Browsing by Author "Yu, Shang-Yu"

Now showing 1 - 4 of 4

A Versatile Method to Enhance the Operational Current of Air-Stable Organic Gas Sensor for Monitoring of Breath Ammonia in Hemodialysis Patients
(2019-04-01)
Yu, Shang-Yu
;
Tung, Tin-Wei
;
Yang, Hong-Yu
;
Chen, Guan-Yu
;
Shih, Che-Chi
Point-of-care (POC) application for monitoring of breath ammonia (BA) in hemodialysis (HD) patients has emerged as a promising noninvasive health monitoring approach. In this context, many organic gas sensors have been reported for BA detection. However, one of the major challenges for its integration with affordable household POC application is to achieve stable performance for accuracy and high operational current at low voltage for low-cost read-out circuitry. Herein, we exploited the stability of the Donor Acceptor polymer on the cylindrical nanopore structure to realize the sensors with a high sensitivity and stability. Then, we proposed a double active layer (DL) strategy that exploits an ultrathin layer of Poly(3-hexylthiophene-2,5-diyl) (P3HT) to serve as a work function buffer to enhance the operational current. The DL sensor exhibits a sustainable operational current of microampere level and a stable sensing response even with the presence of P3HT layer. This effect is carefully examined with different aspects, including vertical composition profile of DL configuration, lifetime testing on different sensing layer, morphological analysis, and the versatility of the DL strategy. Finally, we utilize the DL sensor to conduct a tracing of BA concentration in two HD patients before and after HD, and correlate it with the blood urea nitrogen (BUN) levels. A good correlation coefficient of 0.96 is achieved. Moreover, the feasibility of DL sensor integrated into a low-cost circuitry was also verified. The results demonstrate the potential of this DL strategy to be used to integrate organic sensor for affordable household POC devices.
Direct Laser Writing of Crystallized TiO2 and TiO2/Carbon Microstructures with Tunable Conductive Properties
(2018-12-01)
Yu, Shang-Yu
;
Schrodj, Gautier
;
Mougin, Karine
;
Dentzer, Joseph
;
Malval, Jean-Pierre
Metal oxides are an important class of materials for optoelectronic applications. In this context, developing simple and versatile processes for integrating these materials at the microscale and nanoscale has become increasingly important. One of the major remaining challenges is to control the microstructuration and electro-optical properties in a single step. It is shown here that near-infrared femtosecond laser irradiation can be successfully used to prepare amorphous or crystallized TiO2 microstructures in a single step using a direct laser writing (DLW) approach from a TiO2 precursor thin film doped with a suitable dye. When laser writing is conducted under a nitrogen atmosphere, simultaneous to the crosslinking of the Ti-oxide precursor, the graphitization of the organic species embedded in the initial film is observed. In this case, a carbon network is generated within the TiO2 matrix, which significantly increases the conductivity. Moreover, the TiO2/C nanocomposite exhibits piezoresistive behavior that is used in a pressure sensor device. Using this route, it is possible to use DLW to fabricate microsized pressure sensors.
Low-temperature sol-gel oxide TFT with a fluoropolymer dielectric to enhance the effective mobility at low operation voltage
(2017-06-01)
Yu, Shang-Yu
;
Wang, Kuan-Hsun
;
Zan, Hsiao-Wen
;
Soppera, Olivier
;
光電工程學系
In this article, we propose a solution-processed high-performance amorphous indium-zinc oxide (a-IZO) thin-film transistor (TFT) gated with a fluoropolymer dielectric. Compared with a conventional IZO TFT with a silicon nitride dielectric, a fluoropolymer dielectric effectively reduces the operation voltage to less than 3V and greatly increases the effective mobility 40-fold. We suggest that the dipole layer formed at the dielectric surface facilitates electron accumulation and induces the electric double-layer effect. The dipole-induced hysteresis effect is also investigated. (C) 2017 The Japan Society of Applied Physics
Photo-assisted recovery in ammonia sensor based on organic vertical diode
(2019-04-01)
Lin, Yu-Ting
;
Yu, Shang-Yu
;
Zan, Hsiao-Wen
;
Yeh, Ping-Hung
;
Lu, Chia-Jung
In this article, a photo-assisted gas sensor was provided to solve the slow recovering issue of the organic gas sensor. The proposed organic gas sensor can detect ammonia in parts-per-billion regime in 30 s and can be multiple uses, but the long recovery time about 5 min places difficulty to realize rapidly multiple-time sensing. Therefore, we used the photo-absorption ability in the organic semiconductor layer to generate the photocurrent and hence to compensate the current drop due to the ammonia absorption. The recovery time was significantly reduced to be only 1 min. The specific wavelength was also found to match the absorption spectrum in different organic sensing materials. As a comparison, the quartz crystal microbalance (QCM) was used to clarify the gas absorption and desorption mechanism. It is believed that this photo-assisted gas detection could be a general method to solve the slow recovery in organic-based gas sensors.