Browsing by Author "You, Meng-Lin"

Now showing 1 - 3 of 3

Enhancing Surface Sensitivity of Nanostructure-Based Aluminum Sensors Using Capped Dielectric Layers
(2017-10-01)
Lee, Kuang-Li
;
Tsai, Po-Cheng
;
You, Meng-Lin
;
Pan, Ming-Yang
;
Shi, Xu
The studies of nanostructure-based aluminum sensors have attracted huge attention because aluminum is a more cost-effective plasmonic material. However, the intrinsic properties of the aluminum metal, having a large imaginary part of the dielectric function and a longer electromagnetic field decay length and problems of poor long-term chemical stability, limit the surface-sensing capability and applicability of nanostructures. We propose the combination of capped aluminum nanoslits and a thin-capped dielectric layer to overcome these limitations. We show that the dielectric layer can positively enhance the wavelength sensitivities of the Wood's anomaly-dominant resonance and asymmetric Fano resonance in capped aluminum nanoslits. The maximum improvement can be reached by a factor of 3.5. Besides, there is an optimal layer thickness for the surface sensitivity because of the trade-off relationship between the refractive index sensitivity and decay length. We attribute the enhanced surface sensitivity to a reduced evanescent length, which is confirmed by the finite difference time-domain calculations. The protein-protein interaction experiments verify the high-surface sensitivity of the structures, and a limit of quantification (LOQ) of 1 pg/mL antibovine serum albumin is achieved. Such low-cost, highly sensitive aluminum-based nanostructures can benefit various sensing applications.
Highly Sensitive Aluminum-Based Biosensors using Tailorable Fano Resonances in Capped Nanostructures
(2017-03-08)
Lee, Kuang-Li
;
Hsu, Hsuan-Yeh
;
You, Meng-Lin
;
Chang, Chia-Chun
;
Pan, Ming-Yang
Metallic nanostructure-based surface plasmon sensors are capable of real-time, label-free, and multiplexed detections for chemical and biomedical applications. Recently, the studies of aluminum-based biosensors have attracted a large attention because aluminum is a more cost-effective metal and relatively stable. However, the intrinsic properties of aluminum, having a large imaginary part of the dielectric function and a longer evanescent length, limit its sensing capability. Here we show that capped aluminum nanoslits fabricated on plastic films using hot embossing lithography can provide tailorable Fano resonances. Changing height of nanostructures and deposited metal film thickness modulated the transmission spectrum, which varied from Wood's anomaly-dominant resonance, asymmetric Fano profile to surface plasmon-dominant resonance. For biolayer detections, the maximum surface sensitivity occurred at the dip of asymmetric Fano profile. The optimal Fano factor was close to -1.3. The wavelength and intensity sensitivities for surface thickness were up to 2.58 nm/nm and 90%/nm, respectively. The limit of detection (LOD) of thickness reached 0.018 nm. We attributed the enhanced surface sensitivity for capped aluminum nanoslits to a reduced evanescent length and sharp slope of the asymmetric Fano profile. The protein-protein interaction experiments verified the high sensitivity of capped nanostructures. The LOD was down to 236 fg/mL.
Injection compression molding of transmission-type Fano resonance biochips for multiplex sensing applications
(2019-09-01)
Lee, Kuang-Li
;
You, Meng-Lin
;
Shi, Xu
;
Li, Yi-Ru
;
Ueno, Kosei
Nanostructure-based surface plasmon resonance biosensors have attracted considerable attention since the phenomenon of extraordinary light transmission in metallic nanohole arrays was discovered. However, the mass production of uniform metallic nanostructures with a low-cost, rapid, and high-throughput fabrication process remains a key issue for various multiplex sensing applications. We successfully utilized injection compression molding to mass fabricate transmission-type Fano resonance biochips with a feature size of 60 nm for multiplex sensing applications. Two types of metallic nano structures, aluminum nanoslits and capped aluminum nano slits with 24 sensing arrays, were made on polycarbonate substrates. The bulk sensitivity and uniformity of the nano structure arrays were tested. A Fano resonance with a full-width at half-maximum bandwidth of 8 nm was observed in the visible light region for 470-nm-period capped aluminum nanoslit arrays. The refractive index sensitivity was 460 nm/RIU, and a figure of merit of 58 was achieved. Moreover, aluminum nanoslits had a dip resonance with a bandwidth of 25 nm and a refractive index sensitivity of 463 nm/RIU. The coefficients of variation of the refractive index sensitivities for 24 arrays on a biochip and 10 biochips from different fabrication batches were both below 3%, which indicates that uniform nanostructures can be fabricated by injection compression molding and that the reproducibility is controllable. In addition, the multiplex sensing capability of the aluminum nanostructure arrays was demonstrated by simultaneously monitoring 24 water/glycerin solutions with a hyperspectral imaging system. Protein-protein interactions between bovine serum albumin and anti-bovine serum albumin demonstrated proof of concept of the biological detection capability of the chips. To benefit various multiplex sensing applications such as clinical disease diagnosis, drug screening, and protein biomarker discovery, 96-array aluminum nanoslit biochips the same size as a standard 96-well plate were successfully fabricated. Such a nano structure-based plasmonic biochip produced by a low-cost, rapid, and high-throughput fabrication method can benefit commercial applications. (C) 2019 Elsevier Ltd. All rights reserved.