Browsing by Author "Wong, Hin Yong"

Now showing 1 - 4 of 4

Efficient semitransparent organic solar cells with good color perception and good color rendering by blade coating
(2017-04)
Wong, Ying Qian
;
Meng, Hsin-Fei
;
Wong, Hin Yong
;
Tan, Ching Seong
;
Wu, Chen-Yu
This paper proposes high efficiency semitransparent organic solar cells (OSCs) with good color perception and good color rendering using blade coating technique. We investigate four different polymer blends and first fabricate small area devices with active area of 0.04 cm(2), followed by large area devices with active area of 10.8 cm(2). Two of the polymer blends, 2,6-Bis(trimethyltin)-4,8-bis(5-(2-ethylhexyl) thiophen-2-yl)benzo[1,2-b:4,5-b\']dithiophene:6,6-phenyl C71-butyric acid methyl ester (PBDTTT-CT:PC71BM) and poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b\'] dithiophene-2,6-diyl-alt-(4-( 2-ethylhexyl)-3-fluorothienof 3,4-b Ithiophene-)-2-carboxylate-2-6-diyl)]: PC71BM (PBDTT-EFT:PC71BM) show promising results. For small area devices, semitransparent PBDTIT-CT:PC71BM and semitransparent PBDTIT-EFT:PC71BM achieve a power conversion efficiency (PCE) of 5.2% (opaque PCE = 7.5%) and 5.6% (opaque PCE = 9.4%) respectively. For large area devices, they are found to produce a PCE of 3.8% (opaque PCE = 4.2%) and 5.3% (opaque PCE = 5.9%) respectively. Based on the CIE 1931 chromaticity diagram, semitransparent PBDTIT-CT:PCTIBM and semitransparent PBITITT-EFT:PCTIBM are located very close to the standard illuminant D65, indicating good color perception. As for color rendering, they demonstrate high color rendering index (CR1) of 95.4 and 87.1 respectively. These combined high performances indicate high-quality transmitted light, which is suitable for window application. (C) 2017 Published by Elsevier B.V.
External serial connection without layer patterning for organic solar cells
(2016-12-01)
Wong, Ying Qian
;
Wong, Hin Yong
;
Tan, Ching Seong
;
Meng, Hsin-Fei
;
物理研究所
This paper proposes a novel alternative to conventional internal serial connection, where precise patterning and scribing of organic layers can be eliminated. Adjacent cells can be made nearer for better space-utilization and higher voltages per unit area. Also, blade coating is proposed as the fabrication method as it has low material wastage (less than 5%), easily scalable to large area, has high film uniformity and has high throughput due to its roll-to-roll potential. This paper demonstrates 3-cells large area (12.98 cm(2)) external serial connection organic solar cells (OSCs) using the material poly(3-hexylthiophene-2,5-diyl) : [6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM) and 2,6-Bis(trimethyltin)-4, 8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo [1,2-b:4,5-b']dithiophene:6,6-phenyl C71-butyric acid methyl ester (PBDTTT-CT:PC71BM) respectively. The power conversion efficiencies (PCEs) of the resulting 3-cells modules are 2.0% and 4.1% respectively. (C) 2016 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).
Highly efficient and stable organic solar cell modules processed by blade coating with 5.6% module efficiency and active area of 216 cm(2)
(2019-03-01)
Huang, Kuan-Min
;
Wong, Ying Qian
;
Lin, Man-Chun
;
Chen, Chao-Hsuan
;
Liao, Chung-Hung
In this study, an efficient and stable large-area blade-coated organic solar cell (OSC) module with an active area of 216 cm(2) (16 elementary cells connected in series) is demonstrated by combining appropriate thermal annealing treatment with the use of 4,4 '-(((methyl(4-sulphonatobutyl)ammonio)bis(propane-3,1-diyl))bis(dimethyl-ammoniumdiyl))bis-(butane-1-sulfonate) (MSAPBS) as the cathode interfacial layer. For the opaque device using poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b ']dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl)] (PBDTTT-EFT (PTB7-Th)):[6,6]-phenyl C-71-butyric acid methyl ester (PC71BM) blend film as the active layer, the power conversion efficiency (PCE) of 5.6% is achieved under AM 1.5G solar light illumination. Very encouragingly, our strategy can be applicable for semitransparent OSCs, and a remarkable PCE up to 4.5% is observed. To the best of our knowledge, the PCE of 5.6% for opaque device and 4.5% for semitransparent device represent the highest PCE ever reported for OSCs with the active area exceeding 100 cm(2). The devices also show an impressive stability under outdoor environment, where the efficiency decay is less than 30% for 60 days. Our findings can pave the way toward the development of organic solar cell modules with high performance and long-term stability.
Hydro gel light-guiding conjunction for absorptive type multi-ions detection
(2016-10-05)
Lin, Hung-Cheng
;
Yang, Sean Tsungyeh
;
Ng, Sock Hoon
;
Zan, Hsiao-Wen
;
Meng, Hsin-Fei
We present a novel miniaturized solid state sensor produced by embedding two optical fibers in a sensing hydro gel conjunction. The conjunction is a poly (2-hydroxyethyl methacrylate) (poly HEMA) hydro gel mixed with two kinds of selective fluorescent probes. Meso-2,6-Dichlorophenyltripyrrinone (TPN-Cl2) is used to react with zinc ion (Zn2+) and the synthesized "Chemosensor 1" is used to detect ferric ion (Fe3+). This hydro gel conjunction can serve as a light-guiding waveguide that allows light signals to transfer between two fibers. By using a multi-wavelength excitation light, a mixed solution that contains Zn2+ and Fe3+ can be detected in real-time. This miniaturized sensor develops an image for real-time monitoring of Zn2+ and Fe3+ ions in vivo. (C) 2016 Elsevier B.V. All rights reserved.