Browsing by Author "Zhang, Rui"

Now showing 1 - 20 of 21

Biocompatible D-A Semiconducting Polymer Nanoparticle with Light-Harvesting Unit for Highly Effective Photoacoustic Imaging Guided Photothermal Therapy
(2017-04-05)
Zhang, Jinfeng
;
Yang, Caixia
;
Zhang, Rui
;
Chen, Rui
;
Zhang, Zhenyu
The development of nanotheranostic agents that integrate diagnosis and therapy for effective personalized precision medicine has obtained tremendous attention in the past few decades. In this report, biocompatible electron donor-acceptor conjugated semiconducting polymer nanoparticles (PPor-PEG NPs) with light-harvesting unit is prepared and developed for highly effective photoacoustic imaging guided photothermal therapy. To the best of our knowledge, it is the first time that the concept of light-harvesting unit is exploited for enhancing the photoacoustic signal and photothermal energy conversion in polymer-based theranostic agent. Combined with additional merits including donor-acceptor pair to favor electron transfer and fluorescence quenching effect after NP formation, the photothermal conversion efficiency of the PPor-PEG NPs is determined to be 62.3%, which is the highest value among reported polymer NPs. Moreover, the as-prepared PPor-PEG NP not only exhibits a remarkable cell-killing ability but also achieves 100% tumor elimination, demonstrating its excellent photothermal therapeutic efficacy. Finally, the as-prepared water-dispersible PPor-PEG NPs show good biocompatibility and biosafety, making them a promising candidate for future clinical applications in cancer theranostics.
Characteristics of hafnium oxide resistance random access memory with different setting compliance current
(2013-10-14)
Su, Yu-Ting
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Zhang, Rui
In this Letter, the characteristics of set process of hafnium oxide based resistance random access memory are investigated by different set processes with increasing compliance current. Through current fitting, carrier conduction mechanism of low resistance state changes from hopping to surface scattering and finally to ohmic conduction with the increase of setting compliance current. Experimental data of current-voltage measurement under successive increasing temperature confirms the conduction mechanism transition. A model of filament growth is eventually proposed in a way by merging discrete metal precipitates and electrical field simulation by COMSOL Multiphysics further clarifies the properties of filament growth process. (C) 2013 AIP Publishing LLC.
Characterization of Oxygen Accumulation in Indium-Tin-Oxide for Resistance Random Access Memory
(2014-06-01)
Zhang, Rui
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Huang, Syuan-Yong
In this letter, we report the oxygen accumulation effect and its influence on resistive switching for gadolinium-doped silicon dioxide (Gd:SiO2) resistance random access memory (RRAM). We find that oxygen absorbance by indium-tin-oxide electrode affects the conduction current mechanism, and remarkably modifies the device performance of RRAM devices. By current fitting, Schottky emission can be observed in both low and high resistance states, from which conduction model is proposed to clarify the oxygen accumulation phenomenon. Reliability tests, including endurance and high temperature retention are further carried out, evaluating the significance of oxygen accumulation effect in redox reaction for RRAM devices.
Effects of Varied Negative Stop Voltages on Current Self-Compliance in Indium Tin Oxide Resistance Random Access Memory
(2015-06-01)
Lin, Chih-Yang
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Pan, Chih-Hung
We have previously investigated the automatic current compliance property for indium tin oxide (ITO) resistance random access memory (RRAM). Traditionally, for the purpose of protecting RRAM, it is necessary to set equipment current compliance during the set and forming processes of RRAM devices. ITO RRAM devices, however, have an intrinsic capability to limit their current. This letter examines this ITO RRAM current compliance in depth by applying a varied stop-voltage measurement method, where different negative stop voltages were adopted to manipulate oxygen ions. Combined with material analysis and conduction current fitting, a model was established.
Electrical conduction mechanism of Zn:SiOx resistance random access memory with supercritical CO2 fluid process
(2013-08-19)
Chang, Kuan-Chang
;
Tsai, Tsung-Ming
;
Zhang, Rui
;
Chang, Ting-Chang
;
Chen, Kai-Huang
In this study, the electrical conduction mechanism of Zn:SiOx resistance random access memory (RRAM) treated with supercritical CO2 fluid (SCCO2) process was investigated by low temperature measurement. The current of low resistance state for current-voltage curves in SCCO2-treated and untreated Zn:SiOx RRAM were measured and compared under a low temperature range from 100K to 298 K. The electrical conduction mechanisms of hopping conduction and metal-like behaviors in SCCO2-treated and untreated Zn:SiOx RRAM were discussed, respectively. Finally, the electrical conduction mechanism was analyzed and verified by the chemical composition and bonding intensity of XPS analyses. (C) 2013 AIP Publishing LLC.
Endurance Improvement Technology With Nitrogen Implanted in the Interface of WSiOx Resistance Switching Device
(2013-07-01)
Syu, Yong-En
;
Zhang, Rui
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
Incorporation of nitrogen as an oxygen-confining layer in the resistance switching reaction region is investigated to improve the reliability of resistance random access memory (RRAM). The switching mechanism can be attributed to the formation and rupture of conduction filaments. A compatible WSiON (around 5 nm) layer is introduced at the interface of tungsten silicon oxide (WSiOx) and TiN electrode to prevent the randomly diffusing oxygen ions surpassing the storage region of the WSiON layer. The double-layer WSiOx/WSiON memory structure would enhance the endurance over 100 times so as to better confirm the WSiOx RRAM application of nonvolatile memory.
High performance of graphene oxide-doped silicon oxide-based resistance random access memory
(2013-11-21)
Zhang, Rui
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chen, Kai-Huang
In this letter, a double active layer (Zr:SiO (x) /C:SiO (x) ) resistive switching memory device with outstanding performance is presented. Through current fitting, hopping conduction mechanism is found in both high-resistance state (HRS) and low-resistance state (LRS) of double active layer RRAM devices. By analyzing Raman and FTIR spectra, we observed that graphene oxide exists in C:SiO (x) layer. Compared with single Zr:SiO (x) layer structure, Zr:SiO (x) /C:SiO (x) structure has superior performance, including low operating current, improved uniformity in both set and reset processes, and satisfactory endurance characteristics, all of which are attributed to the double-layer structure and the existence of graphene oxide flakes formed by the sputter process.
Highly anisotropic metasurface: a polarized beam splitter and hologram
(2014-09-29)
Zheng, Jun
;
Ye, Zhi-Cheng
;
Sun, Nan-Ling
;
Zhang, Rui
;
Sheng, Zheng-Ming
Two-dimensional metasurface structures have recently been proposed to reduce the challenges of fabrication of traditional plasmonic metamaterials. However, complex designs and sophisticated fabrication procedures are still required. Here, we present a unique one-dimensional (1-D) metasurface based on bilayered metallic nanowire gratings, which behaves as an ideal polarized beam splitter, producing strong negative reflection for transverse-magnetic (TM) light and efficient reflection for transverse-electric (TE) light. The large anisotropy resulting from this TE-metal-like/TM-dielectric-like feature can be explained by the dispersion curve based on the Bloch theory of periodic metal-insulator-metal waveguides. The results indicate that this photon manipulation mechanism is fundamentally different from those previously proposed for 2-D or 3-D metastructures. Based on this new material platform, a novel form of metasurface holography is proposed and demonstrated, in which an image can only be reconstructed by using a TM light beam. By reducing the metamaterial structures to 1-D, our metasurface beam splitter exhibits the qualities of cost-efficient fabrication, robust performance, and high tunability, in addition to its applicability over a wide range of working wavelengths and incident angles. This development paves a foundation for metasurface structure designs towards practical metamaterial applications.
Hopping conduction distance dependent activation energy characteristics of Zn:SiO2 resistance random access memory devices
(2013-04-01)
Chen, Kai-Huang
;
Zhang, Rui
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
In this study, the hopping conduction distance variation of Zn:SiO2 resistance random access memory (RRAM) devices with different operating compliance currents was discussed and verified. To investigate and determine the hopping conduction distance dependent activation energy characteristics, the Arrhenius plot of low resistance state of Zn:SiO2 RRAM devices was applied, from which we proposed carrier conduction model. With the increase of current compliance, more metal ions would accumulate to form precipitates with larger diameter, which in turn resulted in the shortening of hopping distance. Because of shorter hopping distance, activation energy for carrier hopping would decrease. (C) 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4799655]
Hopping Effect of Hydrogen-Doped Silicon Oxide Insert RRAM by Supercritical CO2 Fluid Treatment
(2013-05-01)
Chang, Kuan-Chang
;
Pan, Chih-Hung
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Zhang, Rui
In this letter, we introduced hydrogen ions into titanium metal doped into SiO2 thin film as the insulator of resistive random access memory (RRAM) by supercritical carbon dioxide (SCCO)(2) fluid treatment. After treatment, low resistance state split in to two states, we find the insert RRAM, which means it has an operating polarity opposite from normal RRAM. The difference of the insert RRAM is owing to the resistive switching dominated by hydrogen ions, dissociated from OH bond, which was not by oxygen ions as usual. The current conduction mechanism of insert RRAM was hopping conduction due to the metal titanium reduction reaction through SCCO2.
Improvement mechanism of resistance random access memory with supercritical CO2 fluid treatment
(2014-01-01)
Chang, Kuan-Chang
;
Chen, Jung-Hui
;
Tsai, Tsung-Ming
;
Chang, Ting-Chang
;
Huang, Syuan-Yong
We demonstrated that the supercritical CO2 fluid treatment was a new concept to efficiently reduce the operation current of resistance random access memory. The dangling bonds of tin-doped silicon oxide (Sn:SiOx) thin film were passivated by the hydration-dehydration reaction through supercritical CO2 fluid treatment, which was verified by the XPS and FTIR analyses. The current conduction mechanism of low resistance state in post-treated Sn:SiOx thin film was transferred to hopping conduction from Ohmic conduction. Furthermore, the current conduction mechanism of high resistance state in the memory device was transferred to Schottky emission from Frenkel-Poole conduction. The phenomena were attributed to the discontinuous metal filament formed by hydration-dehydration reaction in Sn:SiOx thin film through supercritical fluid treatment. Finally, a reaction model was proposed to explain the mechanism of current reduction in Sn:SiOx thin film with supercritical CO2 fluid treatment. Crown Copyright (C) 2013 Published by Elsevier B.V. All rights reserved.
Improvement of Resistive Switching Characteristic in Silicon Oxide-Based RRAM Through Hydride-Oxidation on Indium Tin Oxide Electrode by Supercritical CO2 Fluid
(2015-06-01)
Chang, Kuan-Chang
;
Tsai, Tsung-Ming
;
Chang, Ting-Chang
;
Zhang, Rui
;
Chen, Kai-Huang
Supercritical carbon dioxide (SCCO2) fluid technology was applied to indium-tin-oxide (ITO) electrode to improve the resistive switching characteristic of silicon oxide RRAM through hydride oxidation for the first time. We found device power consumption can be effectively reduced so that side effects can be also restricted under device operation. By applying SCCO2 fluid, more oxygen ions will be introduced into the ITO electrode and thus the participation of net oxygen ions in the RRAM redox reaction will increase. Fourier transform spectroscopy and X-ray photoelectron spectroscopy were used to confirm hydride oxidation on ITO electrode. Combined with the current fitting results, we proposed a reaction model to explain the improvement of resistive switching in RRAM by SCCO2 fluids.
Mechanism of power consumption inhibitive multi-layer Zn:SiO2/SiO2 structure resistance random access memory
(2013-12-21)
Zhang, Rui
;
Tsai, Tsung-Ming
;
Chang, Ting-Chang
;
Chang, Kuan-Chang
;
Chen, Kai-Huang
In this paper, multi-layer Zn:SiO2/SiO2 structure is introduced to reduce the operation power consumption of resistive random access memory (RRAM) device by modifying the filament formation process. And the configuration of multi-layer Zn:SiO2/SiO2 structure is confirmed and demonstrated by auger electron spectrum. Material analysis together with conduction current fitting is applied to qualitatively evaluate the carrier conduction mechanism on both low resistance state and high resistance state. Finally, single layer and multilayer conduction models are proposed, respectively, to clarify the corresponding conduction characteristics of two types of RRAM devices. (C) 2013 AIP Publishing LLC.
Mechanism of Triple Ions Effect in GeSO Resistance Random Access Memory
(2015-06-01)
Zhang, Wei
;
Hu, Ying
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
In this letter, a triple-ion redox reaction has been proposed and investigated in GeSO-based resistance random access memory. Continuous multiresistance states can be obtained by applying a series of increasing cutoff voltages in both set and reset processes. Using data retention tests, these multistates in the set and reset processes were confirmed to be stable. The conduction mechanism gradually changed during reset process from space charge limited current to Schottky emission. A triple-ion reaction model has been proposed to reveal the chemical reaction properties in the resistive switching process.
Nitrogen Buffering Effect on Oxygen in Indium-Tin-Oxide-Capped Resistive Random Access Memory With NH3 Treatment
(2015-11-01)
Chen, Ji
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Pan, Chih-Hung
In this letter, we demonstrate the differing influences of a nitrogen buffering effect in both the switching layer and the indium-tin-oxide (ITO) electrode layer of resistive random access memory (RRAM) which has undergone an NH3 treatment. The nitrogen buffering effect in the switching layer cannot counteract the electric field force, leading to similar I-V characteristics compared with the ITO/Hf:SiO2/TiN control structure RRAM. The nitrogen in the ITO electrode layer, however, works as an oxygen buffer and makes it easier for the redox reaction to occur, leading to improvements in performance, such as concentrated voltages and better endurance.
Origin of Hopping Conduction in Graphene-Oxide-Doped Silicon Oxide Resistance Random Access Memory Devices
(2013-05-01)
Chang, Kuan-Chang
;
Zhang, Rui
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Lou, J. C.
In this letter, a double-active-layer (Zr:SiOx/C:SiOx) resistive switching memory device with a high ON/OFF resistance ratio and small working current (0.02 mA), is presented. Through the analysis of Raman and Fourier transform infrared spectroscopy spectra, we find that graphene oxide exists in the C:SiOx layer. It can be observed that Zr:SiOx/C: SiOx structure has superior switching performance and higher stability compared with the single-active-layer (Zr:SiOx) structure, which is attributed to the existence of graphene oxide flakes formed during the sputter process. I-V characteristics under a series of increasing temperature were analyzed to testify the carrier hopping distance variation, which is further verified by our graphene oxide redox reaction model.
Performance and characteristics of double layer porous silicon oxide resistance random access memory
(2013-06-24)
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
;
Zhang, Rui
;
Chang, Ting-Chang
;
Lou, J. C.
A bilayer resistive switching memory device with an inserted porous silicon oxide layer is investigated in this letter. Compared with single Zr:SiOx layer structure, Zr: SiOx/ porous SiOx structure outperforms from various aspects, including low operating voltages, tighter distributions of set voltage, higher stability of both low resistance state and high resistance state, and satisfactory endurance characteristics. Electric field simulation by COMSOL (TM) Multiphysics is applied, which corroborates that intensive electric field around the pore in porous SiOx layer guides the conduction of electrons. The constraint of conduction path leads to better stabilization and prominent performance of bilayer resistive switching devices. (C) 2013 AIP Publishing LLC.
Resistive Switching Mechanism of Oxygen-Rich Indium Tin Oxide Resistance Random Access Memory
(2016-04)
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
;
Chang, Ting-Chang
;
Zhang, Rui
;
Wang, Tong
DThis letter investigates the double-ended resistive switching characteristics of indium tin oxide (ITO) resistance random access memory (RRAM). Resistive switching can be achieved around both the active TiN electrode and the inert Pt electrode. In addition, complementary resistance switching (CRS) characteristics can be observed without current compliance during dc voltage sweep operations. Electrical measurement data fitting results indicate that the oxygen-rich ITO near top and bottom electrodes works as a double-ended resistive switching layer. Based on the analysis of the current conduction mechanism, we propose a physical model to interpret the CRS behaviors in ITO RRAM devices.
Space electric field concentrated effect for Zr:SiO2 RRAM devices using porous SiO2 buffer layer
(2013-12-11)
Chang, Kuan-
;
Huang, Jen-wei
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chen, Kai-Huang
To improve the operation current lowing of the Zr:SiO2 RRAM devices, a space electric field concentrated effect established by the porous SiO2 buffer layer was investigated and found in this study. The resistive switching properties of the low-resistance state (LRS) and high-resistance state (HRS) in resistive random access memory (RRAM) devices for the single-layer Zr:SiO2 and bilayer Zr:SiO2/porous SiO2 thin films were analyzed and discussed. In addition, the original space charge limited current (SCLC) conduction mechanism in LRS and HRS of the RRAM devices using bilayer Zr:SiO2/porous SiO2 thin films was found. Finally, a space electric field concentrated effect in the bilayer Zr:SiO2/porous SiO2 RRAM devices was also explained and verified by the COMSOL Multiphysics simulation model.
The effect of high/low permittivity in bilayer HfO2/BN resistance random access memory
(2013-05-20)
Huang, Jen-Wei
;
Zhang, Rui
;
Chang, Ting-Chang
;
Tsai, Tsung-Ming
;
Chang, Kuan-Chang
This letter investigated the electrical characteristics of resistance random access memory (RRAM) with HfO2/BN bilayer structures. By adopting the high/low permittivity structure, we obtained the excellent device characteristics such as uniform distribution of switching voltage and more stable resistance switching properties of RRAM. The current conduction mechanism of low resistance state in the HfO2/BN device was transferred to space-charge-limited current conduction from Ohmic conduction owing to space electric effect concentrated by the high/low permittivity bilayer structures. The electric field in the bilayer can be verified by COMSOL simulation software. (C) 2013 AIP Publishing LLC.