Browsing by Author "Zhang, Sheng-Dong"

Now showing 1 - 6 of 6

Abnormal C-V Hump Effect Induced by Hot Carriers in Gate Length-Dependent p-Type LTPS TFTs
(2019-11-01)
Huang, Shin-Ping
;
Chen, Po-Hsun
;
Tsao, Yu-Ching
;
Chen, Hong-Chih
;
Zheng, Yu-Zhe
We investigate the abnormal current-voltage (C-V) hump effect of p-type low-temperature polysilicon (LTPS) thin-film transistors (TFTs) which have undergone high current operations. Experimental results indicate localized electron trapping in the gate insulator (GI), which is carried out near the drain. The ON-current ( ${I}_{ \mathrm{\scriptscriptstyle ON}}$ ) enhancement is due to the reduction of effective length, and the OFF-current ( ${I}_{ \mathrm{\scriptscriptstyle OFF}}$ ) decrease as the electron tunneling path distance increases. These can be observed after hot carrier stress in current characteristics. The C-V measurements demonstrate that the threshold voltage ( ${V}_{\text {th}}$ ) shift is associated with the gate length. In addition, capacitance-voltage measurements also show that this localized trapping region remains the same in length, regardless of channel length. Hence, a model is proposed to explain how the electric field, which is gate length-dependent, affects the source side of the device, and then lowers the source barrier height. This leads to bulk leakage, which causes the subthreshold swing degradation at device scale down.
Analyzing Electric Field Effect by Applying an Ultra-Short Time Pulse Condition in Hafnium Oxide-Based RRAM
(2018-08-01)
Wu, Cheng-Hsien
;
Lin, Shih-Kai
;
Pan, Chih-Hung
;
Chen, Po-Hsun
;
Lin, Wen-Yan
In this letter, we determine the importance of the electrical field distribution and strength during the switching process by demonstrating different trends in the degree of reset and the reset pulse time. In general, a longer reset pulse time results in a higher reset energy; a higher reset energy leads to a higher degree of reset, which we obtainedby applying different width square waves. But quite notably, the opposite result was obtained using triangle waves, where a higher degree of reset occurred with a shorter rising time and lower reset energy. We believe that this is due to the electric field effect: if the voltage rises faster than the filament oxidation, the device can produce a larger effective electric field and a higher resistance in the reset process. To further investigate the mechanism, the procedure of the reset process was analyzed in detail, and COMSOL simulation is also carried out for confirmation.
Attaining resistive switching characteristics and selector properties by varying forming polarities in a single HfO2-based RRAM device with a vanadium electrode
(2017-07-07)
Lin, Chih-Yang
;
Chen, Po-Hsun
;
Chang, Ting-Chang
;
Chang, Kuan-Chang
;
Zhang, Sheng-Dong
This study proposes a method for a HfO2-based device to exhibit both resistive switching (RS) characteristics as resistive random access memory (RRAM) and selector characteristics by introducing vanadium (V) as the top electrode. This simple V/HfO2/TiN structure can demonstrate these two different properties depending on forming polarities. The RS mechanism is activated by a positive forming bias. In contrast, the selector property is induced by a negative forming bias. The material analyses firstly confirm the existence of V in the top electrode. Then the electrical measurements for the same V/HfO2/TiN structures but with different forming polarities were carried out to further investigate their DC sweeping characteristics to act as either a selector or RRAM device. Furthermore, reliability tests for both selector and RRAM devices were also conducted to confirm their switching stabilities. Finally, current fitting methods and temperature influence experiments were performed to investigate the carrier transport mechanisms. Finally, physical models were proposed to illustrate the selector property and RS mechanism for selector and RRAM devices, respectively. This simple device structure with its easy operating method accomplishes a significant advancement of devices combining both selector properties and RRAM for remarkable real applications in the near future.
Impact of repeated uniaxial mechanical strain on flexible a-IGZO thin film transistors with symmetric and asymmetric structures
(2017-06-26)
Liao, Po-Yung
;
Chang, Ting-Chang
;
Su, Wan-Ching
;
Chen, Bo-Wei
;
Chen, Li-Hui
This letter investigates repeated uniaxial mechanical stress-induced degradation behavior in flexible amorphous In-Ga-Zn-O thin-film transistors (TFTs) of different geometric structures. Two types of via-contact structure TFTs are investigated: symmetrical and UI structure (TFTs with Iand U-shaped asymmetric electrodes). After repeated mechanical stress, I-V curves for the symmetrical structure show a significant negative threshold voltage (VT) shift, due to mechanical stress-induced oxygen vacancy generation. However, degradation in the UI structure TFTs after stress is a negative VT shift along with the parasitic transistor characteristic in the forward-operation mode, with this hump not evident in the reverse-operation mode. This asymmetrical degradation is clarified by the mechanical strain simulation of the UI TFTs. Published by AIP Publishing.
Investigating degradation behaviors induced by mobile Cu ions under high temperature negative bias stress in a-InGaZnO thin film transistors
(2017-09-25)
Chiang, Hsiao-Cheng
;
Chang, Ting-Chang
;
Liao, Po-Yung
;
Chen, Bo-Wei
;
Tsao, Yu-Ching
This letter investigates the effect of negative bias temperature stress (NBTS) on amorphous InGaZnO4 thin film transistors with copper electrodes. After 2000 s of NBTS, an abnormal subthreshold swing and on-current (I-on) degradation is observed. The recovery of the Id-Vg curve after either annealing or positive bias temperature stress suggests that there are some native mobile copper ions in the active layer. Both the existence of copper and the degradation mechanism can be confirmed by AC stress with different frequencies and by transmission electron microscope energy-dispersive X-ray spectroscopy analysis. Published by AIP Publishing.
The effect of device electrode geometry on performance after hot-carrier stress in amorphous In-Ga-Zn-O thin film transistors with different via-contact structures
(2017-05-15)
Liao, Po-Yung
;
Chang, Ting-Chang
;
Chen, Yu-Jia
;
Su, Wan-Ching
;
Chen, Bo-Wei
In this letter, the effects of hot carriers on amorphous In-Ga-Zn-O thin film transistors (TFTs) of different geometric structures were investigated. Three types of via-contact structure TFTs are used in this experiment, defined as source-drain large (SD large), source-drain normal (SD normal), and fork-shaped. After hot-carrier stress, the I-V curves of both SD normal and fork-shaped TFTs with U-shaped drains show a threshold voltage shift along with the parasitic transistor characteristic in the reverse-operation mode. Asymmetrical degradation is exhibited in an ISE-TCAD simulation of the electric field, which shows the distribution of hot electrons injected into the etch-stop layer below the redundant drain electrode. Published by AIP Publishing.