Browsing by Author "Wu, Bo-Hao"

Now showing 1 - 6 of 6

Fabrication and Thermal Insulation Properties of Bamboo-Shaped Polymer Fibers by Selective Solvent Vapor Annealing
(2018-12-01)
Chiu, Yu-Jing
;
Chiu, Han-Lun
;
Tseng, Hsiao-Fan
;
Wu, Bo-Hao
;
Li, Jia-Wei
Fibrillar materials have gained much attention recently because of their unique properties and potential applications. Although many methods have been developed to fabricate materials, it remains challenging to prepare fibrillar materials containing multicomponent materials or even with complex structures. Here, a facile strategy is developed to fabricate bamboo-shaped fibers by treating electrospun polymer core-shell fibers with solvent vapor annealing. Electrospun polystyrene (PS)/poly(methyl methacrylate) (PMMA) core-shell fibers are first prepared by electrospinning PS/PMMA blend solutions via a phase separation process. When the PS/PMMA core-shell fibers are annealed with the vapor of cyclohexane, which swells and delocalizes the PS domains selectively, the fibers transform into bamboo-shaped structures. The bamboo-shaped structures can be further examined by swelling and delocalizing the PMMA domains selectively, revealing the undulated PS structures. The thermal insulation properties of the fibers with bamboo-shaped structures are observed to be enhanced compared with the original polymer core-shell fibers.
From Electrospun Polymer Core-Shell Fibers to Polymer Hemispheres and Spheres: Two Types of Transformation Processes and Tearing Films with Linearly Arranged Cavities
(2017-11-28)
Chiu, Yu-Jing
;
Tseng, Hsiao-Fan
;
Lo, Yu-Ching
;
Wu, Bo-Hao
;
Chen, Jiun-Tai
Electrospun polymer core shell fibers have gained much attention because of their promising applications in areas such as electronic devices, drug delivery, and tissue engineering. The morphology transformation of polymer core shell fibers, however, has been rarely investigated. Here, we study the effect of thermal annealing on the morphology transformation of electrospun polystyrene (PS)/poly(methyl methacrylate) (PMMA) core-shell fibers on PMMA. films. Two types of transformation processes are discovered. In the first type of the transformation process (type I), the PS cores transform to hemispherical particles after the annealing process; in the second type of the transformation process (type II), the PS cores transform to spherical particles after the annealing process. The measured sizes of the hemispherical and spherical PS domains fall into two classified regions, as predicted for the two different types of transformation processes. It is also observed that the growth rates of the undulated amplitude are similar for the two different types of transformation processes, but the type I fibers start to undulate at later annealing times than the type II fibers do. When the PS particles are selectively removed, the PMMA films with linearly arranged cavities are used for the tearing experiments, demonstrating a proof of concept on the potentials in studying the mechanical properties of cavity-containing films.
Plateau-Rayleigh Instability Morphology Evolution (PRIME): From Electrospun Core-Shell Polymer Fibers to Polymer Microbowls
(2017-03-01)
Chiu, Yu-Jing
;
Tseng, Hsiao-Fan
;
Lo, Yu-Ching
;
Wu, Bo-Hao
;
Chen, Jiun-Tai
Electrospun core-shell fibers have great potentials in many areas, such as tissue engineering, drug delivery, and organic solar cells. Although many core-shell fibers have been prepared and studied, the morphology transformation of core-shell fibers have been rarely studied. In this work, the morphology evolution of electrospun core-shell polymer fibers driven by the Plateau-Rayleigh instability is investigated. Polystyrene/poly(methyl methacrylate) (PS/PMMA) core-shell fibers are first prepared by using blend solutions and a single axial electrospinning setup. After PS/PMMA core-shell fibers are annealed on a PS film, the fibers undulate and sink into the polymer film, forming core-shell hemispheres. The evolution process, which can be observed in situ by optical microscopy, is mainly driven by achieving lower surface and interfacial energies. The morphologies of the transformed structures can be confirmed by a selective removal technique, and polymer microbowls can be obtained.
Radial Linear Polymer Patterns Driven by the Marangoni Instability and Lateral Phase Separation for the Formation of Nanoscale Perforation Lines
(2019-05-01)
Wu, Bo-Hao
;
Chang, Kai-Chieh
;
Hsu, Hsun-Hao
;
Chiu, Yu-Jing
;
Chiu, Tang-Yao
Phase separation under convection, related to the Marangoni instability, is critical in the development of advanced polymer processing technologies. The formation mechanisms of polymer patterns driven by the phase separation under convection, however, still require further investigations. In this work, we study the phase separation of polystyrene (PS)/poly(methyl methacrylate) (PMMA) bilayer films during the spin-coating processes. PMMA film-coated glass substrates are dripped by PS solutions in toluene before spinning. The concentration gradients of the PS solutions and the swollen PMMA films cause the surface tension-driven Marangoni instability; lateral phase separations also occur during the spin-coating processes, forming the interesting and uncommon radial linear patterns with nanoscale heights on the PS/PMMA bilayer films. By changing the solution waiting time and spin rates, the surface morphologies of the PS/PMMA bilayer films can be controlled. At longer waiting times, the higher degrees of swelling of the PMMA films by the solvents allow the formation of the polymer patterns; at higher spin-coating rates, the faster solvent evaporation improves the ordering of the polymer patterns. Furthermore, the morphologies of the PS/PMMA bilayer films can be confirmed using the selective removal technique; the PS films with linear-arranged cavities and the PMMA films with bumps can be obtained using acetic acid and cyclohexane, respectively. Finally, a proof of concept on the potentials in applying the cavities-containing PS films for nanoscale perforation lines is also demonstrated.
Solvent-Induced Shape Recovery of Anisotropic Polymer Particles Prepared by a Modified Thermal Stretching Method
(2018-07-17)
Lo, Yu-Ching
;
Tseng, Hsiao-Fan
;
Chiu, Yu-Jing
;
Wu, Bo-Hao
;
Li, Jia-Wei
Anisotropic polymer particles have attracted great attention because of their unique properties and potential applications in various areas, such as microelectronics, drug delivery, and medical imaging. The fabrication and morphology control, especially the shape recovery, of anisotropic polymer particles, however, remains a challenging task. In this work, we develop a novel strategy to fabricate anisotropic polymer particles by thermally stretching poly(vinyl alcohol) (PVA) films embedding polystyrene (PS) microspheres using a weight. Depending on the preannealing condition, anisotropic PS particles with two different shapes, sharp-headed and blunt-headed PS particles, can be obtained. The PVA films can be selectively removed by isopropanol/water, releasing the anisotropic PS particles. By adding tetrahydrofuran (THF), a good solvent for PS, into the PS particle-containing solutions, the anisotropic particles gradually transform back to spheres to reduce the total interfacial energies. The shape recovery rates of the polymer particles can be controlled by the amount of the added THF. This work not only provides a simple and feasible route to fabricate anisotropic polymer particles but also contributes to a deeper understanding in the solvent-induced shape recovery process from anisotropic polymer particles to polymer spheres.
Two-Step Solvent On-Film Annealing (2-SOFA) Method: Fabrication of Anisotropic Polymer Particles and Implications for Colloidal Self-Assembly
(2018-09-01)
Tseng, Hsiao-Fan
;
Chiu, Yu-Jing
;
Wu, Bo-Hao
;
Li, Jia-Wei
;
Chen, Jiun-Tai
In recent years, anisotropic polymer particles have gained increased interest owing to their special properties and broader applications, such as drug delivery, optical traps, and e-paper display. Most strategies to produce anisotropic polymer particles, however, require sophisticated instruments or additional surfactants. Here, we develop a simple and versatile method, the two-step solvent on-film annealing (2-SOFA) technique, to make anisotropic polymer particles with different shapes. Polystyrene (PS) microspheres spin-coated on poly(methyl methacrylate) (PMMA) films are chosen as model materials. By sequentially annealing the PS/PMMA composites in different solvent vapors, anisotropic polymer particles with distinctive and diverse shapes can be produced, such as half-eaten-peach-shaped, snowman-shaped, and bowler-hat-shaped morphologies. An exquisite selective removal strategy is applied to check the morphologies of the PS/PMMA composite films and to comprehend the transformation mechanism at different annealing steps and times. For particles merged from multiple microspheres, quantitative studies are also performed to figure out the relationships between the sizes of the merged particles and the numbers of the original microspheres. These results have implications for colloidal self-assembly.