Design on power-rail ESD clamp circuit for 3.3-V I/O interface by using only 1-V/2.5-V low-voltage devices in a 130-nm CMOS process
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
2193 | en_US |
dc.citation.issue |
10 | en_US |
dc.citation.spage |
2187 | en_US |
dc.citation.volume |
53 | en_US |
dc.citation.woscount |
4 | |
dc.contributor.author |
Ker, Ming-Dou | en_US |
dc.contributor.author |
Chen, Wen-Yi | en_US |
dc.contributor.author |
Hsu, Kuo-Chun | en_US |
dc.contributor.department |
電機學院 | zh_TW |
dc.contributor.department |
College of Electrical and Computer Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:15:40Z | |
dc.date.available |
2014-12-08T15:15:40Z | |
dc.date.issued |
2006-10-01 | en_US |
dc.description.abstract |
A new power-rail electrostatic discharge (ESD) clamp circuit for application in 3.3-V mixed-voltage input-output (I/O) interface is proposed and verified in a 130-nm 1-V/2.5-V CMOS process. The devices in this power-rail ESD clamp circuit are all 1-V or 2.5-V low-voltage nMOS/pMOS devices, which are specially designed without suffering the gate-oxide reliability issue under 3.3-V I/O interface applications. A special ESD detection circuit realized with the low-voltage devices is designed and added in the power-rail ESD clamp circuit to improve ESD robustness of ESD clamp devices by substrate-triggered technique. The experimental results verified in a 130-nm CMOS process have proven the excellent effectiveness of this new proposed power-rail ESD clamp circuit. | en_US |
dc.identifier.doi |
10.1109/TCSI.2006.882818 | en_US |
dc.identifier.issn |
1057-7122 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TCSI.2006.882818 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/11699 | |
dc.identifier.wosnumber |
WOS:000241391700009 | |
dc.language.iso |
en_US | en_US |
dc.subject |
electrostatic discharge (ESD) | en_US |
dc.subject |
ESD protection circuit | en_US |
dc.subject |
high-voltage tolerant | en_US |
dc.subject |
power-rail ESD clamp circuit | en_US |
dc.subject |
substrate-triggered technique | en_US |
dc.title |
Design on power-rail ESD clamp circuit for 3.3-V I/O interface by using only 1-V/2.5-V low-voltage devices in a 130-nm CMOS process | en_US |
dc.type |
Article | en_US |
檔案
- 000241391700009.pdf (714.8 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Ker, M.-D., Chen, W.-Y., & Hsu, K.-C. (2006). Design on power-rail ESD clamp circuit for 3.3-V I/O interface by using only 1-V/2.5-V low-voltage devices in a 130-nm CMOS process. IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS, 53(10), 2187–2193. https://doi.org/10.1109/TCSI.2006.882818
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/11699