Browsing by Author "Ye, Lei"

Now showing 1 - 2 of 2

Bio-Inspired Flexible Fluoropolymer Film for All-Mode Light Extraction Enhancement
(2019-05-29)
Liang, Renli
;
Hu, Run
;
Long, Hanling
;
Huang, Xinyu
;
Dai, Jiangnan
Enhancing the light extraction efficiency is a prevalent but vital challenge for most solid-state lighting technologies, especially for deep ultraviolet light-emitting diodes (DUV-LEDs). In this paper, inspired by the micro-structure of the butterfly's eye, we propose and fabricate a flexible fluoropolymer film (FFP film) to tackle this issue for all-mode, full-wavelength light extraction enhancement for most solid-state lighting technologies compatibly. The experimental results demonstrate that compared with one mounted with a smooth FFP film, the light output power of DUV-LED is enhanced up to 26.7% by mounting the FFP film with 325 nm radius nanocones at a driving current of 200 mA. Importantly, thanks to the super-flexible feature of the FFP film, it can both cover the top surface and sidewalls of the DUV-LED chip, leading to the improvement of transverse electric and transverse magnetic mode light extraction by 20.5 and 21.8%, respectively. Finite element analysis (FEA) simulations of the electric field distribution of DUV-LEDs with the FFP film reveal the underlying physics. The present strategy is proposed from the view of the packaging level, which is cost-effective, able to be manufactured at a large scale, and compatible with the solid-state lighting technologies.
Interface Anchored Effect on Improving Working Stability of Deep Ultraviolet Light-Emitting Diode Using Graphene Oxide-Based Fluoropolymer Encapsulant
(2018-03-07)
Liang, Renli
;
Dai, Jiangnan
;
Xu, Linlin
;
Zhang, Yi
;
He, Ju
The graphene oxide (GO)-based fluoropolymer is first proposed as an interface encapsulant to improve the light extraction efficiency and achieve the ultralong working stability of deep ultraviolet light-emitting diodes (DUV-LEDs), benefitting from its superior interface performance based on an anchored effect. For the GO-based fluoropolymer composite, the anchored structure is designed to effectively and tightly rivet the quartz lens on the DUV-LED chip by using the interface reaction between GO embedded in fluoropolymer and 3-aminopropyltriethoxy-silane grafted on the surfaces. Experimental results show that on the basis of the interface anchored effect, the air voids in the interface layer of DUV-LED are reduced by 84%, leading to an improvement of the light output power by 15% and a decrease of the junction temperature by 5%, by virtue of the sealing characteristics of the 0.10 wt % GO-based fluoropolymer. In addition, the steady working time is dramatically improved by 660% and it was attributed to the good interface anchored bonding of the 0.10 wt % GO-based fluoropolymer. This novel graphene oxide-based fluoropolymer is believed to provide a feasible and effective interface encapsulant to improve the performance of DUV-LEDs.