instability-type transformation. Without adding the nonsolvent, PMMA chains precipitate on the walls of the nanopores after the solvent is evaporated, and PMMA nanotubes are obtained."
Fabrication of Multicomponent Polymer Nanostructures Containing PMMA Shells and Encapsulated PS Nanospheres in the Nanopores of Anodic Aluminum Oxide Templates
(2015-03-01)
Ko, Hao-Wen
;
Chi, Mu-Huan
;
Chang, Chun-Wei
;
Su, Chun-Hsien
;
Wei, Tzu-Hui
Multi-component polymer nanomaterials have attracted great attention because of their applications in areas such as biomedicine, tissue engineering, and organic solar cells. The precise control over the morphologies of multi-component polymer nanomaterials, however, is still a great challenge. In this work, the fabrication of poly(methyl methacrylate)(PMMA)/polystyrene (PS) nanostructures that contain PMMA shells and encapsulated PS nanospheres is studied. The nanostructures are prepared using a triple solution wetting method with anodic aluminum oxide (AAO) templates. The nanopores of the templates are wetted sequentially by PS solutions in dimethylformamide (DMF), PMMA solutions in acetic acid, and water. The compositions and morphologies of the nanostructures are controlled by the interactions between the polymers, solvents, and AAO walls. This work not only presents a feasible method to prepare multi-component polymer nanomaterials, but also leads to a better understanding of polymer-solvent interactions in confined geometries.
Fabrication of Polymer Nanopeapods in the Nanopores of Anodic Aluminum Oxide Templates Using a Double-Solution Wetting Method
(2014-08-12)
Chen, Jiun-Tai
;
Wei, Tzu-Hui
;
Chang, Chun-Wei
;
Ko, Hao-Wen
;
Chu, Chien-Wei
Although one-dimensional polymer nanomaterials can be prepared by approaches such as the template method, the control over the morphologies of one-dimensional polymer nanomaterials containing multiple components is still a great challenge. In this work, we investigate the formation of polymer nanopeapods using a novel double-solution wetting method in the nanopores of anodic aluminum oxide (AAO) templates. A polystyrene (PS) solution in dimethylformamide (DMF) is first introduced into the nanopores of the AAO templates. Then a second polymer solution of poly(methyl methacrylate) (PMMA) in acetic acid is infiltrated into the nanopores. Because of the stronger interaction between acetic acid and aluminum oxide than that between DMF and aluminum oxide, the PMMA solution preferentially wets the pore walls of the templates and the PS solution is isolated in the center of the nanopores. After the evaporation of the solvent, peapod-like PS/PMMA nanostructures are obtained, where the shell and the core are composed of PMMA and PS, respectively. The compositions of the polymer nanopeapods are confirmed by removing PS or PMMA selectively. The formation mechanism of the nanostructures is related to the Rayleigh-instability-type transformation and further studied by changing experimental parameters such as the polymer concentration or the polymer molecular weight. This work not only provides a simple approach to prepare multicomponent polymer nanomaterials with controlled morphologies and sizes, but also contributes to a deeper understanding of polymer solvent-interactions in confined geometries.
Porous Polymer Nanostructures Fabricated by the Surface-Induced Phase Separation of Polymer Solutions in Anodic Aluminum Oxide Templates
(2013-08-13)
Wei, Tzu-Hui
;
Chi, Mu-Huan
;
Tsai, Chia-Chan
;
Ko, Hao-Wen
;
Chen, Jiun-Tai
We study the formation of porous polymer nanostructures fabricated by the surface-induced phase separation of polymer solutions in anodic aluminum oxide (AAO) templates. Poly(methyl methacrylate) (PMMA) and tetrahydrofuran (THF) are used to investigate the evolution process of the surface-induced phase separation. With the longer immersion time of the AAO template in the polymer solution, the size of the solvent-rich droplet is increased by the coarsening process, resulting in the formation of porous polymer nanostructures. The coarsening mechanism is further evaluated by changing the experimental parameters including the immersion time, the polymer concentration, the polymer molecular weight, and the solvent quality. Under conditions in which polymer solutions have higher viscosities, the coarsening process is slowed down and the formation of the porous nanostructures is prohibited. The prevention of the porous nanostructures can also be realized by adding water to the PMMA/THF solution before the immersion process.