Design on power-rail ESD clamp circuit for 3.3-V I/O interface by using only 1-V/2.5-V low-voltage devices in a 130-nm CMOS process

檔案

日期

2006-10-01

類型

系所

期刊名稱

IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS

卷期與頁次

第 53 卷第 10 期,頁 2187–2193

ISSN

1057-7122

語言

英文

摘要

A new power-rail electrostatic discharge (ESD) clamp circuit for application in 3.3-V mixed-voltage input-output (I/O) interface is proposed and verified in a 130-nm 1-V/2.5-V CMOS process. The devices in this power-rail ESD clamp circuit are all 1-V or 2.5-V low-voltage nMOS/pMOS devices, which are specially designed without suffering the gate-oxide reliability issue under 3.3-V I/O interface applications. A special ESD detection circuit realized with the low-voltage devices is designed and added in the power-rail ESD clamp circuit to improve ESD robustness of ESD clamp devices by substrate-triggered technique. The experimental results verified in a 130-nm CMOS process have proven the excellent effectiveness of this new proposed power-rail ESD clamp circuit.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Ker, M.-D., Chen, W.-Y., & Hsu, K.-C. (2006). Design on power-rail ESD clamp circuit for 3.3-V I/O interface by using only 1-V/2.5-V low-voltage devices in a 130-nm CMOS process. IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS, 53(10), 2187–2193. https://doi.org/10.1109/TCSI.2006.882818

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/11699