Browsing by Author "Yang, C. M."

Now showing 1 - 2 of 2

Design Improvement of a Staggered YBCO Undulator
(2018-04-01)
Chen, S. D.
;
Chiang, C. A.
;
Yang, C. M.
;
Yang, C. K.
;
Luo, H. W.
A strong field and short period undulator can be a desirable light source device in a storage ring or a free-electron laser. Bulk YBCO can be used to construct a high-temperature-superconducting undulator in a staggered array structure. The YBCO material in form of 32 mm diameter and 2.5 mm thick was used to assemble a staggered magnet array. The period length is 5 mm and the magnet gap is 4 mm. To estimate the strength of a sinusoidal field and to optimize the end-pole design to minimize the first (i.e., electron angle) and second field integral (electron position), an energy-minimization method (EM-method) based on Bean's model to simulate the field trapped in the HTS-Block is introduced. In this paper, we focus on promoting the practical value of the EM-method simulation. Combining the experimental experience of a YBCO staggered undulator and the simulation experience based on the EM-method, we address some issues to enhance the efficacy of this undulator design.
Feasibility and Features of a Staggered Undulator Constructed With HTS YBCO Bulks
(2014-06-01)
Chen, S. D.
;
Hwang, C. S.
;
Yang, C. M.
;
Chen, I. G.
;
電子物理學系
A staggered undulator with high-temperature superconducting bulks might be a solution to achieve an undulator with an extremely short period for a synchrotron light source. YBCO bulk was thus selected to investigate the feasibility. This bulk (diameter 32 mm, thickness 2.5 mm) was used to build a staggered-magnet array structure and a mock-up staggered undulator of period 5 mm and fixed gap 4 mm was designed for this test. The potential generation of a sinusoidal field was tested in a 3-T magnetization system with field-cooling magnetization (FCM). The practicability of a HI'S undulator is discussed in regard to the possibility of correction of the local field, repetition of field trapping and long-term stability. In addition, a field simulation concept was developed for designing the staggered undulator with YBCO bulks.