Browsing by Author "Wu, Cheng-San"

Now showing 1 - 5 of 5

A Novel Nanoinjection Lithography (NInL) Technology and Its Application for 16-nm Node Device Fabrication
(2011-11-01)
Chen, Hou-Yu
;
Chen, Chun-Chi
;
Hsueh, Fu-Kuo
;
Liu, Jan-Tsai
;
Shy, Shyi-Long
For more than 45 years, photon-and electron-sensitive materials have been used to produce pattern-transfer masks in the lithographic manufacturing of integrated circuits. With the semiconductor technology feature size continuing to shrink and the requirements of low-variability and low-cost manufacturing, optical lithography is driven to its limits. In this paper, we report a novel nanoinjection lithography (NInL) technique that employs electron-beam-assisted deposition to form pattern-transfer hard mask in a direct-write deposit approach. By scanning the 4.6-nm-diameter electron beam while injecting a suitable organometallic precursor gas around the location of e-beam and just above the substrate, we form a high-density (pitch: 40 nm) high-uniformity (3-sigma linewidth roughness: 2 nm) hard mask for subsequent etching without using proximity-effect correction techniques. Furthermore, this technique can also directly deposit a metal pattern for interconnect or a dielectric pattern without the need for separate metal or dielectric deposition, photoresist etch-mask, and etching processes. The NInL approach simplifies the hard-mask creation or even metal or dielectric pattern creation process modules from five or tens of steps to only a single step. Therefore, it saves both photomask making and wafer processing costs. In addition, room-temperature NInL deposition of conductor/dielectric materials enables the fabrication of small versatile devices and circuits. For demonstration, we fabricated a functional 16-nm six-transistor static random access memory (SRAM) cell (area: occupying only 0.039 mu m(2)), 43% the size of the smallest previously reported SRAM cell, using the FinFET structure and a dynamic V(dd) regulator approach. The NInL technique offers a new way of exploring low-volume high-value 16-nm complementary metal-oxide-semiconductor (CMOS) devices and circuit designs with minimal additional investment and obtains early access to extreme CMOS scaling.
A Numerical Study of Si-TMD Contact with n/p Type Operation and Interface Barrier Reduction for Sub-5 nm Monolayer MoS2 FET
(2016-01-01)
Tang, Ying-Tsan
;
Li, Kai-Shin
;
Li, Lain-Jong
;
Li, Ming-Yang
;
Lin, Chang-Hsien
An atomic-scale numerical study of Si contact with transition metal dichalcogenides (TMD) semiconductor materials is proposed by first-principles simulation for the first time. The monolayer MoS2 channel can be operated as both of n- and p-type FET by properly doping Si S/D to adjust the TMD channel potential. The gradient MoSx junction of dichalcogenide vacancies enables Si-MoS2 contact resistance lower than 100 Omega-mu m for interface Schottky barrier height reduction. The compact Si-MoS2 interface study can potentially provide monolayer TMD contact design guideline for the sub-5 nm TMD FET fabrication technology.
Hybrid Si/TMD 2D Electronic Double Channels Fabricated Using Solid CVD Few-Layer-MoS2 Stacking for V-th Matching and CMOS-Compatible 3DFETs
(2014)
Chen, Min-Cheng
;
Lin, Chia-Yi
;
Li, Kai-Hsin
;
Li, Lain-Jong
;
Chen, Chang-Hsiao
Stackable 3DFETs such as FinFET using hybrid Si/MoS 2 channels were developed using a fully CMOS-compatible process. Adding several molecular layers (3-16 layers) of the transition-metal dichalcogenide (TMD), MoS2 to Si fin and nanowire resulted in improved (+25%) I-on,I-n of the FinFET and nanowire FET (NWFET). The PFETs also operated effectively and the N/P device V-th are low and matched perfectly. The proposed heterogeneous Si/TMD 3DFETs can be useful in future electronics.
Threshold Vacuum Switch (TVS) on 3D-Stackable and 4F(2) Cross-Point Bipolar and Unipolar Resistive Random Access Memory
(2012-01-01)
Ho, ChiaHua
;
Huang, Hsin-Hau
;
Lee, Ming-Taou
;
Hsu, Cho-Lun
;
Lai, Tung-Yen
A 3D stackable and bidirectional Threshold Vacuum Switching (TVS) selector using the same WO x material as the RRAM element is reported. It provides the highest reported current density of >10(8) A/cm(2) and the highest selectivity of >10(5). Stress test at high current density indicates >10(8) cycle capability for Reset/Set operation. A mechanism based on recombination of oxygen-ions and vacancies is proposed for the observed volatile switching of TVS. Utilizing the threshold characteristics of the TVS selector, a two-step reading waveform offers potential for 3D-stackable and 4F(2) cross-point RRAM applications.
TMD FinFET with 4 nm Thin Body and Back Gate Control for Future Low Power Technology
(2015)
Chen, Min-Cheng
;
Li, Kai-Shin
;
Li, Lain-Jong
;
Lu, Ang-Yu
;
Li, Ming-Yang
A 4 nm thin transition-metal dichalcogenide (TMD) body FinFET with back gate control is proposed and demonstrated for the first time. The TMD FinFET channel is deposited by CVD. Hydrogen plasma treatment of TMD is employed to lower the series resistance for the first time. The 2 nm thin back gate oxide enables 0.5 V of Vth shift with 1.2 V change in back bias for correcting device variations and dynamically configuring a device as a high performance or low leakage device. TMD can potentially provide sub-nm thin monolayer body needed for 2 nm node FinFET.